Temperature stabilized optical waveguide modulator

A low drive-voltage optical modulator using a Ti-diffused UNbO₃ optical waveguide has been fabricated. Stabilization against ambient temperature change was realized by using a miniature halfwave plate. The halfwave voltage, 3 dB bandwidth, optical insertion loss and extinction ratio were 3·8 V (at 1·06m wavelength), 850 MHz, 10 dB and 13 dB, respectively. A reduction scheme for the optical absorption caused by metallic electrodes, and an analysis of the modulator high frequency response are also reported.     

Three bits eight states photochromic recording and nondestructive readout by using IR light

A photochromic polymer film containing three different diarylethene derivatives, that is, 1,2-bis(3,5-dimethyl-2-thienyl)perfluorocyclopentene (1), 1,2-bis(2,5-dimethyl-3-thienyl)perfluorocyclopentene (2), and 1,2-bis(2-methyl-5-phenyl-3-thienyl)perfluorocyclopentene (3) was prepared. Upon UV irradiation, the three derivatives changed to their closed-ring isomers having different colors, yellow, red, and blue. They showed different spectra not only in UV/Vis region but also in the IR spectral region. Upon irradiation with visible light of appropriate wavelengths, each closed-ring isomer was selectively bleached, and three bits eight states recording was performed. The eight states could be read out nondestructively by using IR light of appropriate wavenumbers.     

Deuterium isotope effects on hydrophobic interactions: the importance of dispersion interactions in the hydrophobic phase

Hydrogen/deuterium isotope effects on hydrophobic binding were examined by means of reversed-phase chromatographic separation of protiated and deuterated isotopologue pairs for a set of 10 nonpolar and low-polarity compounds with 10 stationary phases having alkyl and aryl groups bonded to the silica surface. It was found that protiated compounds bind to nonpolar moieties attached to silica more strongly than deuterated ones, demonstrating that the CH/CD bonds of the solutes are weakened or have less restricted motions when bound in the stationary phase compared with the aqueous solvent (mobile phase). The interactions responsible for binding have been further characterized by studies of the effects of changes in mobile phase composition, temperature dependence of binding, and QSRR (quantitative structure-chromatographic retention relationship) analysis, demonstrating the importance of enthalpic effects in binding and differentiation between the isotopologues. To explain our results showing the active role of the hydrophobic (stationary) phase we propose a plausible model that includes specific contributions from aromatic edge-to-face attractive interactions and attractive interactions of aliphatic groups with the pi clouds of aromatic groups present as the solute or in the stationary phase.     

Studies on taxol biosynthesis. Preparation of 5α-acetoxytaxa-4(20),11-dien-2α,10β-diol derivatives by deoxygenation of a taxadiene tetra-acetate obtained from Japanese yew

The putative metabolite, 5α-acetoxytaxa-4(20),11-dien-2α,10β-diol (7), which is a promising candidate as a biosynthetic pathway triol in taxol biosynthesis, has been prepared by Barton deoxygenation of the C-14-hydroxyl group of a differentially protected derivative of natural 2α,5α,10β-triacetoxy-14β-(2-methyl)-butyryloxytaxa-4(20),11-diene (8), a major taxoid metabolite isolated from Japanese Yew heart wood. The synthetic protocol devised, is amenable for the preparation of isotopically labeled congeners that will be useful to probe further intermediate steps in the biosynthesis of taxol.     

Phototoxic process after rapid photosensitive membrane damage of 5,5"-bis(aminomethyl)-2,2':5',2"-terthiophene dihydrochloride

We report a new aspect of rapid (<30 s) light-induced cell membrane damage photosensitized by 5,5"-bis(aminomethyl)-2,2':5',2"-terthiophene dihydrochloride (BAT), which is a water-soluble alpha-terthienyl analogue, using a high-power laser (light intensity 1.6 W cm(-2)). In this paper, we will discuss the relationship between the exposure time of the cells to the photosensitizer and the phototoxic process. Three toxic processes can be identified: first, a non-light-mediated toxicity dependent on BAT-cell incubation; second, a phototoxicity independent of BAT exposure time when the BAT concentration is in the 2-10-microM range; third, a phototoxicity dependent on BAT exposure time when BAT concentration becomes 20 microM. The cytotoxicity decreases when alpha-tocopherol, an antioxidant, is added to a cell membrane. This pattern of phototoxicity is the typical of a phospholipid peroxidation chain reaction and oxidative damage of membrane proteins triggered by a reactive oxygen species generated by a triplet state of BAT. The BAT exposure time is clearly correlated with the partition of the photosensitizer in the cell membrane and inside the cell.     

Synthetic studies on (+)-aplasmomycin. 1. Stereoselective synthesis of the C-12˜C-17 segment

The C-12˜C-17 segment of (+)-aplasmomycin ( ) was synthesized stereoselectively starting from (−)-malic acid based on the stereoselective ketone reduction.     

