Microwave spectrum of monodeuterated diacetylene due to vibrationally induced dipole moment

Microwave spectrum of monodeuterated diacetylene (HCCCCD), which is nonpolar in the equilibrium configuration, was observed in various excited states of bending vibrations. Dipole moments in the ν₆, 2ν₆, and ν₆ + ν₉ vibrational states were determined from the Stark effect measurement to be 0.0907(6), 0.1681(14), and 0.0900(4) D with uncertainties in parentheses, where ν₆ and ν₉ denote respectively the CCH bending and lowest frequency bending vibrations. The l-type doubling constant in the ν₆ state is 2.1316(28) MHz. Rotational constants were determined in MHz; ν₆(Π), 4086.2165(44); 2ν₆(Δ), 4087.6963(58); ν₆ + ν₉(Δ), 4097.7537(50); 2ν₈(Δ), 4094.4786(103); ν₆ + ν₇(Δ), 4092.9074(176); ν₇ + ν₈(Δ), 4095.8925(354); 2ν₆ + ν₉(Φ), 4098.9505(339).     

Total synthesis of (+/-)-morphine

[Structure: see text] The morphinan skeleton was effectively synthesized by an intramolecular Mannich-type reaction. Further transformation led to total synthesis of morphine.     

Surface adsorption and vesicle formation of dilauroylphosphatidylcholine in room temperature ionic liquids

In this work, we study the adhesion forces between atomic force microscopy (AFM) tips and superficial dentin etched with phosphoric acid. Initially, we quantitatively analyze the effect of acid etching on the surface heterogeneity and the surface roughness, two parameters that play a key role in the adhesion phenomenon. From a statistical study of the force-distance curves, we determine the average adhesion forces on the processed substrates. Our results show that the average adhesion forces, measured in water, increase linearly with the acid exposure time. The highest values of such forces are ascribed to the high density of collagen fibers on the etched surfaces. The individual contribution of exposed collagen fibrils to the adhesion force is highlighted. We also discuss in this paper the influence of the environmental medium (water/air) in the adhesion measurements. We show that the weak forces involved require working in the aqueous medium.     

Electrothermal atomic absorption spectrometric determination of cadmium in environmental samples with niobium wire preconcentration method

A preconcentration method by adsorption of cadmium on a niobium wire was developed for the environmental waters, followed by electrothermal atomic absorption spectrometry with a tungsten tube atomizer. After the preconcentration, the niobium wire was directly inserted into the tungsten tube atomizer. In the preconcentration (adsorption) process of cadmium, the optimal immersing time was 60?s. The effects of large amounts of concomitants on the preconcentration of cadmium were evaluated. When 10³–10⁴ fold excess of matrix elements existed in aqueous solution at pH 4 and 9, the cadmium response was profoundly affected by the matrix elements. However, the cadmium absorption signal was not significantly influenced at pH 7. Therefore, pH 7 was selected for the application into the real environmental samples. Under the optimal conditions, the detection limit (3S/N) for cadmium by the niobium wire preconcentration method was 7.0?pg?mL^?1 and the relative standard deviation was 6.8%. The method with preconcentration on a niobium wire was applied to the determination of cadmium in water and proved to be sensitive, simple and convenient. Because this preconcentration method can be utilized in the in situ treatment of trace cadmium in environmental water samples, it was unnecessary to carry the water samples to the analytical work place. The technique was shown to be useful for the determination of cadmium in environmental water samples at 0.1–1?µg?L^?1 levels.     

Interpretation of the Role of Composition on the Inclusion Efficiency of Monovalent Cations into Cobalt Hexacyanoferrate

Cobalt hexacyanoferrate of various compositions was prepared in flow mode and the role of the vacancy on the structure, thermogravimetric (TG) properties, and the adsorption efficiency was studied. The material, Na_yCo[Fe(CN)₆]_1−x ⋅ z H₂O, with a minimum vacancy of x=0.014 to the highest x=0.47, was obtained. The TG-differential scanning calorimetry (DSC) profile showed a distinct influence of the vacancy on the water release temperature. Materials with x>0.35 showed a smooth release of water at a relatively lower temperature. However, for the materials with x<0.35, water release took place in multiple steps, suggesting the existence of various forms of water. The FTIR profiles supported the existence of free and bonded water molecules. However, the materials with multiple water peaks in the FTIR spectra showed a shift of the major XRD peaks when heated at 285 °C in N₂ atmosphere. Regarding the effect of the vacancy on the adsorption behavior, for NH₄, the adsorption was found to be proportional to the number of Na atoms in the material, confirming the ion-exchange process. On the contrary, the materials with low vacancy and high Na content showed nominal Cs adsorption capacity. Interestingly, the K adsorption capacity was found to be in between that of the other two ions. This means the ionic size decides the rate of placement into the interstitial sites. For larger ions like Cs, the ease of percolation via the vacancy decides the overall adsorption efficiency.     

