Error estimation approach for controlling the comunication step size for semi-implicit co-simulation methods

In this paper, an approach for controlling the macro-step size in connection with co-simulation methods [1, 2, 4] is suggested. The investigated step-size controller is tailored for semi-implicit co-simulation techniques. Concretely, we consider predictor/corrector co-simulation approaches [3]. By comparing variables from the predictor and the corrector step, an error estimator for the local error can be constructed. Making use of the estimated local error, a step-size controller for the macro step-size can be implemented. (© 2015 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Validation of a coupled FE-model for the simulation of methane oxidation via thermal imaging

To simulate the processes of methane oxidation in landfill cover layers, a new computational model was created. The purpose of the model is to allow a forecast on the performance of methanotrophic activity in landfill cover layers under changing environmental conditions. Therefore, a thermodynamic consistent model based on the well-known Theory of Porous Media (TPM) combined with the mixture theory was developed, which analyzes the relevant gas productions of methane, oxygen and carbon dioxide. Diffusion, advection and conversion processes are considered as well as the energy production during methane oxidation. With the help of the thermal imaging technique a new experimental setup was developed in order to validate the coupled model in terms of the heat generation. (© 2015 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Characterisation of filled rubber with a pronounced non-linear viscoelasticity

This contribution presents the characterisation of an incompressible carbon black-filled elastomer as one characteristical example for highly filled rubber. It shows a strongly pronounced non-linear viscoelastic behaviour and the most important characteristic is the extremely long relaxation time which has to be taken into account. The material model is developed with respect to uniaxial tension data. The basis in the development of a phenomenological model is given by the basic elasticity. For this evaluation the long term relaxation behaviour results in a complex experimental procedure. Therefore, special attention has to be paid according to an optimised experimental process in order to get the necessary reference data in an adequate and reproduceable way [1]. With this model basis further investigations are taken into account concerning the time-dependent viscoelasticity. Therefore, cyclic deformations from zero up to a maximum of deformation are considered for different strain rates. Furthermore, the relaxation behaviour is investigated for multiple strain levels. The phenomena which are observed in the experimental results yield in a purely viscoelastic model, based on a rheological analogous model consisting of an equilibrium spring and several Maxwell-elements which contain nonlinear relations for the relaxation times of the dashpot elements [1,2]. The material model's numerical realisation is accomplished in two ways. Because of its numerical simplicity especially according to the parameter identification the model is restricted only to the simple case of uniaxial tension. A second, alternative implementation is executed providing the benefit that more complex deformation conditions can also be taken into account. Therefore, the general, three-dimensional finite model is implemented in an open-source Finite Element library [3]. (© 2015 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Borane Adducts of Aromatic Phosphorus Heterocycles: Synthesis,Crystallographic Characterization and Reactivity of a Phosphinine-B(C6F5)3 Lewis Pair

A phosphinine-borane adduct of a Me₃Si-functionalized phosphinine and the Lewis acid B(C₆F₅)₃ has been synthesized and characterized crystallographically for the first time. The reaction strongly depends on the nature of the substituents in the α-position of the phosphorus heterocycle. In contrast, the reaction of B₂H₆ with various substituted phosphinines leads to an equilibrium between the starting materials and the phosphinine–borane adducts that is determined by the Lewis basicity of the phosphinine. The novel phosphinine borane adduct ( 6 -B(C₆F₅)₃) shows rapid and facile insertion and [4+2] cycloaddition reactivity towards phenylacetylene. A hitherto unknown dihydro-1-phosphabarrelene is formed with styrene. The reaction with an ester provides a new, facile and selective route to 1-R-phosphininium salts. These salts then undergo a [4+2] cycloaddition in the presence of Me₃Si−C≡CH and styrene to cleanly form unprecedented derivatives of 1-R-phosphabarrelenium salts.     

Light-Sensitive Phenacyl Crosslinked Dextran Hydrogels for Controlled Delivery**

Stimuli-responsive soft materials enable controlled release of loaded drug molecules and biomolecules. Controlled release of potent chemotherapeutic or immunotherapeutic agents is crucial to reduce unwanted side effects. In an effort to develop controlled release strategies that can be triggered by using Cerenkov luminescence, we have developed polymer hydrogels that can release bovine serum albumin and immunoglobulin G by using light (254 nm–375 nm) as a trigger. We describe the synthesis and photochemical characterization of two light sensitive phenacyl bis-azide crosslinkers that are used to prepare transparent self-supporting hydrogel patches. One crosslinker was designed to optimize the overlap with the Cerenkov luminescence emission window, bearing an π-extended phenacyl core, resulting in a high quantum yield (14 %) of photocleavage when irradiated with 375 nm light. We used the extended phenacyl crosslinker for the preparation of protein-loaded dextran hydrogel patches, which showed efficient and selective dosed release of bovine serum albumin or immunoglobulin G after irradiation with 375 nm light. Cerenkov-triggered release is as yet inconclusive due to unexpected side-reactivity. Based on the high quantum yield, efficient release and large overlap with the Cerenkov window, we envision application of these photosensitive soft materials in radiation targeted drug release.     

