Flow-injection successive determination of cysteine and cystine in pharmaceutical preparations

A flow-injection configuration is proposed for the individual determination of cysteine and cystine and for the mixtures of both analytes. The procedure is based on the inhibitory effect of cysteine on the oxidation of thiamine to thiochrome by mercury(II). Linear calibration graphs were obtained between 1.0 x 10(-5) and 1.0 x 10(-4)M, with a sampling rate of 22 samples/hr and relative standard deviation of 1.14%. The inclusion of a selecting valve in the configuration, to pump water or hydroxylamine, allows the successive determination of these two analytes. The applicability of the method to the determination of cysteine and cystine in pharmaceutical preparations was demonstrated by investigating the effect of potential interferences and by the analysis of commercial preparations.     

Analytical procedures for quantification of peptides in pharmaceutical research by liquid chromatography–mass spectrometry

Peptide quantification by liquid chromatography–mass spectrometry (LC–MS) combines the high resolving power of reversed-phase (RP) chromatography with the excellent selectivity and sensitivity of mass spectrometric detection. On the basis of comprehensive practical experience in the analysis of small molecules, pharmaceutical research is developing technologies for analysis of a growing number of peptidic drug candidates. This article is a detailed review of procedures based on LC–MS techniques for quantitative determination of peptides. With the focus on pharmaceutical applications several technologies for sample preparation, various aspects of peptide chromatography, important characteristics of ESI–MS, selectivity of MS-detection modes, the large variability of internal standards, and modern instrumentation are discussed. The demand for reliable, robust, sensitive, and accurate methods is discussed using numerous examples from the literature, complemented by experiments and results from our laboratory.     

The separation of hypericin's enantiomers and their photophysics in chiral environments

We report the first separation of the enantiomers of hypericin. Their steady-state optical spectra and ultrafast primary photoprocesses are investigated in chiral environments. Within experimental error, there is no difference between the two enantiomers in any of the systems considered. This is consistent with the emerging picture that the rich and extended absorption spectrum of hypericin is not a result of ground-state heterogeneity. It is also consistent with the observation that the spectra and photophysics of hypericin are generally insensitive to environments in which it does not aggregate.     

Metal Oxoclusters as Molecular Building Blocks for the Development of Nanostructured Inorganic–Organic Hybrid Thin Films

Silica-based inorganic–organic hybrid thin films embedding the organically modified oxohafnium clusters (Hf₄O₂(OMc)₁₂, OMc=OC(O)–C(CH₃)=CH₂) were obtained by photo-activated free radical copolymerisation of the methacrylate groups of the cluster with those of the pre-hydrolysed (methacryloxypropyl)trimethoxysilane (MAPTMS, (CH₂=C(CH₃)C(O)O)(CH₂)₃Si(OCH₃)₃). By this route, a covalent anchoring of the cluster to the forming silica network was achieved. Samples characterized by two different Si/Hf compositions (18:1, 5:1) were prepared. The surface and in-depth composition of the thin films were investigated through Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS). XPS depth profiles performed on the thin layers evidenced a homogenous in depth distribution of the hafnium guest species within the whole silica films and sharp film-substrate interfaces. Broad band dielectric spectroscopy (BDS) measurements permitted to investigate the electric response of the obtained films in the frequency and temperature range of 40 Hz – 1 MHz and 0–160°C.     

Mechanistic study into the direct epoxidation of propene over gold/titania catalysts

The epoxidation of propene over gold/titania based catalysts was investigated using different techniques. Infrared spectroscopic information showed that one key step in the reaction mechanism is a reaction catalyzed by gold between titania surface groups and propene. In this reaction step, a bidentate propoxy species is formed on titania. This species adsorbs strongly on the catalyst, and it is the same species which is formed when propene oxide adsorbs on titania. Gravimetrical adsorption experiments and catalytic tests show that product adsorption and desorption are important factors determining the catalytic activity and the catalyst stability. By combining the information from different techniques, a kinetic mechanism is proposed.     