Preparation of dibromopyridines having -(CH2)m-SO3Na groups as monomers for new polypyridines

Dibromopyridines or dibromopyridone with -(CH₂)_m-SO₃Na group(s) has been prepared via the reactions of the corresponding dibromopyridines with -OH and -NH₂ groups with sultone. These compounds were converted into polymers with the -(CH₂)_m-SO₃H groups via organometallic polycondensation. The polymer showed proton conducting properties and high stability toward oxidation.     

Deuterium isotope effects on hydrophobic interactions: the importance of dispersion interactions in the hydrophobic phase

Hydrogen/deuterium isotope effects on hydrophobic binding were examined by means of reversed-phase chromatographic separation of protiated and deuterated isotopologue pairs for a set of 10 nonpolar and low-polarity compounds with 10 stationary phases having alkyl and aryl groups bonded to the silica surface. It was found that protiated compounds bind to nonpolar moieties attached to silica more strongly than deuterated ones, demonstrating that the CH/CD bonds of the solutes are weakened or have less restricted motions when bound in the stationary phase compared with the aqueous solvent (mobile phase). The interactions responsible for binding have been further characterized by studies of the effects of changes in mobile phase composition, temperature dependence of binding, and QSRR (quantitative structure-chromatographic retention relationship) analysis, demonstrating the importance of enthalpic effects in binding and differentiation between the isotopologues. To explain our results showing the active role of the hydrophobic (stationary) phase we propose a plausible model that includes specific contributions from aromatic edge-to-face attractive interactions and attractive interactions of aliphatic groups with the pi clouds of aromatic groups present as the solute or in the stationary phase.     

Synthesis,structure, and dynamic behavior of cyclopentadienyl-lithium, -sodium,and -potassium annelated with bicyclo[2.2.2]octene units: a systematic study on site exchange of alkali metals on a cyclopentadienyl ring in tetrahydrofuran

Novel cyclopentadienyl (Cp)-alkali metal complexes 1-M and 2-M (M = Li, Na, K), in which the Cp ring is annelated with two bicyclo[2.2.2]octene units and substituted with a phenyl group for 1 and a tert-butyl group for 2, were synthesized, and their structures and dynamic behaviors were investigated by means of X-ray crystallography, dynamic (13)C NMR, and DFT calculations. The X-ray crystallography results indicated that 1-Li, 1-Na, and 2-Na form monomeric contact ion pairs (CIP) with three THF molecules coordinated to the metal atom. Also, in THF-d(8), all of the 1-M and 2-M form monomeric CIP in the ground state. However, variable-temperature (13)C NMR measurements of 1-M and 2-M in THF-d(8) demonstrated dynamic behavior in which the metal ion exchanges positions between the upper and lower faces of the Cp ring. From a study of the concentration dependence of the dynamic behavior, the exchange was found to proceed principally as an intramolecular process at concentration ranges lower than 0.2 M. The experimentally observed deltaG values for the intramolecular exchange process for all the 1-M and 2-M (except for 2-Li, whose intramolecular process was too slow to observe) were found to be quite similar in THF-d(8) solution and to fall within the range of 12-14 kcal mol(-)(1). Within this range, a tendency was observed for the deltaG values to increase as the size of the metal decreased. Theoretical calculations (B3LYP/6-31G(d)) afforded considerably large values as the gas-phase dissociation energy for 1-M (162.7 kcal mol(-)(1) for M = Li; 131.6 kcal mol(-)(1) for M = Na; 110.9 kcal mol(-)(1) for M = K) and for 2-M (170.0 kcal mol(-)(1) for M = Li; 137.5 kcal mol(-)(1) for M = Na; 115.4 kcal mol(-)(1) for M = K). These values should be compensated for by a decrease in the solvation energies for the metal ions with increasing size, as exemplified by the calculated solvation energy for M(+)(Me(2)O)(4), which serves as a model for metal ions solvated with four molecules of THF (-122.9 kcal mol(-)(1) for M = Li; -94.7 kcal mol(-)(1) for M = Na; -67.7 kcal mol(-)(1) for M = K). This compensation results in a small difference in the overall energy for dissociation of 1-M or 2-M in ethereal solutions, thus supporting the similar deltaG values observed for the intramolecular metal exchange.     

Synthesis of endogenous sperm-activating and attracting factor isolated from ascidian Ciona intestinalis

A chemoattractant candidate named sperm-activating and attracting factor (SAAF) from the eggs of ascidian Ciona intestinalis, was synthesized from chenodeoxycholic acid in 16 steps. The present synthesis led to the unambiguous structure determination of SAAF to be (3R,4R,7R,25S)-3,4,7,26-tetrahydroxycholestane-3,26-disulfate. The synthetic pure specimen was also used to confirm the dual sperm-activating and attracting activity.