Aggregation structure and mechanical properties of functionally graded polyurethane elastomers

Functionally graded polyurethane elastomers (FGPUEs) were prepared with two molds fixed at different temperatures (30 and 150 °C). The effects of the molar ratio of the curing agent (60/40, 75/25, or 97/3 1,4‐butane diol/1,1,1‐trimethylol propane) and the molecular weight of the polymer glycol (number‐average molecular weight = 2000 or 3000) on the molecular aggregation state and mechanical properties of the FGPUEs were investigated with differential scanning calorimetry, polarized optical microscopy, dynamic viscoelastic measurements, and tensile tests. The aggregation state of the FGPUEs was changed continuously from the one side (lower temperature side) to the other side (higher temperature side); for example, the glass‐transition temperature gradually increased in this direction. Also, the number of spherulites formed in the FGPUEs increased in the same manner. In the mechanical tests, the tensile strength and elongation at break of the lower temperature side were higher than those of the higher temperature side. This was correlated with the strong phase separation of the lower temperature side. The poly(oxytetramethylene glycol)‐based FGPUE with a chain extender of 75 wt % showed the largest degree of the temperature gradient. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2355–2363, 2003     

Control system of stockers in radioisotopes storage room using a personal computer

This paper describes a control system of stockers for radioactive source in storage room at laboratory for tracer experiment. The system is composed of a personal computer, a locker controller, three card readers, a monitor TV, and a video tape recorder (VTR). The personal computer controls other equipment with a registered user's number. When a user inserts an identification card into the card reader, the computer memorizes assigned gate number, the user's number and the time; it processes those data and prints out a document. The locker controller releases the electric key of user's locker which is designated by the computer. The VTR records the person entering into the storage room to identity if he uses his card. This system proved to effectively prevent intrusion into the storage room of an unregistered person or to use carelessly other user's source; in addition it can record precisely the stock of radioactive source.     

Adsorption and decomposition of NO on K-deposited Pd(1 1 1)

The adsorption and decomposition of NO on a K-deposited Pd(1 1 1) surface were investigated using X-ray photoelectron spectroscopy, infrared reflection absorption spectroscopy, and temperature-programmed desorption. For the K-deposited Pd(1 1 1) surface, two different NO adsorption sites were observed in addition to the Pd site. On the clean Pd(1 1 1) surface, the adsorption of NO was purely molecular and reversible, but on the K-deposited surface, the adsorbed NO decomposed at two different temperatures, 530 and 610 K. These results indicate that the NO adsorption and decomposition sites were newly created by the deposition of K onto the Pd(1 1 1) surface.     

Synthesis and morphology of polyethylene‐block‐poly(methyl methacrylate) through the combination of metallocene catalysis with living radical polymerization

Polyethylene‐block‐poly(methyl methacrylate) (PE‐b‐PMMA) was successfully synthesized through the combination of metallocene catalysis with living radical polymerization. Terminally hydroxylated polyethylene, prepared by ethylene/allyl alcohol copolymerization with a specific zirconium metallocene/methylaluminoxane/triethylaluminum catalyst system, was treated with 2‐bromoisobutyryl bromide to produce terminally esterified polyethylene (PE‐Br). With the resulting PE‐Br as an initiator for transition‐metal‐mediated living radical polymerization, methyl methacrylate polymerization was subsequently performed with CuBr or RuCl₂(PPh₃)₃ as a catalyst. Then, PE‐b‐PMMA block copolymers of different poly(methyl methacrylate) (PMMA) contents were prepared. Transmission electron microscopy of the obtained block copolymers revealed unique morphological features that depended on the content of the PMMA segment. The block copolymer possessing 75 wt % PMMA contained 50–100‐nm spherical polyethylene lamellae uniformly dispersed in the PMMA matrix. Moreover, the PE‐b‐PMMA block copolymers effectively compatibilized homopolyethylene and homo‐PMMA at a nanometer level. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3965–3973, 2003     

Novelty Filtering Using Phase Conjugate Wave in Organic Dye-Doped Polymer Films

A real-time detection of a moving object was demonstrated by taking the subtraction between cross-polarized phase conjugate waves with fast and slow response times with two kinds of dye-doped phase conjugators. One consists of superposed films of an erythrosin-B-doped film and a methyl-orange-doped film, and the other is a film dispersed with both dyes. The relative phase between cross-polarized phase conjugate waves by the both dye-dispersed films was stable.     

