Using nitrile-derivatized amino acids as infrared probes of local environment

It is well-known that the C=N stretching vibration in acetonitrile is sensitive to solvent. Therefore, we proposed in this contribution to use this vibrational mode to report local environment of a particular amino acid in proteins or local environmental changes upon binding or folding. We have studied the solvent-induced frequency shift of two nitrile-derivatized amino acids, which are, AlaCN and PheCN, in H(2)O and tetrahydrofuran (THF), respectively. Here, THF was used to approximate a protein's hydrophobic interior because of its low dielectric constant. As expected, the C=N stretching vibrations of both AlaCN and PheCN shift as much as approximately 10 cm(-1) toward higher frequency when THF was replaced with H2O, indicative of the sensitivity of this vibration to solvation. To further test the utility of nitrile-derivatized amino acids as probes of the environment within a peptide, we have studied the binding between calmodulin (CaM) and a peptide from the CaM binding domain of skeletal muscle myosin light chain kinase (MLCK(579-595)), which contains a single PheCN. MLCK(579-595) binds to CaM in a helical conformation. When the PheCN was substituted on the polar side of the helix, which was partially exposed to water, the C=N stretching vibration is similar to that of PheCN in water. In constrast, when PheCN is introduced at a site that becomes buried in the interior of the protein, the C=N stretch is similar to that of PheCN in THF. Together, these results suggest that the C=N stretching vibration of nitrile-derivatized amino acids can indeed be used as local internal environmental markers, especially for protein conformational studies.     

席夫碱自组装单分子膜的电化学行为

利用自组装技术将席夫碱硫醇衍生物在金表面形成自组装单分子膜,并初步研究了此自组装单分子膜的电化学行为,发现该席夫碱分子在0.1 mol•L－1的KCl溶液中具有电化学不可逆氧化还原行为，且随着自组装时间的增加表观电极反应速率常数值显著减小,最后减小为0,并对此进行了解释.     

Isotopic determination of selenium in biological materials with inductively coupled plasma mass spectrometry

A method for the isotopic determination of selenium in biological matrices is described. The method is based on hydride generation inductively coupled plasma mass spectrometry (ICP-MS). The development is specifically related to the requirements of stable isotope tracer studies in human subjects. The method is based on isotope dilution using 82Se as the in vitro spike and can quantify the 74Se and 77Se contents of samples. It involves wet oxidation (HNO3 - H2O2 or HNO3 - HClO4) of the 82Se-spiked matrix, reduction to selenite by boiling with HCl followed by measurement of the isotope ratios (82Se/77Se and 74Se/77Se) in the gas stream (H2Se) generated from on-line reduction of the sample selenite with NaBH4. Compared with the isotopic signal resulting from a selenite solution containing 5 ng ml-1 of Se, the total sample blank contributions at m/z = 74, 77 and 82 were less than 5% of the respective isotope signal. Worst-case absolute detection limits were 0.2-0.9 ng of Se, depending on the isotope used. Ion beam intensity ratios were measured with an over-all precision [relative standard deviation (RSD)] of 1% for both isotope pairs. Measured ratios (MRa/b) were stable during a given day's operation within the expected precision of the measurements but varied for different days. The magnitude of MRa/b was generally independent of the nature of the matrix. Highly linear relationships were found between ion beam intensity ratios (MRa/b) and the corresponding true isotope ratios for calibration solutions whose isotope ratios had been altered by as much as one order of magnitude.(ABSTRACT TRUNCATED AT 250 WORDS)     

Ion size dominated 1D and 2D Salen lanthanide coordination complexes and their luminescence

Lewis acid/base addition between Ln(NO₃)₃ · 6H₂O (Ln = Pr, Nd, Sm, Eu, Tb and Lu) and H₂salen [H₂salen = N,N′-ethylenebis(salicylideneimine)] gives rise to an array of coordination polymeric structures. Crystal structural analysis reveals that Salen effectively functions as a bridging ligand in these compounds. The size of the lanthanide ions controls the structures of these Salen lanthanide complexes. Two representative structures with one dimensional and two dimensional topologies, viz. [Pr(H₂salen)(NO₃)₃(CH₃OH)₂]_n (1) and [Ln(H₂salen)_1.5(NO₃)₃]_n [Ln = Pr (2), Nd (3), Sm (4), Eu (5), Tb (6) and Lu (7)] are reported. Luminescent spectra of complexes 4 and 5 exhibit characteristic metal-centered emission lines. However, the characteristic luminescence of the terbium(III) ion is not observed either in solution or in the solid state of complex 6.     

