Electrochemical kinetics of nanosized Ag and Ag2O thin films prepared by radio frequency magnetron sputtering

Ag and Ag₂O thin films have been prepared by radio frequency magnetron sputtering on Cu substrates and have been characterized by X-ray diffraction, scanning electron microscope and atomic force microscope. The electrochemical performance of the thin films has been studied by galvanostatic cycling and cyclic voltammetry. The potential dependence of Li-ion chemical diffusion coefficients, [(D)\tilde]_\textLi {\widetilde{D}_{\text{Li}}} , of the films has been determined by galvanostatic intermittent titration technique and electrochemical impedance spectroscopy. It is found that Li-ion chemical diffusion coefficients of the Ag film range from 10⁻¹⁶ to 3 × 10⁻¹⁴ cm² s⁻¹. The Ag/Li₂O composite that is formed from Ag₂O after the first cycle exhibits higher [(D)\tilde]_\textLi {\widetilde{D}_{\text{Li}}} values than the Ag film, especially at a low Li-intercalation content. The phase transitions in the two-phase region cause a significant decrease of chemical diffusion coefficients.     

In situ measurement of crystallization of oxide thin films during irradiation with pulsed UV laser in chemical solution deposition process

The epitaxial and polycrystalline growth of lanthanum strontium manganite films on single crystalline strontium titanate and lanthanum aluminate substrates, respectively, under the irradiation with XeCl lasers in the excimer laser-assisted metal organic deposition (ELAMOD) process have been previously reported. In order to investigate the growth phenomena, we monitored the thermal radiation from the sample surfaces irradiated with a pulsed ultraviolet laser in situ with near-infrared sensors. The cooling of the lanthanum strontium manganite films on strontium titanate substrates was significantly slower than that of films on lanthanum aluminate substrates. A similar behavior was also observed by the numerical simulation study. This difference in the cooling decay curves may play an important role in the mode by which crystal growth occurs in the ELAMOD process.     

What can we learn from hydrodynamic analysis at RHIC?

We can establish a new picture, the perfect fluid sQGP core and the dissipative hadronic corona, of the space-time evolution of produced matter in relativistic heavy-ion collisions at RHIC. It is also shown that the picture works well also in the forward rapidity region through an analysis based on a new class of the hydro-kinetic model and that this is a manifestation of the rapid increase of the entropy density in the vicinity of QCD critical temperature, namely, deconfinement.     

Determination of lead in seawater by flow-injection on-line preconcentration-electrothermal atomic absorption spectrometry after coprecipitation with iron(III) hydroxide.

A flow-injection on-line preconcentration-electrothermal atomic absorption spectrometric (ETAAS) method coupled with a coprecipitation method has been developed for the determination of lead in seawater. The combination of two preconcentration procedures, coprecipitation with iron(II) hydroxide and solid-phase extraction with a lead-selective resin, Pb-Spec, allowed the determination of lead at the ng kg(-1) level. Lead in 250 g of a sample solution was collected by coprecipitation with 10 mg of iron. The precipitate was dissolved in 25 ml of 1 mol l(-1) nitric acid; then, a 4-ml aliquot of the sample solution was introduced into the flow-injection system to preconcentrate and separate lead from iron on a Pb.Spec microcolumn. The sorbed lead was eluted with a 1.0 x 10(-4) mol l(-1) EDTA solution. The 30-microl portion of the eluate corresponding to the highest analyte concentration zone was injected into a graphite furnace. The overall enhancement factor was about 200 for 250 g of the sample. The average and standard deviation of ten blank values obtained were 1.7 ng and 0.38 ng, respectively. The recovery was 93.7 +/- 5.0% for seawater spiked with 20 ng kg(-1) lead. The proposed method is applicable to the analysis of seawater for lead at slightly higher levels.     

