Propagation of optical vortex solitons due to the Gouy phase in strongly nonlocal nonlinear media

In this paper,we present a study on the propagation of the symmetrical optical vortices formed by two collinear Laguerre-Gauss solitons in strongly nonlocal nonlinear media.The optical vortices,which move along the beam axis as the light propagates,result in a rotation of the beam’s transverse profile.This physical reason of the rotation is the Gouy phase acquired by the component beams.     

Si1Sb2Te3 phase change material for chalcogenide random access memory

This paper investigated phase change Si1Sb2Te3 material for application of chalcogenide random access memory. Current-voltage performance was conducted to determine threshold current of phase change from amorphous phase to polycrystalline phase. The film holds a threshold current about 0.155 mA, which is smaller than the value 0.31 mA of Ge2Sb2Te5 film. Amorphous Si1Sb2Te3 changes to face-centred-cubic structure at ~ 180℃ and changes to hexagonal structure at ~ 270℃. Annealing temperature dependent electric resistivity of Si1Sb2Te3 film was studied by four-point probe method. Data retention of the films was characterized as well.     

Ionization-induced electron trapping in ultrarelativistic plasma wakes

The onset of trapping of electrons born inside a highly relativistic, 3D beam-driven plasma wake is investigated. Trapping occurs in the transition regions of a Li plasma confined by He gas. Li plasma electrons support the wake, and higher ionization potential He atoms are ionized as the beam is focused by Li ions and can be trapped. As the wake amplitude is increased, the onset of trapping is observed. Some electrons gain up to 7.6 GeV in a 30.5 cm plasma. The experimentally inferred trapping threshold is at a wake amplitude of 36 GV/m, in good agreement with an analytical model and PIC simulations.     

Propagation properties of beams generated by Gaussian mirror resonator in uniaxial crystals

Based on the paraxial vectorial theory of beams propagating in uniaxially anisotropic media, we have derived the analytical propagation equations of beams generated by Gaussian mirror resonator (GMR) in uniaxial crystals, and given the typical numerical example to illustrate our analytical results. Due to the anisotropy crystals, the ordinary and extraordinary beams originated by incident beams generated by GMR propagate with different diffraction lengths, thus the linear polarization state and axial symmetry of the incident beams generated by GMR do not remain during propagating in crystals.     

新一代运载火箭时序仿真系统信号完整性分析

新一代运载火箭时序仿真系统具有数字电路速度快、集成度高的特点,系统要求发出多路高精度时序、时串信号以满足新一代运载火箭地面测试设备的检查与校准需求,因此信号完整性问题在系统设计中不容忽视。针对仿真系统的典型模块(USB 3.0 Super-speed差分线、FPGA外设数据走线、时钟走线)进行建模分析仿真得出PCB硬件电路设计参数,给出时序仿真系统设计信号完整性问题的抑制和解决方法,优化了板级信号质量,改善系统可靠性、工作连续性和输出精度,可有效提高新一代运载火箭测试效率和测试可靠性。     

Exploring Microstructures and Interphase Properties of Surface- Grafted Diblock Copolymers in a Homopolymer Melt by Self-Consistent Field Theory Simulations

Polymeric self-consistent field theory is used to investigate microstructures and interphase properties of diblock copolymers grafted onto solid surfaces in a homopolymer melt. The calculations show that the grafted diblock copolymers can self-assemble into hemispherical microstructures at low grafting densities of the diblock copolymers. The morphology transforms into hemicylinder-like and sandwich-like lamellar microstructures with an increase in the chain-grafting density. The effective thickness of the grafted block layer and the interphase width between the homopolymer melt and the grafted copolymers strongly depend on the physicochemical parameters of the system, such as the composition of the grafted copolymer, the chemical incompatibility between the different components, the length ratio of grafted copolymer to homopolymer, and the grafting density of the diblock copolymers. In addition, the above computational results of microphase-separated structures and interphase properties are qualitatively compared with our previous experimental observations. The comparison indicates that our theoretical results not only reproduce the general feature of the experimental observations, but also elucidate the internal structural information and complement the findings in the region of high grafting densities of diblock copolymers.     

基于GIS与灰色关联分析的水位方案综合评价模型

通过分析传统方法在方案形成与指标获取方面的不足,综合应用GIS与灰色关联分析,构建了顾及方案形成与指标获取的正常蓄水位优选综合评价模型,并提出了基于GIS的方案指标获取方法.针对现有灰色关联模型对不同评价尺度指标分开处理的局限,改进了灰色关联度分析模型,并引入了相对理想度的概念.通过逆向指标正向化,将正常蓄水位方案矩阵转换为理想度矩阵,使不同量纲的指标数据经归一化后具有相同的评价尺度,从而为关联度计算提供可靠的数据.最后,通过实例证明了GIS方法的可操作性和综合评价模型的正确性.     

基体电导率对0-3型铁电复合材料高压极化行为及损耗的影响

提出了一个0-3型聚合物基铁电复合材料的直流高压极化模型.模型中考虑了聚合物/铁电陶瓷界面处自由电荷的积聚及极化初始时刻的真实情况,利用拉普拉斯静电场方程,并结合边界条件,得到了直流高压极化过程中复合材料的极化强度、界面电流密度等随时间的演化方程,同时得到介电常数、介质损耗等物理特性的表达式.此外,实验制备了分别以环氧树脂E-44和铁电共聚物P(VDF-TrFE)为基体的两种0-3型铁电复合材料.从理论和实验两方面研究了基体电导率对极化行为以及介质损耗的影响.两方面结果均表明：随基体电导率增加,极化时间缩短,陶瓷相的极化强度及复合材料的整体电性能提高,但是漏电流及介质损耗增加.而且实验结果与直流高压极化模型的预测结果符合. 关键词： 铁电复合材料 电导率 极化 介质损耗     

Universal critical properties of the Eulerian bond-cubic model

We investigate the Eulerian bond-cubic model on the square lattice by means of Monte Carlo simulations,using an efficient cluster algorithm and a finite-size scaling analysis.The critical points and four critical exponents of the model are determined for several values of n.Two of the exponents are fractal dimensions,which are obtained numerically for the first time.Our results are consistent with the Coulomb gas predictions for the critical O(n) branch for n < 2 and the results obtained by previous transfer matrix calculations.For n=2,we find that the thermal exponent,the magnetic exponent and the fractal dimension of the largest critical Eulerian bond component are different from those of the critical O(2) loop model.These results confirm that the cubic anisotropy is marginal at n=2 but irrelevant for n < 2.