Hollow‐fiber liquid‐phase microextraction for the direct determination of flumequine in urban wastewaters by flow‐injection analysis with terbium‐sensitized chemiluminescence

A flow‐injection analysis chemiluminescence method based on the enhancement effect of the flumequine‐Tb(III) complex on the weak native emission of the Ce(IV)‐Na₂SO₃ system has been developed for the determination of flumequine. The method includes a cleanup and preconcentration stage (750‐fold) of the sample by hollow‐fiber liquid‐phase microextraction using an Accurel^® Q 3/2 polypropylene hollow fiber impregnated with 1‐octanol as the supported liquid membrane. The obtained 50 μL acceptor phase was injected in a 1 mM Tb(III) + 4 mM Ce(IV) in 5% v/v H₂SO₄ stream and mixed with a 2 mM Na₂SO₃ stream before its introduction into the flow cell. The chemiluminescence signal was linear in the 0.3–15 ng/mL range, with detection and quantitation limits of 0.1 and 0.3 ng/mL, respectively. The method allows the selective extraction and determination of flumequine in wastewater samples, using simpler and lower‐cost instrumentation and with shorter extraction and analysis times than traditional high‐performance liquid chromatography analysis.     

Cytotoxic compounds from the marine-derived fungus Aspergillus sp. recovered from the sediments of the Brazilian coast

A fungal strain of Aspergillus sp. (BRF 030) was isolated from the sediments collected in the northeast coast of Brazil, and the cytotoxic activity of its secondary metabolites was investigated against HCT-116 tumour cell line. The cytotoxicity-guided fractionation of the extracts from this fungus cultured in potato-dextrose-sea water for 14 days at room temperature yielded the hetero-spirocyclic γ-lactams pseurotin A (1), pseurotin D (2) and pseurotin FD-838 (7), the alkaloids fumitremorgin C (5), 12,13-dihydroxy fumitremorgin C (6), methylsulochrin (4) and bis(dethio)bis(methylthio)gliotoxin (3). Among them, fumitremorgin C (5) and 12,13-dihydroxy fumitremorgin C (6) were the most active. The cytotoxic activities of the extracts from Aspergillus sp. grown from 7 to 28 days were investigated, and they were associated with the kinetic production of the compounds. The most active extracts (14 and 21 days) were those with the highest relative concentrations of the compounds fumitremorgin C (5) and 12,13-dihydroxy fumitremorgin C (6).     

Synthesis and thermal behavior study of complexes of the type [Pd(μ-X)(4-eb-p-phen)]2 (X = Cl,Br, I,N3, NCO,SCN) and 4-eb-p-phen [bis(4-ethylbenzyl)p-phenylenediimine]

The Schiff base bis(4-ethylbenzyl) p-phenylenediimine, 4-eb-p-phen (1), and six new dimeric Pd(II) complexes of the type [Pd(μ-X)(4-eb-p-phen)]₂ {X = Cl (2), Br (3), I (4), N₃ (5), NCO (6), SCN (7)} have been synthesized and characterized by elemental analysis, IR spectroscopy, and ¹H and ¹³C{¹H}-NMR experiments. The thermal behavior of the complexes 2–7 has been investigated by means of thermogravimetry and differential thermal analysis. From the final decomposition temperatures, the thermal stability of the complexes can be ordered in the following sequence: 3 > 4 > 7 > 2 ≈ 5 > 6. The final products of the thermal decompositions were characterized as metallic palladium by X-ray powder diffraction (XRD).     

