Novel synthesis of o-naphthothiophenequinone derivatives via regioselective Diels-Alder reaction

A novel procedure to construct o-naphthothiophenequinones has been achieved from readily available o-benzothiophenquinones and N-dienes via Diels-Alder reaction-aromatization sequence as key steps. The absolute regioselectivity was established via Diels-Alder reaction of o-benzothiophenquinones with rich electron N-dienes.     

杯芳烃超分子对甲醇的识别机理分析及应用

采用四种杯芳烃超分子化合物为吸附涂层物质, 探讨了涂膜石英晶体微天平(QCM)传感方法对环境大气中微量甲醇气体的识别研究, 发现RCT(Resorcinol cyclic tetramer)是对甲醇气体识别最有效的活性涂层材料. 通过RCT-MeOH单晶体的制备并对其进行X-ray衍射结构解析, 发现其识别机制是基于甲醇分子中的甲基与杯芳烃化合物的苯环之间形成了C-H…π键作用. 当RCT涂层质量为28.16 μg时, 涂膜QCM传感器对甲醇的响应最灵敏, 达到0.01245 Hz/ppm. 该传感器对甲醇气体吸附和解吸附的初速度分别为－0.2110 Hz/s和0.09497 Hz/s. 该方法具有响应快、重现性和稳定性好的优点, 对甲醇测定的回收率在97.83%～103.66%之间, 与气相色谱法测定结果一致, 表明该方法可应用于环境大气中甲醇气体含量的检测.     

Molecularly imprinted polymer coated on stainless steel fiber for solid-phase microextraction of chloroacetanilide herbicides in soybean and corn

A molecularly imprinted polymer (MIP) with metolachlor as template was firstly coated on stainless steel fiber through chemical bonding strategy to solve the fragility problem of silica fiber substrate for solid-phase microextraction. The surface pretreatment of stainless steel fiber and the polymerization conditions were investigated systematically to enhance the preparation feasibility and MIP coating performance, and then a porous and highly cross-linked MIP coating with 14.8-μm thickness was obtained with over 200 times re-usability which was supported by non-fragile stainless steel fiber adoption. The MIP coating possessed specific selectivities to metolachlor, its metabolites and other chloroacetanilide herbicides with the factors of 1.1–4.6. Good extraction capacities of metolachlor, propisochlor and butachlor were found with MIP coating under quick adsorption and desorption kinetics, and the detection limits of 3.0, 9.6 and 38 μg L⁻¹ were achieved, respectively. Moreover, the MIP-coated stainless steel fiber was evaluated for trace metolachlor, propisochlor and butachlor extraction in the spiked soybean and corn samples, and the enrichment factors of 54–60, 27–31 and 15–20 were obtained, respectively.     

Synthesis of propylene carbonate from carbon dioxide using trans‐dichlorotetrapyridineru‐ thenium(II) as catalyst

trans‐Dichlorotetrapyridineruthenium(II) [trans‐RuCl₂(py)₄] was synthesized and the structure was determined by single crystal X‐ray crystallography. Highly efficient formation of propylene carbonate (PC) from carbon dioxide and propylene oxide was achieved by using a catalyst system composed of trans‐RuCl₂(py)₄ and hexadecyl trimethyl ammonium bromide under mild conditions (4h, 80 °C, 3.0 MPa). PC was obtained in nearly 100% selectivity without the formation of a polymer. The catalyst could be recycled constantly many times without any significant loss of its catalytic activity. On the basis of the results, a mechanism for the reaction was proposed. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

CdSe量子点/核壳结构的制备及在敏化太阳能电池中的应用进展

综述了CdSe量子点和核-壳型量子点的制备及其在敏化太阳能电池方面的应用进展.     

Reaction mechanism of methanol decomposition on Pt‐based model catalysts: A theoretical study

The decomposition mechanisms of methanol on five different Pt surfaces, the flat surface of Pt(111), Pt‐defect, Pt‐step, Pt(110)(1 × 1), and Pt(110)(2 × 1), have been studied with the DFT‐GGA method using the repeated slab model. The adsorption energies under the most stable configuration of the possible species and the activation energy barriers of the possible elementary reactions involved are obtained in this work. Through systematic calculations for the reaction mechanism of methanol decomposition on these surfaces, we found that such a reaction shows the same reaction mechanism on these Pt‐based model catalysts, that is, the final products are all H (H_ads) and CO (CO_ads) via O? H bond breaking in methanol and C? H bond scission in methoxy. These results are in general agreement with the previous experimental observations. © 2010 Wiley Periodicals, Inc. J Comput Chem, 2010.     

Redox‐induced configuration conversion for thioacetamide dimer can function as a molecular switch

The electronic switching properties of thioacetamide dimer (TAD) were investigated using the nonequilibrium Green's function method combined with density functional theory for design of a novel molecular switch. The H‐bonded TAD can be converted upon hole‐trapping to a three‐electron (3e)‐bonded configuration with a S∴S linkage which could provide a more favorable channel for charge transfer than the before. The redox‐induced configuration conversion between the H‐bonded and the 3e‐bonded TADs could govern the charge migration through the molecular junction with a considerable difference in conduction currents. The calculated I–V characteristic curves of two configurations exhibit a switching behavior with an On‐Off ratio in a range of about 4.3–7.6 within the applied voltages. Clearly, this hypothetical scheme provides a potential way to explore the novel conformation‐dependent molecular switch. © 2010 Wiley Periodicals, Inc. J Comput Chem 2010     

Absorption and fluorescence emission spectroscopic characters of naphtho‐homologated yy‐DNA bases and effect of methanol solution and base pairing

A comprehensive theoretical study of electronic transitions of naphtho‐homologated base analogs, namely, yy‐T , yy‐C , yy‐A , and yy‐G , was performed. The nature of the low‐lying excited states is discussed, and the results are compared with those from experiment and also with those of y‐bases. Geometrical characteristics of the lowest excited singlet ππ* and nπ* states were explored using the CIS method, and the effects of methanol solution and paring with their complementary natural bases on the relevant absorption and emission spectra of these modified bases were examined. The calculated excitation and emission energies agree well with the measured data, where experimental results are available. In methanol solution, the fluorescence from yy‐A and yy‐G would be expected to occur around 539 and 562 nm, respectively, suggesting that yy‐A is a green‐colored fluorophore, whereas yy‐G is a yellow‐colored fluorophore. The methanol solution was found to red‐shift both the absorption and emission maxima of yy‐A , yy‐T , and yy‐C , but blue‐shift those for yy‐G . Generally, though base pairing has no significant effects on the absorption and fluorescence maxima of yy‐A , yy‐C , and yy‐T , it blue‐shifts those for yy‐G . © 2009 Wiley Periodicals, Inc. J Comput Chem 2010     

Chiral magnetic metal-organic frameworks of Mn(II) with achiral tetrazolate-based ligands by spontaneous resolution

The enantiomers of complex 1 (1a and 1b) have been obtained by spontaneous resolution upon crystallization in the absence of a chiral source. The enantiomeric nature of 1a and 1b was confirmed by circular dichroism (CD) spectra and theoretical investigation.