Porous NiO hollow quasi-nanospheres derived from a new metal-organic framework template as high-performance anode materials for lithium ion batteries

Porous hollow metal oxides derived from nanoscaled metal-organic framework (MOF) have drawn tremendous attention due to their high electrochemical performance in advanced Li-ion batteries (LIBs). In this work, porous NiO hollow quasi-nanospheres were fabricated by an ordinary refluxing reaction combination of a thermal decomposition of new nanostructured Ni-MOF, i.e., {Ni₃(HCOO)₆·DMF}_n. When evaluated as an anode material for lithium ion batteries, the MOF derived NiO electrode exhibits high capacity, good cycling stability and rate performance (760 mAh g^?1 at 200 mA g^?1 after 100 cycles, 392 mAh g^?1 at 3200 mA g^?1). This superior lithium storage performance is mainly attributed to the unique hollow and porous nanostructure of the as-synthesized NiO, which offer enough space to accommodate the dramstic volume change and alleviate the pulverization problem during the repeated lithiation/delithiation processes, and provide more electro-active sites for fast electrochemical reactions as well as promote lithium ions and electrons transfer at the electrolyte/electrode interface.     

InOOH压致氢键对称化及其弹性性质

利用第一性原理研究了InOOH在高压下的氢键对称化行为及其对InOOH弹性等性质的影响.结果表明约在18 GPa时InOOH中的氢键发生了对称化转变,导致轴比率b/c对压力的斜率由负值变为正值;压缩弹性常数、非对角弹性常数、体积模量和纵波波速出现异常增加,如体积模量增加了20%—40%.高压下InOOH弹性性质呈现出更加明显的各向异性.常压下InOOH呈现韧性,且伴随着氢键对称化韧性异常增加.对畸变金红石型MOOH(M=Al,In,Ga,Fe,Cr)化合物在高压下的弹性性质转变与氢键性质转变的耦合规律进行了初探.     

掺钕微球的受激辐射激光和自受激拉曼散射

采用溶胶-凝胶法在SiO_2微球表面覆盖上一薄层Nd~(3+)掺杂SiO_2,并经电极放电熔融后形成表面光滑的高Q值微球.采用锥光纤将808 nm的抽运激光耦合入钕离子掺杂的高Q值微球形成回廊模,激发产生了1080—1097 nm波段受激辐射激光.由于所产生的激光有足够高的功率密度,在高Q SiO_2微球中激发产生了波长为1120—1143 nm一级自受激拉曼散射激光.推导了锥光纤掺钕微球组合的自受激拉曼散射的输出功率和阈值公式.描述了输出激光的特性:阈值、输出功率、线宽、边模抑制比.     

Nanoscale gap filling for phase change material by pulsed deposition and inductively coupled plasma etching

The gap filling of phase change material has become a critical module in the fabrication process of phase change random access memory (PCRAM) as the device continues to scale down to 45 nm and below. However, conventional physical vapor deposition process cannot meet the nanoscale gap fill requirement anymore. In this study, we found that the pulsed deposition followed by inductively coupled plasma etching process showed distinctly better gap filling capability and scalability than single-step deposition process. The gap filling mechanism of the deposit–etch–deposit (DED) process was briefly discussed. The film redeposition during etching step was the key ingredient of gap filling improvement. We achieved void free gap filling of phase change material on the 30 nm via with aspect ratio of 1:1 by two-cycle DED process. The results provided a rather comprehensive insight into the mechanism of DED process and proposed a potential gap filling solution for 45 nm and below technology nodes for PCRAM.     

Yb离子抽运动力学及脉冲储能特性研究

从准三能级Yb离子的能级结构出发，建立了Yb离子的抽运和激光速率方程，结合解析和数值方法，研究了Yb激光介质的抽运动力学过程，包括抽运激发效率、最低抽运强度、激光能量提取效率等关键参数.比较了三类典型的Yb激光介质性能：Yb:S-FAP,Yb:YAG以及Yb:FP-glass.以放大自发辐射(ASE)为设计判据，重点研究了脉冲储能型Yb激光器的设计准则，包括增益介质的厚度与掺杂浓度.最后利用此模型给出了基于Yb:S-FAP以及Yb:YAG的100J级二极管抽运固体激光器(DPSSL)的总体设计参数.将对基于Yb激光介质的脉冲储能型DPSSL的设计提供有益的参考. 关键词： Yb离子 速率方程 抽运动力学 二极管抽运固体激光器     

Resonantly pumped Q-switched Er:GdVO4 laser

We describe a Q-switched Er:GdVO₄ laser resonantly pumped by a MgO-doped periodically poled LiNbO₃ optical parametric oscillator （MgO: PPLN OPO） at 1536 nm. In continuous-wave lasing, the maximum output power is 1.14 W with an incident pump power of 4.7 W and a slope efficiency of 27%. In Q-switched operation, 1.1 mJ of output pulse energy is achieved at 200 Hz. The upper-state lifetime at different pulse repetition frequencies is also calculated.     

Numerical analysis of Ytterbium-doped double-clad fiber lasers based on the temperature-dependent rate equation

The effects of temperature on the output power and optimal conditions of Ytterbium-doped double-cladding fiber lasers (YDDFLs) are discussed. Temperature-dependent rate equations for YDDFLs based on Boltzmann distribution are built in two-end pump model. The results show that the output power and the slope efficiency decrease with the increase of temperature. The increase of pump power results in that the effect of the temperature on the output performance increases, and the fiber length is a factor that the effect of the temperature depends on really. Moreover we combine the heat distribution formula with the rate equations and compare the numerical results considering with that not considering the temperature-dependence inside laser cavity, the effect of temperature can be ignored only when the pump power is lower, and the optimal fiber length becomes longer when considering the temperature-dependence.     

Trapping of electromagnetic wave in single-negative metamaterial waveguides

We study the trapping properties of transverse magnetic (TM) waves in single-negative metamaterial waveguides including epsilon-negative (ENG) metamaterial and mu-negative (MNG) metamaterial. The relationship between effective refractive index and reduced core width is analyzed when the permittivities of ENG and MNG metamaterials are different, and the inflection on this curve can be regarded as the trapping point. Simulation results show that the properties in an ENG–MNG–ENG metamaterial waveguide are contrary to that in a MNG–ENG–MNG metamaterial waveguide. The sensitivity of trapping point to the change of permittivity makes the single-negative metamaterial waveguides to be an effective method to detect the permittivity variation and can be used as a new kind of waveguide sensor.     

Focusing and diffraction by an optical lens and a small circular aperture

Based on the vectorial Rayleigh–Sommerfeld diffraction integrals, analytical expressions for the transversal and axial field distribution of plane waves propagating through a thin lens followed by a small circular aperture are derived and used to study the focusing and diffraction properties of plane waves. Some special cases of our general result are discussed, and illustrative numerical calculation results are given. It is found that the vectorial nonparaxial approach should be applied if the aperture dimension is comparable with the wavelength or the focusing is strong.     

PGA算法在条带式SAS场景目标成像中的应用

本文针对条带式合成孔径声呐(SAS)对场景目标成像应用中面临的方位向残余相位误差导致成像质量降低的问题,探讨了相位梯度自聚焦(PGA)算法在条带式SAS成像方位向相位误差估计和补偿中的应用方法,通过自适应的选点及窗宽估计处理以提高算法对场景目标的适应性,最后通过对场景目标成像的实际湖试数据进行处理和分析,结果验证了该算法改善条带式SAS对场景目标成像质量的有效性。