Structure-driven design and synthesis of chiral dioxocyclam derivatives

Based on an analysis of previously reported structures and a potential geometry fit with substrates, a new family of chiral dioxocyclam derivatives have been designed. The synthesis of those ligands was accomplished starting from l-proline and α-d-amino acids (converted to β-amino acids) with a key step of macrocyclization reaction of amino esters. All ligands were converted into neutral copper(II) complexes (amide groups underwent deprotonation of upon treatment of ligands with copper(II) acetate). The complexes exhibit the desired shape of their active surfaces, as proved by X-ray analysis.     

Synthesis and Characterization of Dual Acidic Ionic Liquids

Novel ionic liquids with dual acidity, of which the cation contains Brφnsted acidity and anions contain Lewis acidity were synthesized. These ionic liquids obtained were identified by NMR, FF-IR, SDT and FAB-MS. Their acidities were determined by pyridine probe on IR spectrography.     

几种热塑性特种工程塑料的热分析研究

聚芳醚和聚芳硫醚两类聚合物都为热塑性的耐高温特种高分子材料 ,由于它们的加工性好、加工成型效率高 ,受到了世界各国的高度重视。这两类聚合物在结构上有许多相似之处 ,如它们的主链都含苯环、酮基或砜基 ,而聚芳醚类聚合物的柔性基团为醚键 ,聚芳硫醚类聚合物的柔性基团为硫醚键 ,但由于氧和硫在元素周期表中属于同一族元素 ,原子结构仍然相似 ,因而在某些方面具有一定的可比性。研究它们的性能差异对于改进聚合物性能以及进行进一步的结构设计将有一定的帮助。在这两类聚合物中 ,国内已商品化生产的品种有ＰＥＥＫ、ＰＥＳ和ＰＰＳ ,有…     

Adsorption of water vapour from humid air by selected carbon adsorbents

The water uptake by carbon molecular sieves (CMS) and graphitized carbons, all of which are used to determine volatile organic compounds in air, was investigated using a direct experimental approach. CMS, e.g. Carboxen 1002, Carboxen 1003 and Anasorb CMS adsorb substantial amounts of water, in the range 400 to 450 mg per gram of adsorbent. Graphitized carbons, e.g. Carbrogaph 5TD and Carbopack X show low water trapping, less than 30 mg g(-1) and Carbopack Y as little as 5 mg g(-1) or less. The water sorption capacity for graphitized carbons is strongly dependent on the relative humidity (RH). The change of RH from 95 to 90% decreases the amount of adsorbed water by more than a factor of 2. Two different water adsorption mechanisms are operative: adsorption on polar centers and micropore volume filling. For graphitized carbons and CMS at low RH, adsorption on polar centers is involved. For CMS, once the threshold value of relative humidity (RHth) is surpassed, micropore volume filling becomes predominant. RHth is 44 +/- 3 and 42 +/- 3% for Carboxen 1002 and 1003, respectively, and 32 +/- 3% for Anasorb CMS. The CMS mass in the trap was found not to affect the mass of retained water under condition of incomplete saturation of adsorbent bed with water. Thus, the restrictions commonly imposed on the CMS mass are not necessary. The dry purging technique is suggested to remove adsorbed water. Carbograph 5TD and Carbopack X require only a few hundred ml of dry air to remove adsorbed water entirely. Water can also be purged out from CMS; however, much larger volumes of dry air are needed.     

Simple Method for Simultaneous Determination of Selenium and Arsenic in Human Hair by Means of Atomic Fluorescence Spectrometry with Hydride Generation Technique

This study describes a simple, rapid and reliable method for simultaneous determination of selenium and arsenic in human hair by means of atomic fluorescence spectrometry combined with a hydride generation technique (HG-AFS). The procedure developed encompasses microwave digestion of a sample in the nitric acid environment only. The interferences caused by nitrous oxides are eliminated by removing a gas from above the digested solution with a stream of argon. The sample is then chemically treated in a flow-through hydride generation system and exposed to measurements in a double-channel atomic fluorescence spectrometer. The method permits determining both analytes in the linear range of 0.5–100µgL^–1 with a detection limit equal to 0.2µgL^–1, as well as with very good repeatability not exceeding 1% for Se and 2% for As. No mutual interferences from either of the analytes in the concentrations ranges matching the hair composition were found. The method was verified in terms of accuracy with the use of a reference material and then applied to the analysis of the natural samples of human hair.     