Nanoparticles in Emissions and Atmospheric Environment: Now and Future

Journal of Nanoparticle Research -     

Cytotoxicity of asymmetric platinum complexes against L-1210 cells. Effect of bulky substituents

The asymmetric platinum complexes cis-Pt(LL')Cl2 (L = NH3, L' = CH3NH2, (CH3)2NH, C2H5NH2 and (C2H5)2NH and LL' = N,N-dimethylethylenediamine),--one of the NH3 groups of cis-Pt(NH3)2Cl2 was substituted by alkylamine--, were synthesized and their cytotoxic effects have been measured using L-1210 cells. The IC50 values of the asymmetric platinum complexes,--being obtained after 24 h exposure of L-1210 cells to the platinum complexes--, are almost comparable to the corresponding value of cis-Pt(NH3)2Cl2. In 2 h exposure, however, the IC50 values of the platinum complexes were dramatically changed, i.e., a marked difference was observed between those of L' = RNH2 and L' = R2NH. On the other hand, the amounts of platinum taken into the L-1210 cells is little affected by the alkylamino substitution. The results suggest that the bifunctional platinum binding to the target molecule may be responsible for the cytotoxicity.     

Elementary reaction analysis of the radical polymerization of α‐ethyl β‐N‐(α′‐methylbenzyl)itaconamates carrying (RS)‐ and (S)‐α‐methylbenzylaminocarbonyl groups

The polymerizations of α‐ethyl β‐N‐(α′‐methylbenzyl)itaconamates carrying (RS)‐ and (S)‐α‐methylbenzylaminocarbonyl groups (RS‐EMBI and S‐EMBI) with dimethyl 2,2′‐azobisisobutyrate (MAIB) were studied in methanol (MeOH) and in benzene kinetically and with electron spin resonance (ESR) spectroscopy. The initial polymerization rate (R_p) at 60 °C was given by R_p = k[MAIB]^{0.58 ± 0.05}[RS‐EMBI]^{2.4 ± 0.l} and R_p = k[MAIB]^{0.61 ± 0.05}[S‐EMBI]^{2.3 ± 0.l} in MeOH and R_p = k[MAIB]^{0.54 ± 0.05}[RS‐EMBI]^{1.7 ± 0.l} in benzene. The rate constants of initiation (k_df), propagation (k_p), and termination (k_t) as elementary reactions were estimated by ESR, where k_d is the rate constant of MAIB decomposition and f is the initiator efficiency. The k_p values of RS‐EMBI (0.50–1.27 L/mol s) and S‐EMBI (0.42–1.32 L/mol s) in MeOH increased with increasing monomer concentrations, whereas the k_t values (0.20?7.78 × 10⁵ L/mol s for RS‐EMBI and 0.18?6.27 × 10⁵ L/mol s for S‐EMBI) decreased with increasing monomer concentrations. Such relations of R_p with k_p and k_t were responsible for the unusually high dependence of R_p on the monomer concentration. The activation energies of the elementary reactions were also determined from the values of k_df, k_p, and k_t at different temperatures. R_p and k_p of RS‐EMBI and S‐EMBI in benzene were considerably higher than those in MeOH. R_p of RS‐EMBI was somewhat higher than that of S‐EMBI in both MeOH and benzene. Such effects of the kinds of solvents and monomers on R_p were explicable in terms of the different monomer associations, as analyzed by ¹H NMR. The copolymerization of RS‐EMBI with styrene was examined at 60 °C in benzene. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1819–1830, 2003     

Development of micromarkers with various photoluminescence colors as tracers for shadowing pursuits.

Micromarkers with five photoluminescence colors were developed as tracers for shadowing pursuits. The markers are colorless powders with particle diameters of several tens to several hundreds of micrometers, prepared using a cryogenic sample crusher. They were visualized using red, green, yellow, magenta or cyan photoluminescence under ultraviolet light at approximately 365 nm. The markers were composed of photoluminescent compounds dispersed in polyvinyl butyral. The photoluminescent compounds in the polyvinyl butyral were stable under ambient conditions for more than one year after application. The compounds with the red, green, yellow, magenta and cyan photoluminescence contained a europium (Eu(3+)) complex, a terbium (Tb(3+)) complex, a mixture of Tb(3+) and Eu(3+) complexes, a mixture of Eu(3+) complex and o-coumaric acid, and a mixture of Tb(3+) complex and 7-hydroxycoumarin along with a few drops of a sodium bicarbonate aqueous solution, respectively. Neodymium (Nd(3+)) and ytterbium (Yb(3+)) complexes with photoluminescence in the near-IR wavelength region can also be added to these visible photoluminescent compounds as secret markers for discrimination. The markers were non-destructively identified using a microscopic FT-IR spectrometer and a microscopic spectrometer equipped with a fluorescence detector.