Microstructural and mechanical analysis of Cu and Au interconnect on various bond pads

Effects of High Temperature Storage (HTS) and bonding toward microstructure change of intermetallic compound (IMC) at the wire bonding interface of 3 types of bond pad (Al, AlSiCu and NiPdAu) were presented in this paper. Optical and electron microscope analyses revealed that the IMC growth rate of samples under 175 and 200 °C HTS increased in the order of Al > AlSiCu > NiPdAu. Besides, higher HTS and bonding temperatures also promoted higher IMC thickness. The compositional study showed that higher HTS and bonding temperature developed rapid interdiffusion in bonding interface. In the mechanical ball shear test, a decrease of the shear force of Al and AlSiCu bond pads after 500 h HTS was believed due to poorly developed IMC at bonding interface. On the other hand, shear force degradation at 1000 h was due to excessive growth of IMC that in turn causes the formation of defects. For NiPdAu bond pad, increasing trend of shear force with HTS duration at 175 °C implied a good reliability of the Cu wire bonding. The rapid microscopic inspection on Cu wired Al bond pad under HTS 175 °C showed the IMC development from the periphery to the center of the ball bond. However, after 500 h voids started to develop until the crack was observed at 1000 h.     

A tridentate CNO‐donor palladium(II) complex as efficient catalyst for direct C―H arylation: Application in preparation of imidazole‐based push–pull chromophores

A series of imidazolium chlorides for the formation of tridentate CNO‐donor palladium(II) complexes featuring N‐heterocyclic carbene moieties have been developed from cheap and readily available starting materials with high yields. Their palladium complexes were prepared by reactions between the ligand precursors and PdCl₂ using K₂CO₃ as base in pyridine with reasonable yields. These air‐stable metal complexes were characterized using ¹H NMR and ¹³C{¹H} NMR spectroscopy and elemental analyses. Heteronuclear multiple bond correlation experiments were performed to identify key NMR signals of these compounds. The structures of two of the complexes were also established by single‐crystal X‐ray diffraction analysis. One of these complexes was successfully applied in the direct C―H functionalization reactions between heterocyclic compounds and aryl bromides, producing excellent yields of coupled products. The coupling reactions were scalable, allowing grams of coupled products to be obtained with a mere 2 mol% of Pd loading. The catalyst system developed allowed the large‐scale preparation of several push–pull chromophores straightforwardly. Photophysical properties based on UV–visible and fluorescence spectroscopy for these chromophores were investigated. Deep blue photoluminescence with moderate quantum efficiency and twisted intramolecular charge transfer excited state were observed for these chromophores. Density functional theory (DFT) and time‐dependent DFT calculations were performed to support the experimental results.     

Comparison of standard addition and conventional isotope dilution mass spectrometry for the quantification of endogenous progesterone in milk

In this study, a standard addition–isotope dilution mass spectrometry (SA-IDMS) method for quantification of endogenous progesterone in milk has been described. The method validation results, linearity, limits of detection and quantification, recovery and uncertainty were fit for the purpose of assigning reference mass fractions to proficiency testing schemes. The developed technique was compared to the isotope dilution mass spectrometry (IDMS) method already existing in the laboratory. Analytical results of two milk samples were (1.377 ± 0.048) μg/kg and (4.457 ± 0.155) μg/kg by SA-ID-LC/MS method, while the results were (1.355 ± 0.019) μg/kg and (4.359 ± 0.059) μg/kg by ID-LC/MS, respectively. Since SA-IDMS was an effective quantitative method that overcame matrix effect, similar quantitative results from IDMS and SA-IDMS indicated that the quantification of progesterone in milk was barely influenced by matrix. Both IDMS and SA-IDMS could be used to assign reference mass fractions to progesterone in milk inter-laboratory proficiency testing schemes.     

An Investigation into the Migration of Segments in Crosslinked Fluorinated Polyimide Adhesive

Crosslinked fluorinated polyimides (CFPI) were successfully synthesized to study and explore the effect of cross-linkage on the migration of fluorinated segments and on the adhesion strength. Characterization by dynamic thermomechanical analysis (DMA) and thermo gravimetric analysis (TGA) confirmed good thermal properties of CFPI. X-ray photoelectron spectroscopy (XPS) results showed that the ratio of fluorinated component (6FDA-ODA) concentration of the surface to the bulk decreased with the crosslink density. The water contact angle of CFPI was lower than that of non-crosslinked fluorinated polyimide, indicating that the migration of fluorinated groups to the surface was reduced by the presence of cross-linkage. Therefore, CFPI, with no fluorine segregation on the surface, exhibited excellent wetting of adherent surfaces and adhesion strength, which was proved by lap shear strength (LSS) measurements and scanning electron microscopy.     

Regioselective Synthesis of Polycyclic and Heptagon-embedded Aromatic Compounds through a Versatile π-Extension of Aryl Halides

A versatile π-extension reaction was developed based on the three-component cross-coupling of aryl halides, 2-haloarylcarboxylic acids, and norbornadiene. The transformation is driven by the direction and subsequent decarboxylation of the carboxyl group, while norbornadiene serves as an ortho-C−H activator and ethylene synthon via a retro-Diels–Alder reaction. Comprehensive DFT calculations were performed to account for the catalytic intermediates.     

次线性期望下的一般中心极限定理

受Peng-中心极限定理的启发,本文主要应用G-正态分布的概念,放宽Peng-中心极限定理的条件,在次线性期望下得到形式更为一般的中心极限定理.首先,将均值条件E[X_n]=ε[X_n]=0放宽为|E[X_n]|+|ε[X_n]|=O(1/n);其次,应用随机变量截断的方法,放宽随机变量的2阶矩与2+δ阶矩条件;最后,将该定理的Peng-独立性条件进行放宽,得到卷积独立随机变量的中心极限定理.     

Simulating ion clustering in potassium thiocyanate aqueous solutions with various ion-water models

Using a molecular dynamics simulation technique,we compared several commonly used ion-water models to describe the microscopic structures and dynamics in KSCN aqueous solutions.Results are compared with observations of femtosecond infrared vibrational-energy transfer and anisotropy measurements.The Jorgensen/TIP4P model is found to provide the best reproduction of clustering properties such as percentage of clustered ions,cluster-size distribution,concentration dependence of the water,and ion-rotation time constants.