仿生制备有机-无机复合微囊固定化葡萄糖氧化酶

将层层自组装技术与仿生矿化技术相结合,由聚苯乙烯磺酸钠、聚二甲基二烯丙基氯化铵和二氧化硅成功制备(聚苯乙烯磺酸钠-聚二甲基二烯丙基氯化铵)₂-二氧化硅复合微囊.采用扫描电子显微镜、红外光谱和热重对微囊的形貌和化学结构进行了表征.以该复合微囊作为理想载体固定化葡萄糖氧化酶.结果表明,固定于复合微囊中的葡萄糖氧化酶的热稳定性、pH稳定性、操作稳定性得到了提高;在最适条件下,复合微囊固定化葡萄糖氧化酶的酶活回收率为72.85%,米氏常数是游离葡萄糖氧化酶的2.21倍.复合微囊在化学/生物催化、药物/基因传递系统和生物传感器应用方面具有一定的潜能.     

SAPO-11分子筛晶化过程研究

采用X射线衍射、X射线荧光光谱、扫描电镜和固体核磁等方法研究了SAPO-11分子筛的水热晶化过程.结果表明,晶化初期,SAPO-11和一种具有磷硅铝组成的未知晶相同时生成;随着晶化的进行,中间相溶解,SAPO-11的生成速率大大增加,呈现快速晶化的特征;至2.33h后,SAPO-11的结晶度接近100%,并保持至晶化结束.硅从晶化初期即参与了SAPO-11的形成,它在晶体中的含量随晶化时间的延长而逐渐增加.硅原子主要以硅岛的形式分布于SAPO-11分子筛骨架中,从而导致多种硅配位环境的存在.分析显示,SAPO-11分子筛呈现外表面富硅的特点,结合晶化过程的分析可推测,硅在SAPO-11分子筛晶体中的分布不均匀,其含量从内向外递增.     

纳米碳材料非金属催化的研究进展

纳米碳材料直接作为催化剂的非金属碳催化是目前材料科学与催化领域的前沿方向之一.相对于传统金属催化剂,纳米碳材料催化剂具有高效环保、低能耗、耐腐蚀等优点.在烃类转化、化学品合成、能源催化等领域表现出优异的催化性能和发展潜力.综述了近年来纳米碳非金属催化研究的最新进展,主要包括新型纳米碳材料的表面性质、催化特性、反应机理和宏观制备等关键问题,并对纳米碳催化存在的挑战和前景进行了展望.     

巯基功能化介孔材料高效锚定钯负载型催化剂的制备及其苯酚加氢催化性能

以含巯基官能团有机硅烷修饰的介孔材料MCM-41和SBA-15为载体, 采用浸渍-氢气还原法制备了高分散和高活性的负载型Pd催化剂. X射线衍射、N₂吸附-脱附和透射电子显微镜表征结果显示, 所制Pd催化剂Pd-SH-MCM-41和Pd-SH-SBA-15具有很好的长程有序结构、分布均匀的孔径、高比表面积及高度分散的Pd颗粒. 苯酚加氢反应结果表明, 以Pd-SH-MCM-41和Pd-SH-SBA-15为催化剂时, 在80℃, 1.0MPa反应1h, 苯酚转化率达99%以上, 环己酮选择性为98%. 它们的催化活性为商业Pd/C催化剂的5倍, Pd/MCM-41和Pd/SBA-15催化剂的3倍. 这可归因于介孔材料表面修饰的巯基官能团对Pd的锚定作用, 避免了Pd颗粒的团聚, 使其高度分散在介孔材料上.     

碳纳米管担载纳米Ir催化生物质基乙酰丙酸合成γ-戊内酯

以碳纳米管(CNTs)担载Ir纳米粒子为催化剂进行生物质基平台化合物乙酰丙酸(LA)选择加氢制备γ-戊内酯(GVL)的研究,并利用X射线衍射、X射线光电子能谱和透射电镜表征了使用前后的Ir/CNT催化剂,探讨了影响LA催化加氢制GVL反应性能的因素和该反应的可能路径.结果表明,与Ru,Rh和Pd等传统铂族金属相比,Ir/CNT催化剂不但可在温和条件下(50℃,2.0 MPa,H₂)实现LA至GVL的完全转化,且可对多类直接源于生物质水解的含等量LA/甲酸的“真实”体系实现GVL的高效选择合成.     

钙钛矿型氧化物负载纳米金属催化剂结构的动态调变及其催化氧化CO反应性能

研究了钛酸钡和钛酸钙担载的Ag和Pt纳米催化剂的表面结构随氧化-还原处理过程的动态变化及其对CO完全氧化反应性能的影响.发现氧化物担载的Ag催化剂在氧化处理后其催化活性较还原处理的高; X射线衍射(XRD)和X射线光电子能谱(XPS)表征结果表明,氧化处理能够提高载体表面Ag颗粒的分散度,而还原处理导致Ag颗粒的聚集,从而降低了催化氧化CO反应的活性.氧化-还原处理改变了担载Ag纳米粒子的尺寸并影响其CO氧化反应活性.与此相反,氧化物担载的Pt催化剂在还原处理后所表现出的CO氧化反应活性较氧化处理的高; 对比研究发现,氧化和还原处理后Pt纳米粒子的尺寸基本相同,但是氧化处理的样品中Pt表面物种以氧化态为主,而还原处理后Pt表面物种主要为金属态.Pt纳米粒子表面化学状态随氧化-还原处理的调变是导致表面催化活性差异的主要原因.     

