Statistical behavior of post-shock overpressure past grid turbulence

When a shock wave ejected from the exit of a 5.4-mm inner diameter, stainless steel tube propagated through grid turbulence across a distance of 215 mm, which is 5–15 times larger than its integral length scale \(L_{u}\) , and was normally incident onto a flat surface; the peak value of post-shock overpressure, \(\Delta P_{\mathrm{peak}}\) , at a shock Mach number of 1.0009 on the flat surface experienced a standard deviation of up to about 9 % of its ensemble average. This value was more than 40 times larger than the dynamic pressure fluctuation corresponding to the maximum value of the root-mean-square velocity fluctuation, \(u^{\prime }= 1.2~\hbox {m}/\hbox {s}\) . By varying \(u^{\prime }\) and \(L_{u}\) , the statistical behavior of \(\Delta P_{\mathrm{peak}}\) was obtained after at least 500 runs were performed for each condition. The standard deviation of \(\Delta P_{\mathrm{peak}}\) due to the turbulence was almost proportional to \(u^{{\prime }}\) . Although the overpressure modulations at two points 200 mm apart were independent of each other, we observed a weak positive correlation between the peak overpressure difference and the relative arrival time difference.     

Linear and nonlinear inversion schemes to retrieve collision kernel values from droplet size distribution change

This study presents an attempt to retrieve collision kernel values from changes in the droplet size distribution due to collision growth. Original linear and nonlinear inversion schemes are presented, which use the simple a priori assumption that the total collision rate is given by the sum of the gravitational and turbulent contributions. Our schemes directly handle binned (discretized) size distributions and, therefore, do not require any assumptions on distribution functional forms, such as the self-similarity assumption. To validate the schemes, three-dimensional direct numerical simulation (DNS) of colliding droplets in steady isotropic turbulence is performed. In the DNS, air turbulence is calculated using a pseudo-spectral method, while droplet motions are tracked by the Lagrangian method. Comparison between the retrieved collision kernels and the collision kernels obtained directly from the DNS show that for low Reynolds number flows both the linear and nonlinear inversion schemes give good accuracy. However, for higher Reynolds number flows the linear inversion scheme gives significantly larger retrieval errors, while the errors for the nonlinear scheme remain small.     

Asymmetric total synthesis of danicalipin A and evaluation of biological activity

Asymmetric total synthesis of danicalipin A was achieved. The synthesis was characterized by diastereoselective introduction of chlorine atoms. Biological activities with synthetic danicalipin A, its enantiomer, and racemate were also evaluated toward brine shrimp. Both enantiomers of danicalipin A showed almost the same activity.     

Impact of metal-ion dependence on the porous and electronic properties of TCNQ-dianion-based porous coordination polymers

A series of TCNQ-dianion-based porous coordination polymers [M(TCNQ)bpy] (M = Fe, Zn, Mn, Co, Cd) have been synthesized and characterized. The synthesis reactions of these compounds are promoted by the addition of ascorbic acid, which is the key to obtaining a high yield. They form almost identical three-dimensional pillared layer structures with the M-TCNQ two-dimensional layers linked by bpy pillar ligands. The electronic properties of these compounds vary depending on the constitutional metal ions and guest molecules. We found that the electronic interaction between metal ions and TCNQ moieties in the frameworks strongly impacted the electronic properties of the compounds.     

Folding of a supramolecular framework based on a tetrametallic clip driven by π-π interactions

Supramolecular extended frameworks based on a rotational molecular clip and having the same "primary structure" can exhibit either an unfolded or a folded framework. This process is driven by intramolecular π-π interactions, resulting in the formation of an infinite π-stacked column within the folded supramolecular framework.     

Synthesis and crystal structure of a Pr5Ni19 superlattice alloy and its hydrogen absorption-desorption property

The intermetallic compound Pr(5)Ni(19), which is not shown in the Pr-Ni binary phase diagram, was synthesized, and the crystal structure was investigated by X-ray diffraction (XRD) and transmission electron microscopy (TEM). Two superlattice reflections with the Sm(5)Co(19)-type structure (002 and 004) and the Pr(5)Co(19)-type structure (003 and 006) were observed in the 2θ region between 2° and 15° in the XRD pattern using Cu Kα radiation. Rietveld refinement provided the goodness-of-fit parameter S = 6.7 for the Pr(5)Co(19)-type (3R) structure model and S = 1.7 for the Sm(5)Co(19)-type (2H) structure model, indicating that the synthesized compound has a Sm(5)Co(19) structure. The refined lattice parameters were a = 0.50010(9) nm and c = 3.2420(4) nm. The high-resolution TEM image also clearly revealed that the crystal structure of Pr(5)Ni(19) is of the Sm(5)Co(19) type, which agrees with the results from Rietveld refinement of the XRD data. The P-C isotherm of Pr(5)Ni(19) in the first absorption was clearly different from that in the first desorption. A single plateau in absorption and three plateaus in desorption were observed. The maximum hydrogen storage capacity of the first cycle reached 1.1 H/M, and that of the second cycle was 0.8 H/M. The 0.3 H/M of hydrogen remained in the metal lattice after the first desorption process.     