含轴手性磺酸配体的镉配合物(英)

The crystal structure of [Cd(BDA)(phen)₂(H₂O)](H₂O)₂ (1) (BDA=6,6′-dibromo-2,2′-dimethoxy-1,1′-binaphthylene-4,4′-disulfonate, phen=1,10-phenanthroline)consists of a cadmium center whose coordination environment can be best described as a slightly distorted octahedron defined four nitrogen atoms from two phen ligands and two oxygen atoms differently from BDA ligand and water. There are strong hydrogen-bonding interactions between water and sulfonate group of BDA ligands to construct the 3D network. CCDC: 277921.     

Quassinoids from seeds of Brucea Javanica and their anticomplement activities

Abstract

An investigation on seeds of Brucea javanica led to the acquisition of a new quassinoid, 20-hydroxyyadanzigan (1), along with five known quassinoids (2–6). The structure of the new compound was elucidated on the basis of extensive spectral analysis. All of the compounds were assayed for their anticomplement activities through classical and alternative pathways. Compounds 1–6 exhibited potent anticomplement activity with CH₅₀ and AP₅₀ values of 0.032–0.075?mg/mL and 0.061–0.118?mg/mL, respectively. Moreover, the structure-activity relationships of these compounds are discussed.

     

Titania membrane preparation with chemical stability for very hash environments applications

The high-quality tubular titania MF membranes are successfully prepared by dip-coating techniques and systematically investigated with regard to their corrosive resistances. The experiments show that dispersants PAA and anatase powder were preferably employed to prepare desired suspensions with solid loading 10–15 wt.% and that suspensions properties significantly affect the final membranes quality. The titania MF membranes with pure water permeability 742.42 l m⁻² h⁻¹ bar⁻¹ and 0.1 μm pore diameter have been obtained using the prepared suspensions. The corrosion resistance of titania membranes exhibits that the anatase layers are more stable than the alumina supports in boiling corrosive medium and that the poor quality titania MF membranes become more deteriorated due to its top layer pore blockages and fouling layer formation, which provides a wide range of practical application fields in very hash environments with reliable data supports.     

Polarized Raman Spectra VI. A Short Note on the Raman Spectra of p-Polyphenyls

The Raman spectra of the p-polyphenyls: benzene, biphenyl, p-terphenyl, and p-quaterphenyl, are compared with their electronic spectra. The relative intensity of the double bond stretching mode around 1600 Kaisers to that of the breathing mode around 1000K increases steadily when the phenyl chain is lengthened. This intensity ratio can be calculated using our theory proposed previously.¹ The results are in very good agreement with the experimental observations     

Polarized Raman Spectra VII Correlations and Assignments of Raman Lines in p-Polyphenyls

The Raman spectra of powdered biphenyl, p-terphenyl, and p-quaterphenyl are compared with each other and also with the Raman spectrum of benzene. Most Raman lines in polyphenyls can be considered as derived from normal vibrations in benzene. The intense lines are thus assigned and the correlations between them are established.     

基于定向纳米碳管气体放电的气敏传感器研究

介绍了一种基于定向纳米碳管的气敏传感器,以生长定向纳米碳管的氧化铝模板作为阳极,铝板作为阴极,利用纳米碳管的尖端发射效应,在较低的电压下使气体产生放电现象。通过对纳米碳管在气体中击穿电压和放电电流的测量,实现对气体的定性定量检测。同时纳米碳管气敏传感器还具有体积小、灵敏度高、稳定性好、响应速度快、在常温常压下即可进行检测等优点,具有较好的应用前景。