Reversible Ultra-Slow Crystal Growth of Mixed Lead Bismuth Perovskite Nanocrystals: The Presence of Dynamic Capping

An ultra-slow crystal growth over a period of 24 h of a newly synthesized CH₃NH₃Pb_1/2Bi_1/3I₃ perovskite (MPBI) nanocrystal in non-polar toluene medium is reported here. From several spectroscopic techniques as well as from TEM analysis we found that the size of nanocrystals changes continuously with time, in spite of being capped by the ligands. Using a single molecular spectroscopic technique, we also found that this size change is not due to the stacking of nanocrystals but due to crystal growth. The notable temperature dependence and reversible nature of the nanocrystals growth is explained by the dynamic nature of the capping. The observed temperature-dependent ultra-slow growth is believed to be a pragmatic step towards controlling the size of perovskite NC in a systematic manner.     

A quick and regioselective access of spirooxindole-oxazoline by reaction of isatin and isocyanoacetate “on water”

A greener, rapid and regioselective “on water” synthesis of spirooxindole-oxazoline by the reaction of isatin and isocyanoacetate at room temperature is described. The developed protocol has the advantage of being atom-economical, eco-friendly, and benign reaction conditions. Broader substrate scope, experimentally simple procedures, and easy purification of products with high yield further make this method attractive. The synthesized compounds have been fully characterized with spectral analysis.     

Identification and Separation of Some Anions on Plain and Mixed Adsorbent Layers Using Water as Eluent

The analytical potential of water as an eluent in thin layer chromatographic separation of various anions on plain adsorbent layers (silica gel "G" alumina, and cellulose) as well as on beds containing different combinations of silica gel, alumina, or cellulose has been investigated. In addition to some important separation of anions, microgram separation of IO⁻₄ from milligram quantities of IO⁻₃, Bro⁻₃, MoO²⁻₄, and Fe (CN)³⁻₆ has been realized. The effect on pH of the sample in the separation of IO⁻₄ from accompanying ions has also been studied. The limits of detection and dilution limits of anions on alumina thin layers have been determined. NO⁻₂ in artificial seawater has been detected. The effect of CaCl₂, MgCl₂, and NaHCO₃ on some ternary separations of analytical importance has been examined.     

Volumetric studies and thermodynamics of viscous flow of hydroxamic acids in acetone + water solvent at temperatures 303.15 and 313.15 K

Densities ρ and viscosities η of two hydroxamic acids, N-phenyl-2-chlorobenzo- and N-o-tolyl-4-chlorobenzo-, have been determined as a function of their concentration in aqueous acetone solution at temperatures 303.15 and 313.15 K. Apparent molar volumes, standard-state partial molar volumes and relative viscosities have been calculated. The viscosity data have been analyzed using Jones-Dole equation. The activation thermodynamic parameters of viscous flow have been evaluated using Feakins equation. These were obtained to throw light on the mechanism of viscous flow. Thermodynamic interactions in solutions have been studied in terms of a number of excess functions calculated from the experimental data. The effect of hydroxamic acid concentration and temperature on these parameters has been discussed. The results were interpreted in the light of solute-solvent interactions in aquo-organic media.     

Preparation of electrodeless discharge lamps for emission studies of uranium isotopes at trace level

A simplified method for preparation of electrodeless discharge lamp for uranium isotopes with specific concerns for ²³²U is described. Micro-gram quantities of solid uranium oxides and aqueous solution of uranium nitrate have been used as a starting material for in situ synthesis of uranium tetraiodide. High temperature iodination reaction is carried out in the presence of inert gas neon. By careful design, the preparation time and surface area of quartz reaction tubes have been reduced considerably. The latter decreases the level of contamination which has a direct bearing on the operational lifetime of the lamps. Incorporation of steps to purify the product from an unwanted material improved the stability of the lamps. The procedure provides a safe and convenient way of handling ²³²U in particular but can be extended in general to any actinides having radioactivity similar to that of freshly separated ²³²U. Characteristic emission of uranium isotopes have been recorded by Fourier Transform Spectrometer to show the satisfactory operation of the lamps as well as their usage for studying emission spectra of the specific isotope.     

