Nano-segregated polymeric film exhibiting high ionic conductivities

Nanostructures can be used for the fabrication of highly functional materials transporting ions and charges. We demonstrate a new design strategy for polymeric higher ion-conductors. Phase-segregated layers of alternating mobile tetra(ethylene oxide)s (TEOs) and rigid aromatic cores where the TEO moieties are grafted from aromatic layers have been shown to be efficient to transport lithium triflate. Such segregated structures at the nanometer scale (nano-segregated structures) were prepared by in-situ photopolymerization of an aligned methacrylate liquid crystalline monomer comprising a terphenyl rigid rod mesogen having a TEO terminal chain. The ion-conductive TEO moiety remains in the highly mobile state even after polymerization, which is indicated by its low glass transition temperature (-45 degrees C). This nanostructured film exhibits an ionic conductivity parallel to the layer of 10(-3) S cm(-1) at room temperature. The highest ionic conductivity is in the level of 10(-2) S cm(-1) observed at 150 degrees C. The anisotropic ionic conductivities have been observed for the nano-segregated film.     

Efficient optical resolution of secondary alkyl alcohols by chiral supramolecular hosts

A novel tunable multi-chiral supramolecular host system was developed from non-chiral dicarboxylic acid and (1R, 2R)-diphenylethylenediamine via chirality transfer, which enabled highly efficient optical resolution of secondary alkyl alcohols by simple crystallization of host compounds from alcohol solution.     

Gas chromatographic-mass fragmentographic determination of propiverine and its metabolites in plasma and urine

1-Methyl-4-piperidyl diphenylpropoxyacetate hydrochloride has been developed clinically for the therapy of urinary bladder dysfunction. A gas chromatographic-mass fragmentographic method was developed for the determination of this drug and its seven metabolites in plasma and urine. The sample was first treated with a Sep-Pak C18 cartridge, the methanol eluate was evaporated to dryness, and the resulting residue was redissolved in distilled water. This solution was then extracted with chloroform and adjusted to pH 9.0 with 0.1 M sodium borate solution. The acidified aqueous layers were extracted with ethyl acetate. The chloroform layer, which contained non-polar metabolites, was concentrated to dryness, then subjected to trifluoroacetylation, decomposition and methylation. The extract from the plasma sample was trimethylsilylated. The dried residue of the ethyl acetate layer, which contained polar metabolites, was subjected to methylation, trifluoroacetylation and decomposition. Aliquots of each reactant solution were injected into the gas chromatograph-mass spectrometer and analysed by the selected-ion monitoring method using an internal standard. Detection was limited to 1-2 ng/ml of plasma and urine for each metabolite. A precise and sensitive assay for the determination of 1-methyl-4-piperidyl diphenylpropoxyacetate hydrochloride and its metabolites in plasma and urine was thus established, and it should prove useful in basic and clinical pharmacological studies.     

Soluble hyperbranched polymer through initiator-fragment incorporation radical copolymerization of ethylene glycol dimethacrylate and α-ethyl β-N-(α-methylbenzyl) itaconamate in benzene

The copolymerizations of ethylene glycol dimethacrylate (EGDM) with α-ethyl β-N-(α^′-methylbenzyl) itaconamates (RS- and S-EMBIs) derived from (RS)- and (S)-α-methylbenzylamines were conducted at 70 and 80 °C in benzene using dimethyl 2,2^′-azobisisobutyrate (MAIB) of high concentration as initiator. The copolymerization of EGBM (0.20 mol/l) and RS-EMBI (0.50 mol/l) with MAIB (0.50 mol/l) proceeded homogeneously without any gelation in benzene to give benzene-soluble copolymer in a yield of 55% based on the total weight of EGDM, RS-EMBI and MAIB. The copolymer was soluble in acetone, ethyl acetate, chloroform, tetrahydrofuran (THF), toluene, N,N-dimethylformamide and insoluble in n-hexane, methanol, dimethyl sulfoxide, and water. The copolymerization system involved ESR-observable propagating radicals derived from EGDM and RS-EMBI, of which the total concentration increased with time in spite of the homogeneous system. The copolymer consisted of EGDM unit (25 mol%), RS-EMBI unit (45 mol%), and methoxycarbonylpropyl group as MAIB-fragment (30 mol%). Such a large number of initiator fragments were incorporated into the copolymer as terminal groups through initiation and primary radical termination, leading to a conclusion that the copolymer was of hyperbranched structure (initiator-fragment incorporation radical copolymerization). Radius of gyration (R_g) and M_w of the copolymer by light scattering measurements in THF were 17.8 nm and 7.7 × 10⁵, respectively. Comparison of these values with those (R_g=27.6 nm and M_w=2.9×10⁵) of linear polystyrene also supported the above conclusion. Reflecting the compact hyperbranched structure, the intrinsic viscosity ([η]) of the copolymer was very low, [η]=0.075 dl/g at 25 °C in THF. The individual copolymer molecules were observed as a nanoparticle by TEM. The copolymerization of EGDM and S-EMBI with MAIB in benzene also gave similar results.     

