Microstructural and mechanical analysis of Cu and Au interconnect on various bond pads

Effects of High Temperature Storage (HTS) and bonding toward microstructure change of intermetallic compound (IMC) at the wire bonding interface of 3 types of bond pad (Al, AlSiCu and NiPdAu) were presented in this paper. Optical and electron microscope analyses revealed that the IMC growth rate of samples under 175 and 200 °C HTS increased in the order of Al > AlSiCu > NiPdAu. Besides, higher HTS and bonding temperatures also promoted higher IMC thickness. The compositional study showed that higher HTS and bonding temperature developed rapid interdiffusion in bonding interface. In the mechanical ball shear test, a decrease of the shear force of Al and AlSiCu bond pads after 500 h HTS was believed due to poorly developed IMC at bonding interface. On the other hand, shear force degradation at 1000 h was due to excessive growth of IMC that in turn causes the formation of defects. For NiPdAu bond pad, increasing trend of shear force with HTS duration at 175 °C implied a good reliability of the Cu wire bonding. The rapid microscopic inspection on Cu wired Al bond pad under HTS 175 °C showed the IMC development from the periphery to the center of the ball bond. However, after 500 h voids started to develop until the crack was observed at 1000 h.     

An Investigation into the Migration of Segments in Crosslinked Fluorinated Polyimide Adhesive

Crosslinked fluorinated polyimides (CFPI) were successfully synthesized to study and explore the effect of cross-linkage on the migration of fluorinated segments and on the adhesion strength. Characterization by dynamic thermomechanical analysis (DMA) and thermo gravimetric analysis (TGA) confirmed good thermal properties of CFPI. X-ray photoelectron spectroscopy (XPS) results showed that the ratio of fluorinated component (6FDA-ODA) concentration of the surface to the bulk decreased with the crosslink density. The water contact angle of CFPI was lower than that of non-crosslinked fluorinated polyimide, indicating that the migration of fluorinated groups to the surface was reduced by the presence of cross-linkage. Therefore, CFPI, with no fluorine segregation on the surface, exhibited excellent wetting of adherent surfaces and adhesion strength, which was proved by lap shear strength (LSS) measurements and scanning electron microscopy.     

次线性期望下的一般中心极限定理

受Peng-中心极限定理的启发,本文主要应用G-正态分布的概念,放宽Peng-中心极限定理的条件,在次线性期望下得到形式更为一般的中心极限定理.首先,将均值条件E[X_n]=ε[X_n]=0放宽为|E[X_n]|+|ε[X_n]|=O(1/n);其次,应用随机变量截断的方法,放宽随机变量的2阶矩与2+δ阶矩条件;最后,将该定理的Peng-独立性条件进行放宽,得到卷积独立随机变量的中心极限定理.     

Simulating ion clustering in potassium thiocyanate aqueous solutions with various ion-water models

Using a molecular dynamics simulation technique,we compared several commonly used ion-water models to describe the microscopic structures and dynamics in KSCN aqueous solutions.Results are compared with observations of femtosecond infrared vibrational-energy transfer and anisotropy measurements.The Jorgensen/TIP4P model is found to provide the best reproduction of clustering properties such as percentage of clustered ions,cluster-size distribution,concentration dependence of the water,and ion-rotation time constants.     

A versatile A2 + B3 approach to hyperbranched polyacenaphthenequinones

A series of hyperbranched polyacenaphthenequinones has been prepared by superelectrophilic aromatic substitution of (substituted) acenaphthenequinone and 1,3,5‐tris‐(4‐phenoxybenzoyl)benzene via a facile A₂ + B₃ approach. Because of the strongly increased reactivity of the second A functionality, gelation was efficiently avoided during the polymerization. The structure of the resulting polymer was characterized by NMR spectroscopy and gel permeation chromatography. Further modification of the hyperbranched polyacenaphthenequinone was explored both on the acenaphthenequinone and aromatic moieties. Moreover, the polymer modified through sulfonation was investigated as a water‐soluble acid catalyst for the degradation of biomass resources. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2596‐2603     

Enantioselective Synthesis of a Chiral Coordination Polymer with Circularly Polarized Visible Laser

Circular dichroism is known to be the feature of a chiral agent which has inspired scientist to study the interesting phenomena of circularly polarized light (CPL) modulated molecular chirality. Although several organic molecules or assemblies have been found to be CPL‐responsive, the influence of CPL on the assembly of chiral coordination compounds remains unknown. Herein, a chiral coordination polymer, which is constructed from achiral agents, was used to study the CPL‐induced enantioselective synthesis. By irradiation with either left‐handed or right‐handed CPL during the reaction and crystallization, enantiomeric excesses of the crystalline product were obtained. Left‐handed CPL resulted in crystals with a left‐handed helical structure, and right‐handed CPL led to crystals with a right‐handed helical structure. It is exciting that the absolute asymmetric synthesis of a chiral coordination polymer could be enantioselective when using CPL, and provides a strategy for the control of the chirality of chiral coordination polymers.     

Sorption equilibria of CO2 on silica-gels in the presence of water

The sorption equilibria of carbon dioxide on three types of silica gel (SG) with different pore size distributions in the presence of water were studied experimentally using a volumetric method at 275?K with pressures from 0 to 3.7?MPa. Both the pore size distribution of the silica gel and the quantity of pre-sorbed water impact the formation of the CO₂ hydrates. For wet silicon gel A(SG-A) with water loading ratio of 0.75, the highest CO₂ sorption was about 2.5?mmol of CO₂ per gram of dry sorbent at 275?K. Similarly, the highest sorption was about 2.7?mmol for wet SG-B with R _w =0.81. However, CO₂ hydrate did not form on the wet surface of SG-C due to its large pore sizes.     

Nanoscale-confined crystallization in epoxy resin and polyethylene-block-poly(ethylene oxide) diblock copolymer blends

In this paper, the nanoscale-confined crystallization behavior and crystallization kinetics in blends of double-crystalline polyethylene-block-poly(ethylene oxide) (PE-b-PEO) diblock copolymer with diglycidyl ether of bisphenol A epoxy resin were investigated. The results showed that there appeared three crystallization regimes related to the crystallization of the PE block within three different microenvironments in the epoxy resin/PE-b-PEO blends. The Avrami index n is around 1.8–2.4, suggesting PE block of the copolymer in the blends exhibited nanoscale-confined crystallization behavior by homogeneous nucleation. The PE block nanoscale-confined crystallization is ascribed to the formation of the strong intermolecular hydrogen bonding interaction between hydroxyl groups of amine-cured epoxy and ether oxygen atoms of PEO, as seen from Fourier transform infrared spectroscopy spectra.