Experimental confirmation by galvanomagnetic methods of a complex transport model in In0.53Ga0.47As layers deposited by MBE on SI-InP

At low temperatures In_0.53Ga_0.47As samples show an increase of carrier concentration, which can be explained in terms of a two carriers transport model. This type of problem exists since the beginning of the semiconductor era, dating back to monocrystalline germanium.We propose that in all the investigated layers, there are X atoms or charged dislocations in the region of the first monolayers, which are built in during epitaxial growth. The layers were intentionally undoped. They form an impurity band in which low mobility carriers dominate over the localised electron scattering due to the s-d exchange interaction. These carriers do not freeze out at liquid helium temperature and give rise to two transport media for electrons; a conduction band at higher temperatures and an impurity band at lower temperatures. The electron which fall down onto the previously ionised X atoms, then move by thermally activated hopping. We show that the two carriers model for In_0.53Ga_0.47As epitaxial layers are confirmed by the carrier concentration-temperature, carrier concentration-magnetic field, resistivity-magnetic field behaviour, and also by YKA theory also. The differences between the two transport models are so distinctive that observed phenomena may exist. This paper presents experimental results, which constitute comprehensive evidence for the complicated structure of the semiconductor epitaxial layers on the sample of n-type In_0.53Ga_0.47As/InP layer with n=2.2×10¹⁵/cm³.     

Theoretical study of the influence of laser-induced defects on the adsorption of gases on solid surfaces

Laser treatment of a solid surface was modeled by applying an analytical theory as well as by using Monte Carlo simulations. The crystalline surface was assumed to be initially smooth and chemically uniform, that is free of impurities built into the structure. Creation of surface defects by a laser beam was assumed to have entirely random nature. In particular, the surface was assumed to have been scanned by the beam focused successively on randomly chosen points. In the course of the ablation process, the beam produces a pyramidal crater whose dimensions are proportional to the applied laser power. According to the assumed nature of the scanning procedure, the craters formed by the beam are allowed to overlap. The influence of the number of laser pulses and the crater dimensions on the structural and adsorptive properties of the surface were examined by analysis of the variation of the mean surface depth and the surface width. Changes in the adsorptive properties were also estimated by the calculation of the thermally programmed desorption (TPD) spectra of monomolecular adsorbates desorbed from laser-treated surfaces. Additionally, equilibrium adsorption isotherms were calculated for the obtained surfaces.     

Reflective and photoacoustic infrared spectroscopic techniques in assessment of binding media in paintings

This study proposes a method to estimate the lipid content in binding media in paintings that can be used at any laboratory equipped with an infrared spectrometer. The lipid content estimator, termed greasiness index (GI), is defined as a ratio of lipid ν(C=O) and protein amide I bands at 1743 and 1635 cm⁻¹, respectively. Three Fourier transform infrared (FTIR) sampling techniques were evaluated for GI determination: reflective attenuated total reflection—ATR, specular reflection microscopy—μSR and photoacoustic—PAS. A set of model painting samples containing three tempera binding media (casein, egg, egg + oil), seven pigments and one varnish type were used in the study. Multivariate analysis was used to evaluate the resulting data. A good reproducibility of GI was obtained by ATR and PAS but not with μSR. The discriminative power of the technique is higher for unvarnished samples, but, generally, the GI estimator can be used for the categorisation of binding media in large populations of painting samples analysed with the same FTIR technique (sampling technique, detection, etc.).     

3D MR imaging of dental cavities-an in vitro study

A 3D spin-echo (3D SE) pulse sequence was used on a 4.7 T research MRI system to produce images of extracted human first molar tooth placed in CuSO4 water solution. The maximal resolution achieved was 35 x 63 x 300 microm3 in read and two phase directions, respectively. The high-intensity signal from water in solution together with the lack of signal from mineralized tooth tissue produce very good contrast allowing to visualize topography of outer and inner surfaces of the tooth. The 3D MR data were median filtered, binarized and then divided into separate segments corresponding to the inner tooth cavities and the hard tooth tissue. The topography of the root canals was visualized and the canals volume was calculated. The presented technique may be used for quantitative analysis of the root canal cavities shape and volume. The results of such an analysis may be applied for estimation of the quality of the impressional mapping methods in restorative dentistry or as an alternative non-impressional 3D mapping method.     

Fractional electrical model for modified bismuth oxide

Modified bismuth oxide (Bi₂O₃) is of great importance to fuel cells and oxide varistors. The electrical parameters of Bi₂O₃ vary with its modifying components as well as with its aging temperature. This paper presents an analysis of impedance test results carried out to find an equivalent electric model and the relationship between the model's elements to various additives used to modify Bi₂O₃ and to changes in aging temperature. The proposed model was tested via computer simulation and the model parameters correlated to individual modifiers.     

A Simple Synthesis of 2-Phenylethynyl- and 2-Phenylthioethynyl-2-substituted Phenylacetonitriles Under Phase-Transfer Catalytic (PTC) Conditions

The efficient synthesis of 2-phenylethynyl- or 2-phenylthioethynyl-2-substituted phenylacetonitriles 4 and 5 from nitriles 3 and substituted dichloroethenes 1 or 2, respectively, in the presence of 50% aqueous sodium hydroxide and tetrabutylammonium hydrogen sulphate (TBAHS) as a catalyst (phase-transfer catalysis, PTC), has been accomplished.     

Molecular organization in two-dimensional films of liquid crystalline mixtures III. Langmuir films of binary mixtures of liquid crystal materials with terminal CN o r NCS group

Langmuir films of binary mixtures of the following liquid crystal materials: 4-octyl-4′-cyanobiphenyl (8CB) or 4-pentyl-4″-cyano-p-terphenyl (5CT) with 4-(trans-4'-octylcyclohexyl)isothiocyanatobenzene (8CHBT), trans-4-octyl(4′-cyanophenyl)cyclohexane (8PCH) or 4-octyl4′-isothiocyanatobiphenyl (8BT) were investigated. Surface pressure-mean molecular area isotherms were recorded at various mixture compositions. It was found that only liquid crystal materials for which the molecules have a terminal -CN group are able to form a stable monolayer at the air-water interface. Moreover, information about the miscibility or the phase separation of the two components in the mixures was obtained by using the excess area criterion and surface phase rules.