Chemoselectivity Control: Gold(I)‐Catalyzed Synthesis of 6,7‐Dihydrobenzofuran‐4(5H)‐ones and Benzofurans from 1‐(Alkynyl)‐7‐oxabicyclo[4.1.0]heptan‐2‐ones

New and chemoselective gold(I)‐catalyzed transformations of 1‐(arylethynyl)‐7‐oxabicyclo[4.1.0]‐ heptan‐2‐ones were developed. Two completely different products—6,7‐dihydrobenzofuran‐4(5H)‐ones and benzofurans—could be obtained from the same starting material. The selectivity is determined by the ligand of the gold catalyst: triphenylphosphine delivers 6,7‐dihydrobenzofuran‐4(5H)‐ones, and 1,3‐bis(diisopropylphenyl)imidazol‐2‐ylidene leads to benzofurans. Eleven examples of each case are provided. The mechanistic suggestions for the pathways to both product types are supported by isotope labeling experiments.     

The Ligand‐Based Quintuple Bond‐Shortening Concept and Some of Its Limitations

Herein, the ligand‐based concept of shortening quintuple bonds and some of its limitations are reported. In dichromium–diguanidinato complexes, the length of the quintuple bond can be influenced by the substituent at the central carbon atom of the used ligand. The guanidinato ligand with a 2,6‐dimethylpiperidine backbone was found to be the optimal ligand. The reduction of its chromium(II) chloride–ate complex gave a quintuply bonded bimetallic complex with a Cr? Cr distance of 1.7056 (12) Å. Its metal–metal distance, the shortest observed in any stable compound yet, is of essentially the same length as that of the longest alkane C? C bond (1.704 (4) Å). Both molecules, the alkane and the Cr complex, are of remarkable stability. Furthermore, an unsupported Cr^I dimer with an effective bond order (EBO) of 1.25 between the two metal atoms, indicated by CASSCF/CASPT2 calculations, was isolated as a by‐product. The formation of this by‐product indicates that with a certain bulk of the guanidinato ligand, other coordination isomers become relevant. Over‐reduction takes place, and a chromium–arene sandwich complex structurally related to the classic dibenzene chromium complex was observed, even when bulkier substituents are introduced at the central carbon atom of the used guanidinato ligand.     

Dual Gold Catalysis: σ,π‐Propyne Acetylide and Hydroxyl‐Bridged Digold Complexes as Easy‐To‐Prepare and Easy‐To‐Handle Precatalysts

A series of dinuclear gold σ,π‐propyne acetylide complexes were prepared and tested for their catalytic ability in dual gold catalysis that was based on the reaction of an electrophilic π‐complex of gold with a gold acetylide. The air‐stable and storable catalysts can be isolated as silver‐free catalysts in their activated form. These dual catalysts allow a fast initiation phase for the dual catalytic cycles without the need for additional additives for acetylide formation. Because propyne serves as a throw‐away ligand, no traces of the precatalyst are generated. Based on the fast initiation process, side products are minimized and reaction rates are higher for these catalysts. A series of test reactions were used to demonstrate the general applicability of these catalysts. Lower catalyst loadings, faster reaction rates, and better selectivity, combined with the practicability of these catalysts, make them ideal catalysts for dual gold catalysis.     

Error estimation approach for controlling the comunication step size for semi-implicit co-simulation methods

In this paper, an approach for controlling the macro-step size in connection with co-simulation methods [1, 2, 4] is suggested. The investigated step-size controller is tailored for semi-implicit co-simulation techniques. Concretely, we consider predictor/corrector co-simulation approaches [3]. By comparing variables from the predictor and the corrector step, an error estimator for the local error can be constructed. Making use of the estimated local error, a step-size controller for the macro step-size can be implemented. (© 2015 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Validation of a coupled FE-model for the simulation of methane oxidation via thermal imaging

To simulate the processes of methane oxidation in landfill cover layers, a new computational model was created. The purpose of the model is to allow a forecast on the performance of methanotrophic activity in landfill cover layers under changing environmental conditions. Therefore, a thermodynamic consistent model based on the well-known Theory of Porous Media (TPM) combined with the mixture theory was developed, which analyzes the relevant gas productions of methane, oxygen and carbon dioxide. Diffusion, advection and conversion processes are considered as well as the energy production during methane oxidation. With the help of the thermal imaging technique a new experimental setup was developed in order to validate the coupled model in terms of the heat generation. (© 2015 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Characterisation of filled rubber with a pronounced non-linear viscoelasticity