Computation of a two-dimensional stress intensity factor by the boundary element method

Summary This paper presents a boundary element formulation for elastostatic problems. The formulation is expressed in terms of the matrix notation, so that it is easily applicable to an available system of matrix structural analysis. A computer program developed is used to calculate the stress intensity factor K _I for some example problems in plane elasticity. Comparison is made between the boundary element calculations and other solutions, whereby the effectiveness of the boundary element method is demonstrated.

---

Berechnung eines zweidimensionalen Spannungsintensitätsfaktors mit der Methode der Bandelemente

Übersicht Dieser Aufsatz bietet eine Formulierung elastostatischer Probleme durch die Methode der Randelemente an. Die Formulierung benutzt eine Darstellung in Matrizenbezeichnung, so daß sie auf ein verfügbares System für Matrizenstrukturberechnung einfach anwendbar ist. Ein ausgebautes Computerprogramm wird auf die Berechnung des Spannungsintensitätsfaktors K _i für einige Beispiele in der ebenen Elastizität angewendet. Die mittels der Randelemente erhaltenen Ergebnisse werden mit anderen Lösungen verglichen. Dadurch zeigt sich die Wirksamkeit der Methode der Randelemente.

     

Rhodium-catalyzed asymmetric addition of potassium organotrifluoroborates to N-sulfonyl ketimines

A rhodium-catalyzed asymmetric addition of readily available potassium organotrifluoroborates to both N-tosyl and N-nosyl ketimines has been developed. High enantioselectivity has been achieved by using a chiral diene ligand, and the nosyl group of the addition products can be easily removed while retaining the enantiomeric purity.     

Preparative purification of gentamicin components using high-speed counter-current chromatography coupled with electrospray mass spectrometry

We developed a useful and preparative method based on high-speed counter-current chromatography with mass spectrometry (HSCCC/MS) to purify gentamicin C1a, C2/2a and C1 from standard powder. The analytes were purified on the HSCCC model CCC-1000 (multi-layer coil planet centrifuge) with a volatile two-phase solvent system composed of n-butanol/10% aqueous ammonia solution (50:50, v/v) and detected on an LCMS-2020EV quadrupole mass spectrometer fitted with an electrospray ionization (ESI) source system in positive ionization following scan mode (m/z 100-500). The HSCCC/ESI-MS peaks indicated that gentamicin C1a (m/z 450: [M+H](+)), C2/2a (m/z 464: [M+H](+)) and C1 (m/z 478: [M+H](+)) have the peak resolution values of 1.3 and 1.7 from 30 mg of loaded gentamicin powder. The HSCCC yielded 3.9 mg of gentamicin C1a, 12.6 mg of gentamicin C2/2a and 12.0 mg of gentamicin C1. These purified substances were analyzed by LC/MS with scan positive-mode. Based on the LC/MS chromatograms and spectra of the fractions, analytes were estimated to be over 95% pure. These gentamicin isomers of C1a, C2/2a and C1 were evaluated for their antibacterial activities. The overall results indicate that this approach of HSCCC/MS is a powerful technique for the purification of gentamicin components.     

Vesicle growth and deformation in a surfactant solution below the Krafft temperature

We have studied vesicle growth and deformation in aqueous solutions of nonionic surfactant C(16)E(7) below the Krafft temperature by means of an optical microscope. It has been found that vesicles become larger by fusing together, and that the growth rate is slower than that of the unilamellar vesicle or emulsion systems due to the multilamellar structures of shells in a vesicle. The deformation of the vesicles depends on the temperature quench depth, and we found the transformation from spherical vesicles to string-like domains at a certain quench-temperature. From the small angle X-ray scattering and confocal microscope experiments, it can be deduced that the deformation of vesicles would be induced by osmotic pressure due to the micellar concentration difference between inside and outside of vesicles.