Electron conductance and mode stability in multi-gap coupled cavity m

根据空间电荷波小信号基础理论,建立了多间隙耦合腔中单个间隙电子电导的计算模型与模式稳定性分析模型.以3间隙耦合腔为例,推导出了各个间隙电子电导的计算公式.通过理论计算与仿真模拟,研究了3间隙耦合腔中各个模式的电子电导特性,并进行了间隙中注波互作用研究与模式稳定性分析.模型计算发现:各个间隙不同模式的电子电导不同,第3间隙内电子电导受注电压及间隙距离影响最大,对整个间隙内的注波互作用及电路稳定性的影响也最大.该模型还可以用于分布作用速调管注波互作用的计算模拟.     

用于诊断纳秒脉冲电流的微分环现场标定技术

分析了用于纳秒脉冲电流测量的微分环标定难点,提出微分环现场标定方法。通过脉冲形成线脉冲充电以解决微分环标定中信噪比较低、可信度较差等问题;分析了脉冲形成线充电时间、充电电压及脉冲形成开关击穿电压等回路参数对标定结果的影响。基于闪光二号加速器,对测量二极管电流的微分环进行了现场标定,前级隔离开关平均击穿电压为25 kV时,微分环标定回路电流达到1.3 kA,微分环灵敏度为9.311010,方差为0.151010。     

基于LabVIEW的高功率微波驱动源监控系统

针对高功率微波源对前级驱动电源的计算机自动控制要求,设计了一套1 200 kV高功率微波驱动电源监控系统。系统采用多功能数据采集卡控制大功率调压器产生连续可调的工频电压,再经过环氧高压变压器和整流硅堆等转换为直流高压,对储能电容进行充电控制;采用高速数据输入输出卡控制触发系统按时序进行工作;监测计算机通过RS-485串口方式对直流高压、闸流管阳极电压、闸流管对地电流等进行实时状态监测;控制主机通过以太网与中央控制计算机实现通讯,可以单独控制电源工作,也可以通过中央计算机统一协调工作;采用LabVIEW作为软件开发平台,利用图形控件完成整个电源系统的控制监测等功能的设计;为了解决因电磁干扰强而引起的地电位抬高、高压采集不正常等问题,系统的软硬件都融入了可靠性设计。实验结果表明,该系统工作可靠稳定,实时性强,界面友好,操作简单,具有良好的可扩展性和移植性。     

Phase zone photon sieve

A novel diffractive optical element, named phase zone photon sieve (PZPS), is presented. There are three kinds of phase plates in PZPSs: PZPS1, PZPS2, and PZPS3. Each of the PZPSs has its own structure and is made on quartz substrate by etching. The three PZPSs have stronger diffraction peak intensity than a photon sieve (PS) when the margin pinhole and zone line width are kept the same. The PZPS3 can produce a smaller central diffractive spot than the ordinary PS with the same number of zones on the Fresnel zone plate. We have given the design method for and the simulation of PZPS and PS. PZPS has potential applications in optical maskless lithography.     

The comparison between the Mie theory and the Rayleigh approximation to calculate the EM scattering by partially charged sand

The Mie theory and Rayleigh approximation are two basic methods to study the EM scattering of uncharged spherical particle, and when the particle radius is much smaller than the incident wavelength, they are equivalent, but whether the Rayleigh approximation is still equivalent to Mie theory when we use them to calculate the EM scattering of small charged particle, there is still no any report published to discuss this problem. In this paper we make some comparisons between Mie theory and Rayleigh approximation to solve the EM scattering of partially electrification spherical particles. The results showed that the Mie theory would be more suitable to calculate the scattering of charged spherical particles.     

Micro‐Raman study of exfoliated Bi2Sr2CaCu2O8+δ single crystals with different thicknesses

Exfoliated Bi₂Sr₂CaCu₂O_8+δ (Bi‐2212) single crystals were prepared by micromechanical cleavage of bulk Bi‐2212 single crystals on SiO₂/Si substrates. Room temperature micro‐Raman spectra were collected using a 532‐nm laser source. The evolutions of the spectra of A_1g (Bi), A_1g (Sr), and A_1g (O_Bi) Raman modes with different thicknesses of the samples were studied. The refractive index of Bi‐2212 single crystal was obtained by studying the intensity evolutions based on the interference effect. The observed wavenumber shifts of the A_1g (Bi), A_1g (Sr), and A_1g (O_Bi) modes were analyzed. Copyright © 2011 John Wiley & Sons, Ltd.     