Dissolving-grade birch pulps produced under various prehydrolysis intensities: quality,structure and applications

Aqueous-phase prehydrolysis followed by alkaline pulping is a viable process to produce wood-based dissolving pulps. However, detailed characterisation of the achievable pulp quality, performance and cellulose structure is yet lacking. In this study, the production of hemicellulose-lean birch soda-anthraquinone pulps after prehydrolysis under various intensities was investigated. Increasing prehydrolysis intensity resulted in pulps of higher purity but lower cellulose yield and degree of polymerisation. Higher cellulose yield by using sodium borohydride during pulping was achieved at the expense of reducing pulp purity. Cellulose crystallinity was similar in all pulps indicating simultaneous degradation of both crystalline and amorphous cellulose regions. Reinforced prehydrolysis seemingly increased the cellulose crystal size and the interfibrillar distances. Moderate intensity prehydrolysis (170 °C) resulted in a pulp well suited for viscose application, whereas reinforced prehydrolysis favoured the production of acceptable cellulose triacetate dope. The performance of the pulps in viscose and acetate applications was strongly related to the chemical and structural properties.     

Chemoenzymatic preparation of optically active 4-aryl-5-carboxy-6-methyl-3,4-dihydro-2(1H)-pyridone derivatives

A series of racemic 4-aryl-5-(tert-butoxycarbonyl)-6-methyl-3,4-dihydro-2(1H)-pyridones have been prepared by means of a modified Hantzsch reaction using commercially available starting materials. An easy removal of the tert-butyl group of these pyridones and subsequent reaction with cesium carbonate and chloromethyl 2-methylpropanoate provided us suitable substrates (±)-5 to be used in lipase-catalyzed hydrolysis reactions. Lipase B from Candida antarctica (CAL-B) was the most adequate lipase in the hydrolysis of (±)-5. Despite the low enantioselectivity values obtained (E≤12), several optically active pyridone derivatives were finally isolated with high enantiomeric excesses (ee≥91%) and moderate yields.     

Doxorubicin Encapsulation Investigated by Capillary Electrophoresis with Laser-Induced Fluorescence Detection

Doxorubicin (DOX) belongs to the group of anthracycline antibiotics with very effective anticancer properties. On the other hand, the cardiotoxic effects limit its application over the maximum cumulative dose. To overcome this obstacle, encapsulation of this drug into the protective nanotransporter such as apoferritin is beneficial. In this study, fluorescent behavior of DOX in various solvents was determined by fluorescence spectrometry, demonstrating the fluorescence quenching effect of water, which is often used as a solvent. It was found that by increasing the amount of the organic phase in the DOX solvent the dynamic quenching is significantly suppressed. Ethanol, acetonitrile and dimethyl sulfoxide were tested and the best linearity of the calibration curve was obtained when above 50 % of the solvent was present in the binary mixture with water. Moreover, pH influence on the DOX fluorescence was also observed within the range of 4–10. Two times higher fluorescence intensity was observed at pH 4 compared to pH 10. Further, the DOX behavior in capillary electrophoresis (CE) was investigated. Electrophoretic mobilities (CE) in various pH of the background electrolyte were determined within the range from 16.3 to ?13.3 × 10 ^?9 m^?2 V^?1 s^?1. Finally, CE was also used to monitor the encapsulation of DOX into the cavity of apoferritin as well as the pH-triggered release.     

Complexes of DOTA-bisphosphonate conjugates: probes for determination of adsorption capacity and affinity constants of hydroxyapatite

The adsorption on hydroxyapatite of three conjugates of a bisphosphonate and a macrocycle having C1, C2, and C3 spacers and their terbium complexes was studied by the radiotracer method using 160Tb as the label. The radiotracer-containing complex of the conjugate with the C3 spacer was used as a probe for the determination of the adsorption parameters of other bisphosphonates that lack a DOTA unit. A physicochemical model describing the competitive adsorption was successfully applied in the fitting of the obtained data. The maximum adsorption capacity of bisphosphonates containing bulky substituents is determined mainly by their size. For bisphosphonates having no DOTA moiety, the maximum adsorption capacity is determined by the electrostatic repulsion between negatively charged bisphosphonate groups. Compounds with a hydroxy or amino group attached to the alpha-carbon atom show higher affinities. Macrocyclic compounds containing a short spacer between the different bisphosphonic acid groups and the macrocyclic unit exhibit high affinities, indicating a synergic effect of the bisphosphonic and the macrocyclic groups during adsorption. The competition method described uses a well-characterized complex and allows a simple evaluation of the adsorption behavior of bisphosphonates. The application of the macrocycle-bisphosphonate conjugates allows easy radiolabeling via complexation of a suitable metal isotope.     

