Rates of base-catalysed cleavage of pyridyl-, quinolyl-, picolyl- and (quinolylmethyl)-trimethylsilanes

Rates of cleavage of some picoyl- and (quinolylmethyl)-trimethylsilanes (RSiMe₃, where R = PyCH₂ or QnCH₂SiMe₃) have been measured in “90%” aqueous methanolic sodium methoxide at 50°C. Relative reactivities are: 2-PyCH₂, 1.0; 3-PyCH₂, 0.030; 4-PyCH₂, 8.9; 2-QnCH₂, 41; 3-QnCH₂, 0.161; 4-QnCH₂, 37. The rates correlate well with those for base-catalysed hydrogen-exchange in the parent carbon acids RH. Approximate pK_a's (based on the scale of ion-pair acidities in CsNHC₆H₁₁H₂NC₆H₁₁, with pK_a of 9-phenylfluorene = 18.6) for the carbon acids, RH, can be derived as follows: 2-PyCH₃, 29.5; 3-PyCH₃, 34; 4-PyCH₃, 27; 2-QnCH₃, 25; 3-QnCH₃, 32; 4-QnCH₃, 25.Rates of cleavage of pyridyl- and quinolyl-trimethylsilanes (PySiMe₃ and QnSiMe₃) by sodium hydroxide in 4 : 1 v/v Me₂SO/H₂O at 50°C have also been measured; and the relative reactivities are: 2-Py, 1.0; 3-Py, 2.9; 4-Py, 8.4; 2-Qn, 15.9; 3-Qn, 12.7; 4-Qn, 184. The sequence of reactivity differes from that for base-catalysed hydrogen-exchange at the relevant positions of pyridine and quinoline, indicating that the reactivities are not determined in both cases (if in either) solely by the stabilities of the corresponding carbanions.     

Delocalization resonance energy of the allylic radical from the geometrical isomerization of hexa-1,3,5-trienes

Thermal cis, trans geometrical isomerization theoretically involves a 90° twisted, singlet diradical-like transition state which may serve as a base for the examination of structural perturbations. Although thermal rearrangement of hexa-1, trans-3,5-triene (and all-trans octa-2,4,6-triene) to the cis isomer cannot be followed directly owing to subsequent cyclization and 1,5 hydrogen shifts, activation parameters for disappearance have been determined. Experimental complications and mechanistic uncertainties which make interpretation difficult are removed in the bicyclic hexatriene, cyclopentenylidenecyclopentene. These geometrical isomers undergo uncomplicated thermal cis, trans isomerization in vessels of lead-potash glass: log k₁ = 12·03±0·32?41·7±0·8/(0·004575T_abs). Extraction of a value for allylic delocalization energy from the behavior of hexa-1, trans-3,5-triene [log k₁ = 12·91 ± 0·47?44·3±1·2/(0·004575 T_abs)] requires corrections of the Dewar-Schmeising type for changes in hybridization of the σ bonds. Depending on whether ethylene or trans-butene is taken as standard, values of 12·2 and 13·1 kcal/mol are obtained (estimated uncertainty ± 2 kcal/mol).     

Chemische Vitamin D<Subscript>3</Subscript>-Bestimmung in Lebertran

The different aspects of Vitamin D₃ determination and the data reported in the literature are discussed. The spectrophotometric determination of Vitamin D₃ in cod-liver oil is carried out after the alkaline saponification, extraction of unsaponified parts, precipitation of accompanying sterols and the column- and thin-layer chromatographic purification and separation of vitamin D₃ on 40 cm plates from other vitamins. The dyestuff α-naphtholbenzein is suited well as standard substance for the better location and identification of vitamin D₃ zone on the thin-layer plate. The results obtained from the chemical method were checked through the simultaneous biological determination.     

Über die Michael-Reaktion mit Chinolacetaten, 3. Mitt.