Total synthesis of 10-isocyano-4-cadinene and its stereoisomers and evaluations of antifouling activities

The first enantioselective total synthesis of 10-isocyano-4-cadinene, a marine sesquiterpene isolated from nudibranchs of the family Phyllidiidae, and determination of its absolute stereochemistry were achieved. 10-Isocyano-4-cadinene is expected to be a novel nontoxic antifouling agent. In the synthesis, intermolecular Diels-Alder reaction and samarium diiodide induced Barbier-type cyclization were employed as key steps. The absolute configuration of 10-isocyano-4-cadinene was determined as (1S,6S,7R,10S) by comparison of the optical rotations between natural and synthetic samples. In addition, the authors successfully synthesized 10-epi- and di-1,6-epi-10-isocyano-4-cadinene through the same synthetic pathway. Antifouling activities against Balanus amphitrite with the cadinenes were also evaluated.     

Versatile site-specific conjugation of small molecules to siRNA using click chemistry

We have previously demonstrated that conjugation of small molecule ligands to small interfering RNAs (siRNAs) and anti-microRNAs results in functional siRNAs and antagomirs in vivo. Here we report on the development of an efficient chemical strategy to make oligoribonucleotide-ligand conjugates using the copper-catalyzed azide-alkyne cycloaddition (CuAAC) or click reaction. Three click reaction approaches were evaluated for their feasibility and suitability for high-throughput synthesis: the CuAAC reaction at the monomer level prior to oligonucleotide synthesis, the solution-phase postsynthetic "click conjugation", and the "click conjugation" on an immobilized and completely protected alkyne-oligonucleotide scaffold. Nucleosides bearing 5'-alkyne moieties were used for conjugation to the 5'-end of the oligonucleotide. Previously described 2'- and 3'-O-propargylated nucleosides were prepared to introduce the alkyne moiety to the 3' and 5' termini and to the internal positions of the scaffold. Azido-functionalized ligands bearing lipophilic long chain alkyls, cholesterol, oligoamine, and carbohydrate were utilized to study the effect of physicochemical characteristics of the incoming azide on click conjugation to the alkyne-oligonucleotide scaffold in solution and on immobilized solid support. We found that microwave-assisted click conjugation of azido-functionalized ligands to a fully protected solid-support bound alkyne-oligonucleotide prior to deprotection was the most efficient "click conjugation" strategy for site-specific, high-throughput oligonucleotide conjugate synthesis tested. The siRNA conjugates synthesized using this approach effectively silenced expression of a luciferase gene in a stably transformed HeLa cell line.     

Basic Study of Lanthanide Nitrate Species in Solution by Electrospray Ionization Mass Spectrometry

Lanthanide nitrate (Ln(NO₃)₃) solutions were analyzed by electrospray ionization mass spectrometry (ESI-MS) to characterize the solution states of the lanthanides. The following monomer species were observed: [Ln(OH)(H₂O) _j ]²⁺, [Ln(OH)₂(H₂O) _k ]⁺, [Ln(NO₃)(OH)(H₂O) _l ]⁺ and [Ln(NO₃)₂(H₂O) _m ]⁺ (j,k,l,m: numbers of adducted H₂O). The peak intensity ratio of each Ln species was calculated from the peak intensity of the Ln species divided by the total peak intensity of all the Ln species. The change in the relative peak intensities of [Ln(OH)(H₂O) _j ]²⁺ and [Ln(OH)₂(H₂O) _k ]⁺ was consistent with changes in the hydration number of Ln (La to Tb: 9, Tb to Lu: 8). The behavior of the relative peak intensity of [Ln(NO₃)(OH)(H₂O) _l ]⁺ against the atomic number of Ln was similar to those of the stability constants of the lanthanides and the nitrate group. ESI-MS is expected to be a useful technique for examining lanthanide reactions in solution.     

Palladium-catalyzed borylation of sterically demanding aryl halides with a silica-supported compact phosphane ligand

Immobile but active: A silica-supported "compact" phosphane, Silica-SMAP, can be used in the Pd-catalyzed borylation of aryl chlorides or bromides with bis(pinacolato)diboron. The Silica-SMAP/Pd system significantly expands the substrate scope of the borylation toward sterically and electronically challenging aryl halides.