Numerical simulations of the impact of wavefront phase distortions of pump on the beam quality of OPA

<正>A numerical model of optical parametric amplification(OPA) is introduced to investigate the impact of wavefront phase distortion of pump on the beam quality of signal.Numerical results show that the unidentical walk-off directions of the pump and the idler waves are the main factors leading to the transfer of wavefront phase distortions of the pump to the signal,and by reducing the angle between the two directions,the beam quality factor(M~2) can be greatly decreased and hence the good beam quality of the signal can be maintained.     

Size controlled synthesis of semiconductor nanocrystals in a continuous-flow mode microcapillary reactor

A microcapillary reactor with 320 μm inner diameter was utilized for CdSe nanoparticle synthesis. The influence of the reaction temperature and flow rate of precursors on the size and size distribution of prepared CdSe nanoparticles was systematically studied. The as-prepared nanoparticles exhibit sharp excitonic absorption and photoluminescence peak (FWHM 30 nm) with a quantum-yield around 10–40%. The microcapillary reactor was also used for CdSe/ZnS core-shell nanoparticle synthesis in continuous-flow mode. The quantum yield of the core-shell nanoparticles was found to be considerably influenced by the reactor temperature and have a close correlation with the thickness of ZnS shell under growth. An optimized quantum yield up to 70% was obtained for the CdSe/ZnS core-shell nanoparticles.     

Three-dimensional contrast-enhanced ultrasound of the liver: Experience of 92 cases

Three-dimensional contrast-enhanced ultrasound (3D-CEUS) is a combination of three-dimensional ultrasound (3DUS) and contrast-enhanced ultrasound (CEUS). To evaluate the feasibility of 3D-CEUS in liver imaging, investigate possible influencing factors to its image quality, and evaluate the influence of 3D-CEUS to clinical outcome, low acoustic power (mechanical index, 0.08-0.13) 3D-CEUS was carried out in 102 focal liver lesions in 92 patients by using the LOGIQ 9 ultrasound scanner and a volume transducer (frequency range, 2-5 MHz; focusing ability, 2-25 cm in depth; azimuth aperture 5.9 cm). The lesions were classified into two groups: group 1 (n = 51) for characterization and group 2 (n = 51) for local treatment response evaluation. The factors that influenced the image quality of 3D-CEUS were analyzed. The image quality and usefulness of 3D-CEUS between the two groups were compared by using the χ²-test. The results showed that the lesion diameter, location, and scanning route had no significant influence on the image quality in both groups, whereas interfering factors damaged the image quality in group 1. In group 1, during arterial phase, high image quality was more frequently found in hyperenhanced and hypo- or non-enhanced lesions compared with isoenhanced lesions. In group 2, interfering factor and local treatment response had no obvious influence on the image quality. The visualization rate of high image quality was 94.1% (48/51) in group 2 vs. 72.6% (37/51) in group 1 (P = 0.012). The investigators found that 3D-CEUS improved confidence but made no change in diagnosis in 19 (37.3%) of 51 lesions in group 1, whereas 41 (80.4%) of 51 lesions in group 2 (P = 0.000). 3D-CEUS tends to obtain better image quality and lead to higher diagnostic confidence in the lesions for local treatment response evaluation, and perhaps is more useful in this aspect in future clinical settings.     

Influence of Zr and Ce doping on electromagnetic properties of (Gd,Y)–Ba–Cu–O superconducting tapes fabricated by metal organic chemical vapor deposition

(Gd,Y)Ba₂Cu₃O_x tapes have been fabricated by metal organic chemical vapor deposition (MOCVD) with Zr-doping levels of 0–15 mol.% and Ce doping levels of 0–10 mol.% in 0.4 μm thick films. The critical current density (J_c) of Zr-doped samples at 77 K, 1 T applied in the orientation of H 6 c is found to increase with Zr content and shows a maximum at 7.5% Zr doping. The 7.5% Zr-doped sample exhibits a critical current density (J_c) of 0.95 MA/cm² at H 6 c which is more than 70% higher than the J_c of the undoped sample. The peak in J_c at H 6 c is 83% of that at H 6 a–b in the 7.5% Zr-doped sample which is more than twice as that in the undoped sample. Superconducting transition temperature (T_c) values as high as about 89 K have been achieved in samples even with 15% Zr and 10% Ce. Ce-doped samples with and without Ba compensation are found to exhibit substantially different J_c values as well as angular dependence characteristics.