This contribution presents the characterisation of an incompressible carbon black-filled elastomer as one characteristical example for highly filled rubber. It shows a strongly pronounced non-linear viscoelastic behaviour and the most important characteristic is the extremely long relaxation time which has to be taken into account. The material model is developed with respect to uniaxial tension data. The basis in the development of a phenomenological model is given by the basic elasticity. For this evaluation the long term relaxation behaviour results in a complex experimental procedure. Therefore, special attention has to be paid according to an optimised experimental process in order to get the necessary reference data in an adequate and reproduceable way [1]. With this model basis further investigations are taken into account concerning the time-dependent viscoelasticity. Therefore, cyclic deformations from zero up to a maximum of deformation are considered for different strain rates. Furthermore, the relaxation behaviour is investigated for multiple strain levels. The phenomena which are observed in the experimental results yield in a purely viscoelastic model, based on a rheological analogous model consisting of an equilibrium spring and several Maxwell-elements which contain nonlinear relations for the relaxation times of the dashpot elements [1,2]. The material model's numerical realisation is accomplished in two ways. Because of its numerical simplicity especially according to the parameter identification the model is restricted only to the simple case of uniaxial tension. A second, alternative implementation is executed providing the benefit that more complex deformation conditions can also be taken into account. Therefore, the general, three-dimensional finite model is implemented in an open-source Finite Element library [3]. (© 2015 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

FE-simulation of spatially graded gelation during adhesive's curing

In this contribution main aspects of material characterization and modelling of a curing adhesive are denoted. It is pointed out how to deal with the exothermic heat generation during curing, both, how to obtain it experimentally as well as how to account for it in the continuum mechanical an FE-modelling framework. Furthermore, a strategy to simulate spatially graded gelation processes in ANSYS® is presented. An academic simulation example completes this work. By the help of this simulation tool a better understanding of a novel manufacturing process of smart semi-finished light weight structures is ensured. (© 2015 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Borane Adducts of Aromatic Phosphorus Heterocycles: Synthesis,Crystallographic Characterization and Reactivity of a Phosphinine-B(C6F5)3 Lewis Pair

A phosphinine-borane adduct of a Me₃Si-functionalized phosphinine and the Lewis acid B(C₆F₅)₃ has been synthesized and characterized crystallographically for the first time. The reaction strongly depends on the nature of the substituents in the α-position of the phosphorus heterocycle. In contrast, the reaction of B₂H₆ with various substituted phosphinines leads to an equilibrium between the starting materials and the phosphinine–borane adducts that is determined by the Lewis basicity of the phosphinine. The novel phosphinine borane adduct ( 6 -B(C₆F₅)₃) shows rapid and facile insertion and [4+2] cycloaddition reactivity towards phenylacetylene. A hitherto unknown dihydro-1-phosphabarrelene is formed with styrene. The reaction with an ester provides a new, facile and selective route to 1-R-phosphininium salts. These salts then undergo a [4+2] cycloaddition in the presence of Me₃Si−C≡CH and styrene to cleanly form unprecedented derivatives of 1-R-phosphabarrelenium salts.     

Light-Sensitive Phenacyl Crosslinked Dextran Hydrogels for Controlled Delivery**

Stimuli-responsive soft materials enable controlled release of loaded drug molecules and biomolecules. Controlled release of potent chemotherapeutic or immunotherapeutic agents is crucial to reduce unwanted side effects. In an effort to develop controlled release strategies that can be triggered by using Cerenkov luminescence, we have developed polymer hydrogels that can release bovine serum albumin and immunoglobulin G by using light (254 nm–375 nm) as a trigger. We describe the synthesis and photochemical characterization of two light sensitive phenacyl bis-azide crosslinkers that are used to prepare transparent self-supporting hydrogel patches. One crosslinker was designed to optimize the overlap with the Cerenkov luminescence emission window, bearing an π-extended phenacyl core, resulting in a high quantum yield (14 %) of photocleavage when irradiated with 375 nm light. We used the extended phenacyl crosslinker for the preparation of protein-loaded dextran hydrogel patches, which showed efficient and selective dosed release of bovine serum albumin or immunoglobulin G after irradiation with 375 nm light. Cerenkov-triggered release is as yet inconclusive due to unexpected side-reactivity. Based on the high quantum yield, efficient release and large overlap with the Cerenkov window, we envision application of these photosensitive soft materials in radiation targeted drug release.