7-Benz[c] acridinemethanols as tetracyclic analogs of the 2-phenyl-4-quinolinemethanol antimalarials

A series of new 7-benz[c]acridinemethanols and 5,6-dihydro-7-benz[c]acridinemethanols was prepared as rigid, tetracyclic analogs of the antimalarial 2-phenyl-4-quinolinemethanols. Condensation of 5,7-dichloroisatin with 6-chloro-, 7-chloro-, and 6,7-dichloro-1-tetralone furnished halogenated 5,6-dihydro-7-benz[c]acridinecarboxylic acids, which were transformed into the corresponding acid chlorides, acyl malonates, α-bromomethyl ketones, and epoxides. Fully aromatic members of the series obtained via dehydrogenation of the 5,6-dihydro acids were likewise converted into epoxides via the acylmalonate route. Although all the epoxides studied proved to be exceptionally resistant to ring-opening by di-n-butylamine, probably on account of steric effects, they could be cleaved readily with piperidine or morpholine. Nmr spectra of the resulting amino alcohols suggest that these compounds exist in a single preferred conformation stabilized by internal O-H····N hydrogen bonding, and that free rotation about the side chain C-C bond does not occur at room temperature.     

Neutral pi-associated porphyrin [2]catenanes

A series of neutral porphyrin-containing catenanes has been synthesised, consisting of a zinc porphyrin strapped by a polyethylene glycol chain containing four or six ethylenoxy-units and incorporating a central naphthoquinol unit, interlinked with a naphthalene diimide macrocycle. The napthalene diimide precursor units exhibit only weak binding with the strapped porphyrins (Ka between 8 and 0.02 M(-1)), but good yields of the catenanes were obtained by Glaser coupling of the alkynyl napthalene diimide precursors in the presence of the porphyrins. Structures and solution conformations were determined by mass spectral and detailed 1H NMR studies. For the longer strapped porphyrins, the diimide macrocycle rotates around the central naphthoquinol unit at 420-450 times per second, while rotation is virtually prevented in the tighter strapped derivatives. A second dynamic process occurring in both sets of catenanes and described as 'yawing' leads to inequivalence in the naphthalene moieties. UV-Visible spectra indicate charge transfer interactions and electronic communication between the two components of the catenane.     

Conductivity Studies of Dilute Aqueous Solutions of Oxalic Acid and Neutral Oxalates of Sodium, Potassium, Cesium, and Ammonium from 5 to 35°C

Conductivity measurements of oxalic acid and neutral oxalates (disodium oxalate, dipotassium oxalate, dicesium, and diammonium oxalate) were performed on dilute aqueous solutions, c < 3 × 10^–3 mol-dm^–3, from 5 to 35°C. These data and those available from the literature were analyzed in terms of dissociation steps of oxalic acid, the Onsager conductivity equation for neutral oxalates, the Quint–Viallard conductivity equation for the acid, and the Debye–Hückel equation for activity coefficients, to give the limiting equivalent conductances of bioxalate anion ;(HC₂O₄ ^–) and oxalate anion (1/2C₂O₄ ^2–) and the corresponding dissociation constants K ₁ and K ₂.     

Substituent effects on monoboronic acid sensors for saccharides based on N-phenyl-1,8-naphthalenedicarboximides

In the course of our investigations on new monoboronic acid saccharide sensors with C(0) spacers, a series of probes 1-6 based on 1,8-naphthalenedicarboximide were synthesized. Sensor 1 displays features typical of PET monoboronic acid sensors and shows high selectivity to fructose. Sensor 2 exhibits a novel dual emission and remarkable sensitivity for glucose relative to fructose and galactose through subtle changes in pH. Sensor 3 displays significantly enhanced fluorescence in the presence of galactose at low pH. Although probes 4-6 exhibit unique properties such as high quantum yield (Phi(F) = 0.407) and excellent solubility in water, they did not show significant change in fluorescence intensity in the presence of monosaccharides. The effects of substituent on all six probes lend support to the proposed photoelectrochemical model.     

Benchmarking of ruthenium initiators for the ROMP of a norbornenedicarboxylic acid ester

The kinetic study of ring-opening metathesis polymerization (ROMP) of a diester functionalised norbornene derivative, (±)-exo,endo-bicyclo[2.2.1]hept-5-ene-2,3-dicarboxylic acid diethyl ester, with a series of ruthenium benzylidene complexes revealed the applicability of these initiators for well defined polymerization reactions. Values for the rate of initiation as well as the rate of propagation of the initiators were determined and correlated to the molecular weight and polydispersity of the isolated polymers. As the only initiator providing an entry to virtually monodisperse polymers the classical “first generation Grubbs-catalyst” was identified, while N-heterocyclic carbene based initiators polymerized with a rate of propagation much higher than the rate of initiation yielding polymers with a broader molecular weight distribution.