Zusammenfassung Versuche, von o-Benzochinolacetaten ausgehend die hydroaromatischen (primären) Additionsprodukte derMichael-Reaktion zu erhalten, hatten bisher nur bei Ia und Ib mit Malonsäuredinitril Erfolg. Mit p-Benzochinolacetat VI gelingt die Darstellung der primären Additionsprodukte auch mit anderen Reaktionskomponenten, wie z. B. Malonsäurediäthylester. *** DIRECT SUPPORT *** A3615076 00007     

Viscosity effects on the thermal decomposition of bis(perfluoro-2-N-propoxypropionyl) peroxide in dense carbon dioxide and fluorinated solvents

The thermal decomposition of the free-radical initiator bis(perfluoro-2-N-propoxyprionyl) peroxide (BPPP) was studied in dense carbon dioxide and a series of fluorinated solvents. For the fluorinated solvents, the observed first-order decomposition rate constants, k(obs), increased with decreasing solvent viscosity, suggesting a single-bond decomposition mechanism. The k(obs) values are comparatively larger in dense carbon dioxide and similar to the "zero-viscosity" rate constants extrapolated from the decomposition kinetics in the fluorinated solvents. The decomposition activation parameters demonstrate a compensation behavior of the activation enthalpy with the activation entropy upon change in solvent viscosity. Comparison of the change in activation parameter values upon change in solvent viscosity for BPPP with two additional initiators, acetyl peroxide (AP) and trifluoroacetyl peroxide (TFAP), further suggests that carbon dioxide exerts a very minimal influence on the decomposition mechanism of these initiators through solvent-cage effects.     

Schwingungs- und Elektronenspektren der bindungsisomeren Hexakis(thiocyanato-isothiocyanato)-ruthenate(III)

Vibrational and Electronic Spectra of Bond-Isomeric Hexakis(thiocyanato-isothiocyanato)ruthenates(III) Well resolved IR, Raman, and Electronic spectra of the bond isomeric complexes (TBA)₃[Ru(NCS)_n(SCN)_6?n], n = 1–5, including the pairs of geometric isomers n = 2, 3, 4, are recorded at low temperatures (10 and 80 K). Characteristic vibrations of the N- or S-coordinated ambident ligand SCN^? occur as listed: ν_CS(N): 810–850, ν_CS(S): 690–710, δ_NCS: 450–490, δ_SCN: 420–450, ν_RuN: 300–350, ν_RuS: 270–295 cm^?1. The assignment of the complexes is based on stepwise increasing intensities of the ν_CS(N) modes with increasing number of N-coordinated ligands. Characteristic shifts and splittings in the spectra allow to distinguish the geometric bond isomers according to their different symmetries. Even the absorption spectra in the visible range show within the series of bond isomers and for the cis/trans pairs systematic alternations.     

Some ideas on minimization in ultra micro elemental analysis

Summary The problems encountered in the development of ultra micro methods or trace methods of elemental analysis are generally discussed. It is shown that process analyses (e.g. titrations) are preferable to meet needs of accuracy and sensitivity. Moreover, continuous systems of chemical process analyses seem to give a solution to the generally stated problems.

---

Überlegungen zur Minimalisierung in der Ultramikroelementaranalyse

Zusammenfassung Die Probleme bei der Entwicklung von Ultramikro- oder Spurenmethoden in der Elementaranalyse werden allgemein diskutiert. Es wird gezeigt, daß Prozeßanalysen (z.B. Titrationen) den Anforderungen an Genauigkeit und Empfindlichkeit entsprechen. Darüber hinaus scheinen kontinuierliche Systeme chemischer Prozeßanalysen eine Lösung der aufgezeigten Probleme zu ermöglichen.

We thank the Czechoslovak Academy of Sciences, the Analytical Department of the Charles University of Prague and the High School for Chemical Technology of Pardubice for the possibility given to one of us (B.G.) to discuss with many colleagues in the SSR, the ideas presented in this article.     

The gas chromatography, thermal analysis and mass spectrometry of fluorinated lead β-diketonates Determination of traces of lead by the integrated ion-current technique

Preparative details for perfluoroalkanoylpivalylmethanes and their lead chelates are given. Thermal analysis, gas chromatography and mass spectral studies all indicate high thermal stability, but strong column interaction makes successful quantitative gas chromatography difficult. The integrated ion-current technique is applied to determine lead heptafluorobutanoylpivalylmethanate in the range 10^-9–10^-7 g of lead, but a lower detection limit of ca. 10^-14 g is indicated.