Reductive cleavage of axially disymmetric tertiary amines and quaternary ammonium salts by lithium aluminium hydride. Synthesis of new 1,1′-binaphthyl substituted amines

Axially disymmetric tertiary amines or quaternary ammonium salts $\text{A}$ are synthesized by double alkylation of primary or secondary amines with racemic or optically pure 2,2′-bis (bromomethyl)-1,1′-binaphthyl. Their reductive cleavage by lithium aluminium hydride in refluxing THF leads to chiral secondary or tertiary amines $\text{B}$, substituted by a binaphthyl unit, with high yields and absence of racemization.     

Improved selectivity and detection limit of the carbonate-selective electrode

The properties of the carbonate neutral carrier 4-( n-hexadecyl)-3-nitro-1-trifluoroacetylbenzene were compared with those of a similar carrier, without a nitro group, studied previously. In spite of differences in the Hammett constant of the carbonyl group responsible for interaction with the analyte, the analytical characteristics of both carriers, measured under the same conditions, were comparable. Special care was taken to avoid the presence of an excessive carbon dioxide level in the diffusion layer at the membrane-solution interface. The internal reference solution was prepared without carbonate components; the external solution was protected from contact with atmospheric carbon dioxide. Under such conditions the detection limit of both electrodes was extended to 10(-11 )mol L(-1), and the selectivity towards salicylate, chloride, and acetate was significantly improved.     

Covalent crosslinking of 1-D photonic crystals of microporous Si by hydrosilylation and ring-opening metathesis polymerization

Free-standing porous Si multilayer dielectric mirrors, prepared by electrochemical etching of crystalline Si, are treated with a ruthenium ring-opening metathesis polymerization (ROMP) catalyst followed by norbornene to produce flexible, stable composite materials in which poly(norbornene) is covalently attached to the porous Si matrix.     

An overview of laboratory performance studies conducted by the IAEA for marine pollution studies of metals and organic contaminants

Aspects of the International Atomic Energy Agency (IAEA) Analytical Quality Control Services (AQCS) for marine environmental studies are discussed, focusing on recent laboratory performance studies (LPS) and the production of reference materials for trace metals and organic compounds in various marine matrices. The IAEA has organized seventeen global interlaboratory studies for a range of organic contaminants. Of note has been the inclusion of numerous polychlorinated biphenyl congeners (PCBs) and some sterols of anthropogenic origin. Concurrently, there have been eleven worldwide intercomparison exercises for trace metals in the marine environment, most of which included methylmercury. Although such interlaboratory studies can help improve performance in individual laboratories and regional laboratory networks, the results reveal that problems remain in the determination of some metals and many organic contaminants.     

CuSO<Subscript>4</Subscript> as a Mild,Green, and Efficient Catalyst for the One-pot Conversion of <Emphasis Type="Italic">THP</Emphasis> Ethers to Acetates

Summary. An efficient direct conversion of THP ethers into the corresponding acetates was achieved with acetic anhydride in the presence of CuSO₄ · 5H₂O as an available and green catalyst in high yields.     

Fenugreek mucilage as a flocculating agent for sewage treatment

The use of fenugreek mucilage, a natural polysaccharide and a direct food additive, as a flocculating agent for removal of suspended and dissolved solids from sewage effluent has been reported. A flocculation study has been done by the standard jar test method. The percent removal of suspended solid (SS) and dissolved solid (TDS) was determined by varying the polymer dose, pH and contact time. X-ray diffraction patterns of the solid waste material of mucilage and flocs (so obtained after treatment) were used to suggest the incorporation of the crystalline waste material in the mucilage. The optimal mucilage concentration was found to be 0.16 mg/l. The suitable pH range for maximum solid removal (SS and TDS) was alkaline and the time required for treatment was 1-3 h.     

Evaluation of measurement uncertainty for analytical procedures using a linear calibration function

In the EURACHEM/CITAC draft ”Quantifying uncertainty in analytical measurement” estimations of measurement uncertainty in analytical results for linear calibration are given. In this work these estimations are compared, i.e. the uncertainty deduced from repeated observations of the sample vs. the uncertainty deduced from the standard residual deviation of the regression. As a result of this study it is shown that an uncertainty estimation based on repeated observations can give more realistic values if the condition of variance homogeneity is not correctly fulfilled in the calibration range. The complete calculation of measurement uncertainty including assessment of trueness is represented by an example concerning the determination of zinc in sediment samples using ICP-atomic emission spectrometry. Received: 9 February 2002 Accepted: 17 April 2002     

Stationary phases with special structural properties for high-throughput separation techniques: preparation, characterization and applications

Stationary phases with specific structural properties for high-throughput liquid chromatographic (LC) techniques are described. Special attention was paid to phases with special structural properties, mainly containing internal functional group (e.g. amide). Such materials are generally called "embedded phases". There are phases created in amidation process of aminopropylated silica gel, especially phases based on biological compounds, like phospholipids and cholesterol, which are called immobilized artificial membranes (IAM's). The synthesis and applications of polar embedded amide LC stationary phases were also reviewed. Methods of characterization of synthesized packing materials were presented, with general focusing on spectroscopic measurements like (13C and 29Si CP/MAS NMR and FT-IR), elemental and thermal analysis as well as chromatographic quantitative structure-retention relationships (QSRR) and extended chemometric tests. The potential applications of various dedicated stationary phases in a high-throughput LC screening procedures were also presented.     

An expeditious,solvent-free synthesis of some 5-aryl-2-(2-hydroxyphenyl)-1,3,4-oxadiazoles

An efficient, rapid, microwave-accelerated one-step synthesis of some 5-aryl-2-(2-hydroxy-phenyl)-1,3,4-oxadiazoles by reaction of salicylic hydrazide with carboxylic acids in the presence of thionyl chloride under neat conditions is described. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 8, pp. 1264–1267, August, 2007.     

Grafted macroporous polymer monolithic disks: a new format of scavengers for solution-phase combinatorial chemistry

Polyethylene encased porous poly(chloromethylstyrene-co-divinylbenzene) disks have been prepared by polymerization in a cylindrical glass mold and cut to a disk format. Following attachment of a free radical azo initiator 4,4'-azobis(4-cyanovaleric acid) to available functionalities at the surface of the pores, the polymerization of 2-vinyl-4,4-dimethylazlactone was initiated from the surface. To avoid an undesirable increase in flow resistance and to improve the yield of grafting, divinylbenzene was added to the polymerization mixture in order to form a layer of swellable reactive polymer gel within the pores. The use of these disks as scavenging filters to remove various amines from solutions in flow-through operations was demonstrated by effective removal of amines in a very short period of time from their solutions in a variety of solvents, even including alcohols and water.