Heavy Chains: Synthesis,Reactivity and Decomposition of Interpnictogen Chains with Terminal Diaryl Bismuth Fragments

In this work, we report the preparation of multiple interpnictogen chain compounds with three consecutive pnictogen atoms and terminal Ar₂Bi fragments (Ar=Ph, Mes). Symmetrical compounds of the form Ar₂Bi−E(tBu)−Bi₂Ar ( 1 : Ar=Ph, E=P; 2 : Ar=Ph, Mes, E=As) as well as ternary interpnictogen compounds of the form Ar₂Bi−E¹(tBu)−E²tBu₂ (Ar=Ph, Mes; 4 : E¹=P, E²=As; 5 : E¹=P, E²=Sb; 6 : E¹=As, E²=P) were prepared. The decomposition in solution at room temperature and under the influence of light was studied for compounds 1 – 6 . The reactivity of 1_Ph and 2_Ph with the small N-heterocyclic carbene 1,3,4,5-tetramethylimidazol-2-ylidene (Me₂IMe) was also studied. In the case of 1_Ph , the formation and consecutive decomposition of Me₂IMe=PtBu ( 8 ) was observed in solution. Hence, it was shown that 1_Ph can react as a “masked phosphinidene”. In the case of 2_Ph , no reaction with Me₂IMe was observed. All isolated compounds were analysed by NMR and IR spectroscopy, mass spectrometry, elemental analysis and single-crystal X-ray diffraction.     

[2+3] Amide Cages by Oxidation of [2+3] Imine Cages – Revisiting Molecular Hosts for Highly Efficient Nitrate Binding

The pollution of groundwater with nitrate is a serious issue because nitrate can cause several diseases such as methemoglobinemia or cancer. Therefore, selective removal of nitrate by efficient binding to supramolecular hosts is highly desired. Here we describe how to make [2+3] amide cages in very high to quantitative yields by applying an optimized Pinnick oxidation protocol for the conversion of corresponding imine cages. By NMR titration experiments of the eight different [2+3] amide cages with nitrate, chloride and hydrogen sulfate we identified one cage with an unprecedented high selectivity towards nitrate binding vs. chloride (S=705) or hydrogensulfate (S>13500) in CD₂Cl₂/CD₃CN (1 : 3). NMR experiments as well as single-crystal structure comparison of host-guest complexes give insight into structure-property-relationships.     

Clickable report tags for identification of modified peptides by mass spectrometry

The identification and quantification of modified peptides are critical for the functional characterization of post-translational protein modifications (PTMs) to elucidate their biological function. Nowadays, quantitative mass spectrometry coupled with various bioinformatic pipelines has been successfully used for the determination of a wide range of PTMs. However, direct characterization of low abundant protein PTMs in bottom-up proteomic workflow remains challenging. Here, we present the synthesis and evaluation of tandem mass spectrometry tags (TMT) which are introduced via click-chemistry into peptides bearing alkyne handles. The fragmentation properties of the two mass tags were validated and used for screening in a model system and analysis of AMPylated proteins. The presented tags provide a valuable tool for diagnostic peak generation to increase confidence in the identification of modified peptides and potentially for direct peptide-PTM quantification from various experimental conditions.     

Metal Assisted Synthesis of Cationic Sulfidobismuth Cubanes in Ionic Liquids

Bi₂S₃ was dissolved in the presence of either AuCl/PtCl₂ or AgCl in the ionic liquids [BMIm]Cl ⋅ xAlCl₃ (BMIm=1-n-butyl-3-methylimidazolium; x=4–4.3) through annealing the mixtures at 180 or 200 °C. Upon cooling to room temperature, orange, air-sensitive crystals of [BMIm](Bi₄S₄)[AlCl₄]₅ ( 1 ) or Ag(Bi₇S₈)[S(AlCl₃)₃]₂[AlCl₄]₂ ( 2 ) precipitated, respectively. 1 did not form in the absence of AuCl/PtCl₂, suggesting an essential role of the metal cations. X-ray diffraction on single-crystals of 1 revealed a monoclinic crystal structure that contains (Bi₄S₄)⁴⁺ heterocubanes and [AlCl₄]⁻ tetrahedra as well as [BMIm]⁺ cations. The intercalation of the ionic liquid was confirmed via solid state NMR spectroscopy, revealing unusual coupling behavior. The crystal structure of 2 consists of (Bi₇S₈)⁵⁺ spiro-dicubanes, [S(AlCl₃)₃]²⁻ tetrahedra triples, isolated [AlCl₄]⁻ tetrahedra, and heavily disordered silver(I) cations. No cation ordering took place in 2 upon slow cooling to 100 K.     

Arene Ruthenium(II) Complexes Bearing the κ-P or κ-P,κ-S Ph2P(CH2)3SPh Ligand

Neutral [Ru(η⁶-arene)Cl₂{Ph₂P(CH₂)₃SPh-κP}] (arene = benzene, indane, 1,2,3,4-tetrahydronaphthalene: 2a, 2c and 2d) and cationic [Ru(η⁶-arene)Cl(Ph₂P(CH₂)₃SPh-κP,κS)]X complexes (arene = mesitylene, 1,4-dihydronaphthalene; X = Cl: 3b, 3e; arene = benzene, mesitylene, indane, 1,2,3,4-tetrahydronaphthalene, and 1,4-dihydronaphthalene; X = PF₆: 4a–4e) complexes were prepared and characterized by elemental analysis, IR, ¹H, ¹³C and ³¹P NMR spectroscopy and also by single-crystal X-ray diffraction analyses. The stability of the complexes has been investigated in DMSO. Complexes have been assessed for their cytotoxic activity against 518A2, 8505C, A253, MCF-7 and SW480 cell lines. Generally, complexes exhibited activity in the lower micromolar range; moreover, they are found to be more active than cisplatin. For the most active ruthenium(II) complex, 4b, bearing mesitylene as ligand, the mechanism of action against 8505C cisplatin resistant cell line was determined. Complex 4b induced apoptosis accompanied by caspase activation.