Various ways to strengthen the fiber‐matrix interface for enhanced composite performance

Surface treatment (ST) of carbon fibers (CF) leads to an enhancement in fiber‐matrix adhesion. However, it deteriorates the strength of a fiber which makes its reinforcing action less effective in a composite. These effects in opposite directions control the net strength of a composite, and hence, the treatment has to be judiciously applied, which would enhance the first factor and minimize the second one. Authors have recently reported on four effective techniques (using various doses) such as treatments with nanoparticles of Ytterbium fluoride (YbF₃)_, cold remote nitrogen–oxygen plasma (CRNOP), γ‐ray irradiation and nitric acid oxidation. Amongst these methods, nitric acid oxidation is studied in depth in the literature, and γ‐ray irradiation is sparingly studied. However, nano‐YbF₃ and CRNOP were first time reported in the literature by the authors. However, comparative aspects of all these methods were not addressed. In this paper, these aspects in details are discussed to lay down the right criteria for selection of a ST technique of CF to design the desired performance of a composite. The composites with polyetherimide and treated CF (including untreated) were developed and evaluated for various properties including tribological one. Treated CF based composites exhibited excellent mechanical and tribological properties (under harsh operative conditions with wear rates ≈ 1 × 10^?15 m³/Nm and μ ≈ 0.09). It was concluded that for strength and tribo‐performance, different treatments and doses are to be employed. Overall nanosized‐YbF₃ treatment of CF proved to be the most promising ST method. Copyright © 2013 John Wiley & Sons, Ltd.     

Efficiency of Superparamagnetic Nano Iron Oxide Loaded Poly(Acrylamide-co-Maleic acid) Hydrogel in Uptaking Cu2+ Ions from Water

A novel superparamagnetic iron oxide nanoparticles loaded poly(acrylamide-co-maleic acid) hydrogel (superparamagnetic PAM hydrogel) has been synthesized and cross-linked by methylene bisacrylamide for the investigation of its efficiency in uptaking copper ions from aqueous solution by batch method. The swelling behavior of the hydrogel was investigated. Metal ion uptake capacity of the adsorbent was evaluated in the light of varying pH, contact time, temperature, adsorbent dose, and different copper ion concentration. The synthesized superparamagnetic PAM was characterized by FTIR and XRD analysis. The structure and coating of the magnetic nanoparticles were characterized by XRD and FTIR analysis respectively. The adsorption data was fitted well in the Langmuir, Freundlich, and Temkin models and various static parameters were calculated. It is stated that this hydrogel could be regenerated efficiently (>97%) and used repeatedly.     

One-Pot Convenient and High Yielding Synthesis of Dithiocarbamates

Summary. A convenient and high yielding method for the synthesis of diverse dithiocarbamates having various substituents including alkyl, aryl, heteroaryl, and alkylaryl at the thiol chain or at the amine chain or at both thiol and amine chains were developed by the one-pot reaction of mercaptans, amines, and bis(benzotriazolyl)methanethione in presence of amidine base under mild reaction conditions.     

Thin and surface adhesive ferroelectric poly(vinylidene fluoride) films with β phase‐inducing amino modified porous silica nanofillers

We report an efficient route for ferroelectric polar β phase generation in poly(vinylidene fluoride) (PVDF) through incorporation of amine functionalized, porous silica (MCM‐41 and fumed silica) based nanofillers. These porous highly functionalized surfaces exhibit the efficient secondary interaction with polymer chain via hydrogen bonding. Structural analysis through FTIR, XRD, and TEM confirm high degree of ferroelectric polar β phase generation of PVDF through incorporation of amino modified porous silica nanofillers. Optimized loading (5 wt %) of amine functionalized, porous silica in PVDF matrix enhances relative intensity of β phase up to 75%. Disappearance of spherulite structure of PVDF with amino modified porous silica nanofillers, as confirmed through POM, TEM, SEM and AFM studies also supports the above conclusion. The P‐E hysteresis loop at sweep voltage of ±50 V of a thin PVDF‐amino modified porous nanofiller film shows excellent ferroelectric property with nearly saturated high remnant polarization 2.8 µC.cm^?2 owing to its large proportion of β PVDF, whereas, a nonpolar pure PVDF thin film shows unsaturated hysteresis loop with 0.6 µC.cm^?2 remnant polarization. PVDF films with the nanofillers exhibit strong adhesive strength over different metallic substrates making them have edge over PVDF in various thin film applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2401–2411