Development of a micromachined piezoelectric microphone for aeroacoustics applications

This paper describes the design, fabrication, and characterization of a bulk-micromachined piezoelectric microphone for aeroacoustic applications. Microphone design was accomplished through a combination of piezoelectric composite plate theory and lumped element modeling. The device consists of a 1.80-mm-diam, 3-microm-thick, silicon diaphragm with a 267-nm-thick ring of piezoelectric material placed near the boundary of the diaphragm to maximize sensitivity. The microphone was fabricated by combining a sol-gel lead zirconate-titanate deposition process on a silicon-on-insulator wafer with deep-reactive ion etching for the diaphragm release. Experimental characterization indicates a sensitivity of 1.66 microVPa, dynamic range greater than six orders of magnitude (35.7-169 dB, re 20 microPa), a capacitance of 10.8 nF, and a resonant frequency of 59.0 kHz.     

Dynamic anisotropy and heterogeneity of polystyrene thin films as studied by inelastic neutron scattering

We studied the dynamic anisotropy and heterogeniety of polystyrene thin films in glassy state with inelastic neutorn scattering. Adjusting the scattering vector to the directions parallel and perpendicular to the film surface, we observed the elastic scattering intensities as a function of temperature. It was found for the 200 A film that the elastic intesity decreased with increasing temperature more rapidly in the perpendicular direction than in the pararell direction, showing the higher mobility in the perpendicular direction. However, such dynamical anisotropy was not observed in the 1000 A film. The decrease in the mobility was observed with the film thickness in both the directions. These results were explained in terms of an interface hard layer. We also evelauated the dynamical heterogeniety from the non-Gaussian parameter A0, which increased with decreasing the film thickness, showing the increase in the dynamical heterogeneity. Assuming a simple bi-layer model consisting of the interface hard layer and the bulk-like layer, we analyzed the thickness dependence of the non-Gaussian parameter A0 and the mean square displacement (u2) to find that the hard layer has a thickness of approximately 130 A and a mean square displacement of approximately 0.018 A2 at 230 K.     

π-Sufficient heteroaromatic compounds fused naphthalimide unit as novel solvatochromic fluorophores

The carbazoles 1 and dibenzofurans 2 having naphthalimide unit were synthesized by the cross coupling reaction of 4-bromonaphthalimide 3 with aniline and phenol derivatives followed by the intramolecular cyclization, respectively. The chromophores 1c and 2c substituted methoxy group exhibited the strong fluorescence solvatochromism.     

Palladium-catalyzed denitrogenation reaction of 1,2,3-benzotriazin-4(3H)-ones incorporating isocyanides

1,2,3-Benzotriazin-4(3H)-ones and 1,2,3,4-benzothiatriazine 1,1(2H)-dioxide reacted with isocyanides in the presence of a palladium catalyst to give 3-(imino)isoindolin-1-ones and 3-(imino)thiaisoindoline 1,1-dioxides, respectively, in high yield. An intermediate azapalladacycle was generated through denitrogenation of the triazine moiety, and an isocyanide was incorporated therein.     

Rhodium-catalyzed asymmetric addition of potassium organotrifluoroborates to N-sulfonyl ketimines

A rhodium-catalyzed asymmetric addition of readily available potassium organotrifluoroborates to both N-tosyl and N-nosyl ketimines has been developed. High enantioselectivity has been achieved by using a chiral diene ligand, and the nosyl group of the addition products can be easily removed while retaining the enantiomeric purity.     

Preparative purification of gentamicin components using high-speed counter-current chromatography coupled with electrospray mass spectrometry

We developed a useful and preparative method based on high-speed counter-current chromatography with mass spectrometry (HSCCC/MS) to purify gentamicin C1a, C2/2a and C1 from standard powder. The analytes were purified on the HSCCC model CCC-1000 (multi-layer coil planet centrifuge) with a volatile two-phase solvent system composed of n-butanol/10% aqueous ammonia solution (50:50, v/v) and detected on an LCMS-2020EV quadrupole mass spectrometer fitted with an electrospray ionization (ESI) source system in positive ionization following scan mode (m/z 100-500). The HSCCC/ESI-MS peaks indicated that gentamicin C1a (m/z 450: [M+H](+)), C2/2a (m/z 464: [M+H](+)) and C1 (m/z 478: [M+H](+)) have the peak resolution values of 1.3 and 1.7 from 30 mg of loaded gentamicin powder. The HSCCC yielded 3.9 mg of gentamicin C1a, 12.6 mg of gentamicin C2/2a and 12.0 mg of gentamicin C1. These purified substances were analyzed by LC/MS with scan positive-mode. Based on the LC/MS chromatograms and spectra of the fractions, analytes were estimated to be over 95% pure. These gentamicin isomers of C1a, C2/2a and C1 were evaluated for their antibacterial activities. The overall results indicate that this approach of HSCCC/MS is a powerful technique for the purification of gentamicin components.     

Formation of a silicato complex of zinc in aqueous solution and its accelerating effect on the formation of silica scales in cooling water systems

This study elucidates the effect of zinc (Zn), which is an anticorrosive water additive, on the formation of silica scales from cooling water. In these experiments, the silica scales were analyzed by EPMA, and the results indicate that Zn is sorbed into the silica scales during formation. Measurements of the solubility of Zn(OH)(2) at various concentrations of silicic acid demonstrate that Zn is present as a silicato complex of Zn (SCZ) in cooling water. From adsorption experiments of the SCZ on silica and alumina, which are major components of the silica scales, it can be concluded that the SCZ accelerates the formation of silica scales from cooling water.     

A divergent synthesis of dihydropyridazinones,N‐substituted dihydropyrazoles,and O‐substituted pyrazoles

Dihydropyridazinones 4a , 4b , N‐substituted dihydropyrazoles 5b , 5c , 5d , and O‐substituted pyrazoles 6a , 6b , 6c , 6d have been synthesized starting from spirocyclopropanepyrazole derivative 2 . Treatment of 2 with α‐chloro esters, e.g., methyl chloroacetate, ethyl chloroacetate, isopropyl chloroacetate, and tert‐butyl chloroacetate, in potassium carbonate/sodium iodide system caused ring opening and subsequent C‐ or N‐attack nucleophilic substitution to give the corresponding dihydropyridazinones 4a , 4b and N‐substituted dihydropyrazoles 5b , 5c , 5d . On the other hand, in the absence of sodium iodide, O‐substituted pyrazoles 6a , 6b , 6c , 6d were obtained from 2 via an O‐attack nucleophilic substitution. J. Heterocyclic Chem., 2011.