Orally active CCR5 antagonists as anti-HIV-1 agents: synthesis and biological activity of 1-benzothiepine 1,1-dioxide and 1-benzazepine derivatives containing a tertiary amine moiety

The search for orally active CCR5 antagonists was performed by chemical modification of the 1-benzothiepine 1,1-dioxide 3 and 1-benzazepine 4 lead compounds containing a tertiary amine moiety. Replacement of methyl group with a 2-(C(2-4) alkoxy)ethoxy group at the 4-position on the 7-phenyl group of the 1-benzothiepine ring resulted in both enhanced activity and significant improvement in the pharmacokinetic properties upon oral administration in rats. Introduction of C(2-4) alkyl, phenyl or (hetero)arylmethyl groups as the 1-substituent on the 1-benzazepine ring together with the 2-(butoxy)ethoxy group led to further increase of activity. Among the 1-benzazepine derivatives, the isobutyl (6i), benzyl (6o) or 1-methylpyrazol-4-ylmethyl (6s) compounds were found to exhibit highly potent inhibitory effects, equivalent to the injectable CCR5 antagonist 1, in the HIV-1 envelope-mediated membrane fusion assay. In particular, compound 6s showed the most potent CCR5 antagonistic activity (IC(50)=2.7 nM) and inhibitory effect (IC(50)=1.2 nM) on membrane fusion, together with good pharmacokinetic properties in rats. The synthesis of 1-benzothiepine 1,1-dioxide and 1-benzazepine derivatives and their biological activity are described.     

Molecular design and evaluation of quinoxaline-carbohydrate hybrids as novel and efficient photo-induced GG-selective DNA cleaving agents

Quinoxaline, found in antitumor quinoxaline antibiotics, was found to cleave double stranded DNA at the 5' side guanine of 5'-GG-3' site on irradiation with long wavelength UV light without any additive; furthermore, a bis(quinoxaline-carbohydrate) hybrid system was very effective for DNA cleavage.     

Lignin-Silica-Titania Hybrids as Precursors for Si–Ti–C–O Fibers

Lignin-silica-titania and lignin-titania hybrid fibers have been prepared by sol-gel processing from lignin, tetraethoxysilane, and titanium tetrakis(2,4-pentanedionate) using a mixture of 2,4-pentanedione and tetrahydrofuran as solvent and H2SO4 as catalyst. Amounts of H2O and H2SO4, to add to the solutions with the Si-to-Ti atomic ratios of 0–1.0, were determined for achieving favorable spinnability of fibers from the solutions. The FT-IR spectrum of the fibers indicated the formation of hybrid fibers. The hybrid fibers, cured in air to avoid coalescense, could be converted into Si–Ti–C and TiC fibers upon pyrolysis at 1500°C in Ar.     

Preparation of new photosensitive TiO2 gel films using chemical additives including nitrogen and their patterning

TiO₂ gel films were prepared from titanium tetra-n-butoxide chemically modified with benzoylacetoanilide including nitrogen by the sol-gel method. The obtained gel film showed an absorption band, characteristic of the chelate ring, at 325 nm. The absorption band disappeared almost completely with UV-irradiation (2.7 J cm⁻²) using a high pressure mercury lamp. This indicates that the gel film exhibits photosensitivity. The decomposition rate of the chelate ring was the fastest in the photosensitive TiO₂ gel films which we have examined. Using the photosensitivity, fine patterns (about 5 μm) could be fabricated by UV-irradiation through a mask and leaching.     

Exceptionally Persistent Nitrogen-Centered Free Radicals. Syntheses, ESR Spectra, Isolation, and X-ray Crystallographic Structures of N-(Arylthio)-2-tert-butyl-4,6-diarylphenylaminyl and N-(Arylthio)-4-tert-butyl-2,6-diarylphenylaminyl Radicals(1)

The preparation, ESR spectra, isolation, and X-ray crystallographic structure of N-(arylthio)-2-tert-butyl-4,6-diarylphenylaminyls (1) and N-(arylthio)-4-tert-butyl-2,6-diarylphenylaminyls (2) are described. The aminyls are generated by PbO(2) oxidation of N-(arylthio)-2-tert-butyl-4,6-diarylanilines and N-(arylthio)-4-tert-butyl-2,6-diarylanilines. The kinetic ESR study shows that the aminyls are quite persistent, even in the presence of oxygen, and exist in the individual radical forms. Among the seventeen aminyls prepared, N-[(4-nitrophenyl)thio]-2-tert-butyl-4,6-diphenylphenylaminyl (1b), N-[(4-nitrophenyl)thio]-2-tert-butyl-4,6-bis(4-chlorophenyl)phenylaminyl (1f), N-[(4-nitrophenyl)thio]-4-tert-butyl-2,6-diphenylphenylaminyl (2b), N-[(4-nitrophenyl)thio]-4-tert-butyl-2,6-bis(4-chlorophenyl)phenylaminyl (2h), and N-[(3,5-dichlorophenyl)thio]-4-tert-butyl-2,6-bis(4-chlorophenyl)phenylaminyl (2j) are isolated as radical crystals. The crystallographic structures of 1b and 2b are determined by the X-ray crystallographic analyses. Aminyls 1 and 2 give similar ESR spectra consisting of 1:1:1 triplets with the a(N) values of 0.921-0.948 mT. Deuteration of the phenyl groups on the anilino benzene ring gives rise to a further splitting of the nitrogen 1:1:1 triplet by the anilino meta (0.126-0.138) and phenylthiyl ortho and para protons (0.077-0.096 mT). Upon recording at high gain, one of the partly deuterated aminyls gives satellite lines due to (33)S isotopes at natural abundance from which a(33)(S) is determined to be 0.51 mT. The ESR parameters for 1 and 2 are compared with those for structurally close N-(arylthio)-2,4,6-triarylphenylaminyl and N-(arylthio)-2,4,6-tri-tert-butylphenylaminyl.