Synthesis of oxygen-deficient luminescent mesoporous silica nanoparticles for synchronous drug delivery and imaging

Oxygen-deficient luminescent mesoporous silica nanoparticles with uniform morphology/size and integrated mesoporosity-luminescent property in a single nanoparticle are successfully synthesized by a bottom-up self-assembly route followed by a post-calcination process, and can be used to facilely load/deliver drugs into cells and luminescently image cells.     

EDTA滴定法测定除尘灰中锌含量

采用灰化后再溶解试样的方法,成功解决了除尘灰因碳含量过高而难于溶解的问题;将灰化后的试样以HCl-HNO3-HF-HClO4混酸溶解,在氯酸钾存在下,以铁盐作载体,用氨水沉淀分离大部分铁、铝、铅等元素,以硫脲-氟化物、硫代硫酸钠、抗坏血酸作掩蔽剂,掩蔽剩余少量铜、锡、铁等干扰元素,在pH=5.5~6条件下,以二甲酚橙为指示剂,用EDTA标准溶液滴定得到锌的含量。方法的相对标准偏差在0.75%~2.8%,加标回收率在98.0%~102%。方法操作简便,且分析结果准确度、重现性较好,可以满足生产检验的需要。     

Preparation of phosphorylated chitosan‐coated carbon microspheres as flame retardant and its application in unsaturated polyester resin

In this work, phosphorylated chitosan‐coated carbon microspheres (PCH@CMS) was successfully synthesized. Obtained PCH@CMS used as flame retardant was added into unsaturated polyester resin (UPR). Fourier infrared spectroscopy (FTIR) and X‐ray electron spectroscopy (XPS) results indicated that C═O, P─O, and P═O appeared on the surface of PCH@CMS. Compared with UPR, the residues of UPR/PCH@CMS‐10 at 800°C under nitrogen and air atmospheres increased by 9.0 and 3.9 wt%, respectively, and the peak heat release rate (pHRR) and the peak smoke release rate (pSPR) of UPR/PCH@CMS‐3 decreased by 18.9% and 23.5%, respectively. Limiting oxygen index (LOI), thermogravimetric analyzer (TG), and cone calorimeter test (CCT) results showed that the addition of PCH@CMS could enhance the flame retardancy and smoke suppression of the UPR composites. Moreover, the residues after CCT were characterized by scanning electron microscopy (SEM), XPS, and laser Raman spectroscopy (LRS). Based on the above results, the flame retardant mechanism of PCH@CMS was proposed. The carbon layer produced by the UPR/PCH@CMS composites was tortuous and could suppress the heat and pyrolysis product exchange with UPR matrix.     

Pulse shaping by a discrete microstrip

Method for laser pulse shaping by a discrete transmission line has been improvedand simplified.Some calculations are given about deformation of the shaped pulse,passingthrough a laser amplifier.The required profile of electrical pulse can be deduced from the newcalculation when the amplified driving pulse profile is defined.The noise effect is estimated.     

衬底温度对非极性ZnO薄膜结晶性能和发光特性的影响

采用金属有机化学汽相沉积(MOCVD)设备在LiGaO2(100)衬底上制备了结晶性能良好的非极性ZnO薄膜.研究了衬底温度对ZnO薄膜结晶性能的影响.X射线衍射(XRD)分析结果表明在衬底温度为500℃时可以获得高质量的(1100)晶面取向的非极性ZnO薄膜.采用原子力显微镜(AFM)观察ZnO薄膜的表面形貌及晶体尺...     

一类具有标准发生率和双垂直传播的媒介传染病模型分析

建立了一类具有标准发生率和双垂直传播的媒介传染病模型,通过构造Lyapunov函数,利用LaSalle不变集原理等理论,证明了无病平衡点和地方病平衡点的存在性和稳定性,并对其进行数值模拟.得出通过采取降低人群与媒介之间接触率或者提高医疗水平等措施,能够控制疾病的蔓延.     

Photonic band gap in a one-dimensional periodic structure with semiconductor metamaterial in the near infrared

We construct a one-dimensional photonic crystal (1DPC) by use of semiconductor metamaterial in the near infrared which is composed of Al-doped ZnO (AZO) and ZnO and dielectric material. The expressions of transmittance and field distribution are deduced by transfer matrix method, and the dispersion curves of anisotropic permittivity of semiconductor metamaterial are analyzed at different ratio of AZO and ZnO. At last simulation results are given to analyze the influence of thickness of dielectric material and incident angle on the transmittance of the proposed PC.     

高压下NH_4ClO_4结构、电子及弹性性质的第一性原理研究

研究高压下NH_4ClO_4的结构和性质对于NH_4ClO_4在固体推进剂和炸药的安全应用具有重要意义.采用基于色散校正密度泛函理论的第一性原理方法,研究了0—15 GPa静水压力下NH_4ClO_4的晶体结构、分子结构、电子性质和弹性性质,计算结果与实验值具有较好的一致性.在压强为1,4和9 GPa时,NH_4ClO_4的晶体参数、键长和分子构型等均出现不连续变化,说明了在压强作用下结构发生变化.随着压强增加,氢键增多且作用增强,由分子内氢键向分子内和分子间的氢键转变;导带态密度峰值增加,电子局域性增强,晶体内N-H和Cl-O共价键作用增强,带隙增大,不同相变区域内带隙呈线性关系.0—15 GPa条件下NH_4ClO_4的弹性常数满足力学稳定性标准,采用Voigt-Reuss-Hill方法计算了体积模量B,剪切模量G和杨氏模量E,根据Cauchy压力和B/G值,说明NH_4ClO_4属于韧性材料,随着压强增加韧性增强.     

聚对苯二甲酸乙二酯的熔融双峰

未拉伸聚对苯二甲酸乙二酯(PET)、单轴拉伸PET、双轴拉伸PET在不同条件下热处理,并进行了DSC热分析、X-射线衍射分析、红外分析。结果表明:熔融双峰现象起因于DSC等速升温过程中PET的部分熔融和重结晶;低温峰是等温热处理过程中形成的不完善微晶的熔融峰,高温峰是重结晶后较完善的微晶的熔融峰;在等速升温过程中,PET晶胞参数不变、晶格完善、晶粒增大,并且规则折迭链增加,但晶粒随温度增大的过程中出现低谷。     

The fabrication of a nanoscale polyoxometalate based magnetic adsorbent and its selective adsorption on cationic dyes

Amino group-functionalized Fe₃O₄ is loaded on a coordination complex-modified polyoxometalate nanoparticle. In this composite material, Fe₃O₄ and coordination complex-modified polyoxometalate are connected with intense hydrogen bonds as suggested by FTIR. This composite material exhibits excellent methylene blue (MB) adsorption, with adsorption capacity of 175.5 mg g^?1. It also possesses selective separation ability between cationic and anionic dye molecules. In binary solution of MB and methyl orange (MO), MB adsorption efficiency reaches 75%, but it exhibits almost no effect on the adsorption of methyl orange. The saturation magnetization value of this composite material is 18.89 emu g^?1, allowing magnetic separation, which facilitates the recycle and reuse of this composite adsorbent.