Reactions of 1,2-dimethoxytetramethyldisilane with styrenes: Formation of a new type of silacyclopentanes having phenyl substituents on ring carbons

The reaction of 1,2-dimethoxytetramethyldisilane with styrene and α-methylstyrene in the presence of NaOMe catalyst in tetrahydrofuran (THF) gave the new silacyclopentanes 1,1-dimethyl-2,4-diphenyl-1-silacyclopentane (IIIa) and 1,1,2,4-tetramethyl-2,4-diphenyl-1-silacyclopentane (IIIb), respectively. These silacyclopentanes were found to exist as cis-trans mixtures. The use of sodium metal in place of NaOMe afforded similar results. Reactions of a polysilane mixture, MeO-(SiMe₂)_nOMe (n ≧ 3), with the styrenes also gave similar results. In some cases, polysilacycloalkanes such as 1,2,3-trisilacyclopentanes (IV) and 1,2,3,4-tetrasilacyclohexanes (V) were obtained as by-products. A mechanism for the formation of the silacyclopentanes and polysilacycloalkanes is presented. It was found that electron impact decomposition of silacyclopentanes IIIa and IIIb, trisilacycloalkane IV and tetrasilacycloalkane V gave molecular ions corresponding to the silacyclopropane, cyclotrisilane and cyclotetrasilane systems.     

X-ray scattering by water molecules studied by using synchrotron radiation

The energy spectra of free water molecules were measured at scattering angles 2θ ranging from 10.5° to 75.7°, using an angle-dispersive-type diffractometer and synchrotron radiation as an X-ray source. A silicon (111) monochrometer was used to obtain incident X-rays with the wavelengths of (1.543/n) Å (n = 1,3,4,5). Observed inelastic scattering peaks are clearly separated from eleastic ones at s values [s = (4π/λ) sin Å] larger than 8 Å^?1. The increase of the separation with an increasing s value was consistent with the classical theory of the Compton shift. The total (elastic plus inelastic) intensities were obtained over a range of s = 0.74–5.0 Å^?1. Experimental difference intensities Δσ_ee and Δσ_ne were obtained separately by combining the X-ray and high-energy electron scattering data. The experimental results are in reasonable agreement with the theoretical intensities calculated from SCF and CI molecular wave functions with a basis set of double-zeta plus polarization functions. © 1994 John Wiley & Sons, Inc.     

Mechanisms of water oxidation catalyzed by the cis,cis-[(bpy)2Ru(OH2)]2O4+ ion

The cis,cis-[(bpy)(2)Ru(III)(OH(2))](2)O(4+) micro-oxo dimeric coordination complex is an efficient catalyst for water oxidation by strong oxidants that proceeds via intermediary formation of cis,cis-[(bpy)(2)Ru(V)(O)](2)O(4+) (hereafter, [5,5]). Repetitive mass spectrometric measurement of the isotopic distribution of O(2) formed in reactions catalyzed by (18)O-labeled catalyst established the existence of two reaction pathways characterized by products containing either one atom each from a ruthenyl O and solvent H(2)O or both O atoms from solvent molecules. The apparent activation parameters for micro-oxo ion-catalyzed water oxidation by Ce(4+) and for [5,5] decay were nearly identical, with DeltaH(++) = 7.6 (+/-1.2) kcal/mol, DeltaS() = -43 (+/-4) cal/deg mol (23 degrees C) and DeltaH(++) = 7.9 (+/-1.1) kcal/mol, DeltaS(++) = -44 (+/-4) cal/deg mol, respectively, in 0.5 M CF(3)SO(3)H. An apparent solvent deuterium kinetic isotope effect (KIE) of 1.7 was measured for O(2) evolution at 23 degrees C; the corresponding KIE for [5,5] decay was 1.6. The (32)O(2)/(34)O(2) isotope distribution was also insensitive to solvent deuteration. On the basis of these results and previously established chemical properties of this class of compounds, mechanisms are proposed that feature as critical reaction steps H(2)O addition to the complex to form covalent hydrates. For the first pathway, the elements of H(2)O are added as OH and H to the adjacent terminal ruthenyl O atoms, and for the second pathway, OH is added to a bipyridine ring and H is added to one of the ruthenyl O atoms.     

Monolithic silica columns with various skeleton sizes and through-pore sizes for capillary liquid chromatography

Reduction of through-pore size and skeleton size of a monolithic silica column was attempted to provide high separation efficiency in a short time. Monolithic silica columns were prepared to have various sizes of skeletons (approximately 1-2 microm) and through-pores (approximately 2-8 microm) in a fused-silica capillary (50-200 microm I.D.). The columns were evaluated in HPLC after derivatization to C18 phase. It was possible to prepare monolithic silica structures in capillaries of up to 200 microm I.D. from a mixture of tetramethoxysilane and methyltrimethoxysilane. As expected, a monolithic silica column with smaller domain size showed higher column efficiency and higher pressure drop. High external porosity (> 80%) and large through-pores resulted in high permeability (K = 8 x 10(-14) -1.3 x 10(-12) m2) that was 2-30 times higher than that of a column packed with 5-mirom silica particles. The monolithic silica columns prepared in capillaries produced a plate height of about 8-12 microm with an 80% aqueous acetonitrile mobile phase at a linear velocity of 1 mm/s. Separation impedance, E, was found to be as low as 100 under optimum conditions, a value about an order of magnitude lower than reported for conventional columns packed with 5-microm particles. Although a column with smaller domain size generally resulted in higher separation impedance and the lower total performance, the monolithic silica columns showed performance beyond the limit of conventional particle-packed columns under pressure-driven conditions.