Synthesis and Crystal Structure of Novel Mixed-metal Alkoxide Clusters of Ytterbium and Sodium: Yb4O4（OiPr）16Na12

The mixed-metal cluster Yb4O4(OiPr)16Na12 has been synthesized and structurally determined by IR, elemental analysis, and single-crystal X-ray diffraction. The crystal belongs to the cubic system, space group P23 with a = b = c = 13.9788(3), V = 2731.55(10)3 , Z = 1, Dc = 1.202 g/cm 3 , Mr = 1977.42, = 3.480 mm-1 , F(000) = 972, the final R = 0.0288 and wR = 0.1511 for 1677 observed reflections with Ⅰ > 2σ(Ⅰ). X-ray analysis reveals that Yb4O4 (OiPr)16Na12 is centrosym-metric and the structure contains four ytterbium metals and twelve sodium metals, and each ytterbium atom is coordinated by six oxygen atoms. In addition, an ancillary computational analysis of the optimized molecular unit was provided. The large energy gap (3.31 eV) between HOMO and LUMO indicates that the structure framework is particularly stable.     

Effect of Plasma Treatment on the Structures and Properties of Konjac Glucomannan Film

To understand the effect of plasma treatment on the Konjac glucomannan film, the nitrogen plasma was injected into the film by ion beam injection machine in this study. The structures and properties of Konjac glucomannan film after plasma treatment were analyzed by Infrared spectroscopy, Raman spectrum, X-ray, ect. The result showed that nitrogen groups appeared in the KGM molecular chain and part of this chain fractured, and the number of hydrogen bonds increased after the treatment of plasma. The form of KGM molecule remained amorphous non-crystalline state, but the crystalline region was increased and became more ordered. The mechanical property of tensile strength and breaking elongation was improved, while the WVP was decreased. The nitrogen groups were grafted on the KGM molecular chain after plasma treatment, which led to the improvement of the properties of KGM film.     

Solid-phase extraction clean-up procedure for the analysis of PAHs in lichens

A clean-up procedure based on a solid-phase extraction column was optimized for determination of polycyclic aromatic hydrocarbons (PAHs) in lichen extracts to remove co-extracted compounds from the matrix in the final extract. Several kinds of solid phases were evaluated: normal phase (-NH₂ and alumina), strong anion exchange and reversed phase. The -NH₂ columns were the most effective by using a packed solid bed of 500?mg. The lichen raw extract was loaded on the column previously conditioned with dichloromethane and hexane. Hexane (0.5?mL) was used as rinsing solvent, and PAHs were quantitatively eluted (80–97%) using 2?mL of hexane–dichloromethane (65–35) as eluting solvent. In these conditions, even the heaviest PAHs were quantitatively eluted. The optimized SPE method provides a short time and low-solvent-consumption sample clean-up compared with other conventional methods based on column chromatography. The analytical procedure, dynamic sonication-assisted extraction, followed by the optimized solid-phase extraction clean-up, was used to determine the 16 EPA priority PAHs from native lichens collected from the Aragon valley in central Pyrenees. The PAH concentrations in lichen samples ranged from 352 to 1654?ng?g^?1, and the minimum concentration value was established as the regional reference PAH levels in the area.     

Monitoring of di-(2-ethylhexyl)phthalate,nonylphenol, nonylphenol ethoxylates,and polychlorinated biphenyls in anaerobic and aerobic sewage sludge by gas chromatography–mass spectrometry

The occurrence of di-(2-ethyhexyl)phthalate (DEHP), nonylphenol and nonyphenol mono- and diethoxylates (NPEs) and seven polychlorinated biphenyl (PCB) congeners in different types of sludge samples is reported. The analysis of these compounds was carried out by sonication-assisted extraction and analytical determination by gas chromatography coupled with a mass spectrometry detector, following a previously described method. The applicability of the method was tested by monitoring the organic pollutants in primary, secondary, mixed, and digested-dehydrated sludge samples from two wastewater treatment plants (WWTPs) based on aerobic and on anaerobic biological stabilization. The occurrence of these compounds in sewage sludge and the influence of sludge stabilization process on the further farmland application of the sludge were evaluated. DEHP and NPEs were detected in all analysed sludge samples from both WWTPs at concentration levels in the range of 22.3–601?mg?kg^?1 and 136–2357?mg?kg^?1 dm (dry matter), respectively. PCBs were detected in all types of sludge analysed from the anaerobic WWTP but was not detected in any sludge sample from the aerobic WWTP. Concentration levels of the sum of the seven PCBs congeners were up to 1.5?mg?kg^?1 dm. The concentration of DEHP, sum of NPEs, and sum of the seven PCB congeners were higher than the limits fixed in the third draft of the future Sludge Directive for land application of sludge in the 67%, 100%, and 11% of samples from the anaerobic WWTP and in the 83%, 92%, and 0% of samples from the aerobic WWTP, respectively.