Some thermodynamic aspects of nitrides in materials science

The energies of combustion in fluorine of gallium nitride and indium nitride in wurzite crystalline structure have been measured in a two-compartment calorimetric bomb, and new standard molar enthalpies of formation have been calculated: Δ_fH_m⁰(GaN(cr) 298.15 K)= –(163.7±4.2) kJ mol^–1 and Δ_fH_m⁰(InN(cr) 298.15 K)= –(146.5±4.6) kJ mol^–1 . Comparison with the recommended values of the Δ_fH_m⁰ nitrides from the literature is also presented.     

TiO2-CdS-MCM-41复合纳米材料的合成和表征

利用γ-巯丙基三甲氧基硅烷及表面预吸附水解技术在MCM-41介孔分子筛孔道内部以化学键合的形式依次引入了CdS和TiO2纳米粒子.紫外-可见吸收光谱结果表明,借助于巯基的络合能力,MCM-41能有效地从反胶束中萃取CdS纳米粒子.利用小角XRD谱图成功地跟踪观察到了MCM-41介孔分子筛随纳米粒子的引入而产生的孔径变化.     

Biomimetic Asymmetric Reduction of Quinazolinones with Chiral and Regenerable NAD(P)H Models

A facile approach to chiral dihydroquinazolinone derivatives has been described via biomimetic asymmetric reduction of quinazolinones with chiral and regenerable NAD(P)H models. The utility of this method was demonstrated by a concise synthesis of the bromodomain protein divalent inhibitor.     

Quantum chemical studies of dioxygen activation by mononuclear non-heme iron enzymes with the 2-His-1-carboxylate facial triad

Density functional theory with the B3LYP hybrid functional has been used to study the mechanisms for dioxygen activation by four families of mononuclear non-heme iron enzymes: alpha-ketoacid-dependent dioxygenases, tetrahydrobiopterin-dependent hydroxylases, extradiol dioxygenases, and Rieske dioxygenases. These enzymes have a common active site with a ferrous ion coordinated to two histidines and one carboxylate group (aspartate or glutamate). In contrast to the heme case, this type of weak field environment always leads to a high-spin ground state. With the exception of the Rieske dioxygenases, which have an electron source outside the active site, the dioxygen activation process passes through the formation of a bridging-peroxide species, which then undergoes O-O bond cleavage finally leading to the four electron reduction of O(2). In the case of tetrahydrobiopterin- and alpha-ketoacid-dependent enzymes, the O-O heterolysis yields a high-valent iron-oxo species, which is capable of performing a two-electron oxidation chemistry on various organic substrates. For the other two families of enzymes (extradiol dioxygenases and Rieske dioxygenases) the substrate oxidation and the O-O bond cleavage are found to be coupled. In the extradiol dioxygenases the product of the O-O bond cleavage is a ferric iron with an oxy-substrate with a mixture of radical and anionic character, which is essential for the selectivity of the catechol cleavage.     

3－苯氧甲基－6－（2，4－二氟苯基）－7H-1,2,4-三唑并[3,4-b][1,3,4]噻二嗪的合成与晶体结构研究

由苯氧乙酸出发，经多步反应，制得3-苯氧甲基－4－氨基－5－巯基－1，2， 4－三唑，它与2-氯－2'，4'－二氟苯乙酮进行环化反应，生成3-苯氧甲基－6－（ 2,4-二氟苯基）－7H-1,2,4-三唑并[3,4-b][1,3,4]噻二嗪，通过元素分析、红外 光谱、核磁共振氢谱与碳谱、质谱进行表征，并利用单晶X射线衍射法测定其结构 。晶体属单斜晶系、P2_(1/c)空间群，a = 1.339(3) nm, b = 1.4683(4) nm, c = 0.8606(2) nm, β = 108.49(2)°, Z = 4, F(000) = 736, R_1 = 0.0509。还 对均三唑并噻二唑两类稠杂环的晶体结构作了比较。