Recent trends in the use of organized molecular systems combined with chromatographic techniques in environmental analysis

The establishment of new analytical methods which improve quality and sensitivity in the determination of environmental pollutants in liquid and solid samples is demanded. The use of micellar systems have become an advantageous tool for the extraction of pollutant compounds, due to their easy handling, biodegradability, and the one-step procedure, and they are compatible with the hydroalcoholic mobile phases used in HPLC. The focus of this review is to present recently developed methods and the main trends in the use of micellar media combined with solid-phase microextraction and solid-phase extraction in the chromatographic analysis of organic compounds in different types of environmental matrix, including water, sediments, and biological samples. Selected samples illustrate the benefits of these systems in the whole of analytical process. The advantages of micellar media over conventional extractants are reduction of solvent usage, low cost, easy handling, and non-toxic procedure.     

A photoelectron photoion coincidence study of the vinyl bromide and tribromoethane ion dissociation dynamics: heats of formation of C2H3+, C2H3Br, C2H3Br+, C2H3Br2+, and C2H3Br3

The threshold photoelectron photoion coincidence (TPEPICO) technique has been used to measure accurate dissociative photoionization onsets of vinyl bromide and 1,1,2-tribromoethane. The reactions investigated and their 0 K onsets are C2H3Br + hnu --> C2H3+ + Br (11.902 +/- 0.008 eV); C2H3Br3 + hnu --> C2H3Br2+ + Br (10.608 +/- 0.008 eV); and (C2H3Br3 + hnu --> C2H3Br+ + 2Br (12.301 +/- 0.035 eV). The vinyl ion heat of formation (Delta(f)H degrees 298K = 1116.1 +/- 3.0 kJ/mol) has been calculated using W1 theory and used as an anchor along with the measured dissociation energies to determine the heats of formation, Delta(f)H degrees 298K, in kJ/mol, of the following bromine-containing species: C2H3Br (74.1 +/- 3.1), C2H3Br+ (1021.9 +/- 3.1), C2H3Br2+ (967.1 +/- 4.0), and C2H3Br3 (53.5 +/- 4.3). These results represent accurate and consistent experimental determinations of heats of formation for these bromine-containing species, which serve to correct the discrepancies in the literature for C2H3Br and C2H3Br+ and provide the first experimental determination for the enthalpies of formation of C2H3Br2+ and C2H3Br3.     

Formation of polyelectrolyte multilayers on fibres: influence on wettability and fibre/fibre interaction

Polydimethyldiallylammonium chloride (PDADMAC) and polystyrene sulfonate (PSS) have been used to build-up polyelectrolyte multilayers (PEMs) on chemical soft wood fibres and on SiO2 at various electrolyte concentrations. Adsorption onto SiO2 was studied using a stagnation point adsorption reflectometer (SPAR), and the adsorbed amount of PDADMAC and PSS on the fibres was determined using nitrogen analysis and Sch?niger burning, respectively. The adsorption onto the two substrates was then compared. Paper testing showed that the tensile index (TI) increased by about 90% when 11 layers had been adsorbed, and that there was a correlation between the adsorbed amount and the increase in TI. It was also shown that the particular polymer present in the outermost layer significantly influenced the TI, and that PDADMAC produced a higher TI. A correlation between the adsorbed amount and the TI was also found. Individual fibres were partly treated with a PEM and analysed using a dynamic contact angle analyser (DCA) and environmental scanning electron microscopy (ESEM).