新显色剂噻二唑偶氮二甲氨基苯甲酸与铜(Ⅱ)显色反应的研究和应用

本文研究了噻二唑偶氮二甲氨基苯甲酸与Cu(Ⅱ)显色反应条件,确定在pH3.0～4.5范围形成蓝紫色络合物,组成比为1:1,摩尔吸光系数ε=4.55×10~4L·mol~(-1)·cm~(-1),1gβ=7.32。应用拟定的方法测定天然水中微量铜,获得满意的结果。     

电渗流与缓冲液浓度之间数学关系的线性表达

It was believed that electroosmotic mobility μeo is inversely proportional to the square root of the ionic strength L But the linear relationship for regression analysis was expressed differently in different papers. The paper studied the linear expression of the mathematical relationship between μeo and c （background buffer concentration） by mathematical transform and real experimental data.μeo values of fused silica capillary were determined in four buffer systems. Their experimental conditions were controlled carefully for decreasing temperature difference AT and pH difference ApH in 50 μm ID capillary, in which no double layer overlap existed. The linear relationship between the reciprocal of electroosmotic mobility and the square root of concentration （or ionic strength） was derived by mathematical method. The regression analysis of experimental data was shown to well correspond to the relationship. The constants in regression equation could be well defined and the calculated results were acceptable.     

Synthesis and characterization of ionic organotin compounds [R2SnCl2(2-quin)](HNEt3) and crystal structures of [(2,4-Cl2-C6H3CH2)2SnCl2(2-quin)](HNEt3)

Eight ionic organotin compounds [R₂SnCl₂(2-quin)]⁻(HNEt₃)⁺ have been synthesized by reactions of 2-quinH with R₂SnCl₂ (R = PhCH₂1, 2-Cl-C₆H₄CH₂2, 4-Cl-C₆H₄CH₂3, 2-F-C₆H₄CH₂4, 4-F-C₆H₄CH₂5, 4-CN-C₆H₄CH₂6, Ph 7, 2,4-Cl₂-C₆H₃CH₂8) in the presence of organic base NEt₃, and their structures have been characterized by elemental analysis, IR and multinuclear NMR (¹H, ¹³C, ¹¹⁹Sn) spectroscopies. The structure of [(2,4-Cl₂-C₆H₃CH₂)₂SnCl₂(2-quin)]⁻(NEt₃)⁺ (8) has been determined by X-ray diffraction study. Studies show that compound 8 has a monomeric structure with the central tin atom six-coordinate in a distorted octahedral configuration and the nitrogen atoms of the 2-quin ligands are coordinating to the tin atom in all the eight compounds.     

Hydrogen bonding and π–π stacking in 6‐hydroxy­biochanin A monohydrate

In the lattice of the title compound (systematic name: 5,6,7‐trihydroxy‐4′‐meth­oxy­isoflavone monohydrate), C₁₆H₁₂O₆·H₂O, the isoflavone mol­ecules are linked into chains through R₄³(17) motifs composed via O—H⋯O and C—H⋯O hydrogen bonds. Centrosymmetric R₄²(14) motifs assemble the chains into sheets. Hydrogen‐bonding and aromatic π–π stacking inter­actions lead to the formation of a three‐dimensional network structure.     

A mechanistic and synthetic study of organocopper substitution reactions with some homoallylic and cyclopropylcarbinyl substrates : Application to isoprenoid synthesis

The double bond of cholesteryl and 5-norbornen-2-yl tosylates and the cyclopropane ring of cyclopropylmethylcarbinyl tosylate participate in organocuprate substitution reactions; retention of configuration at the nucleofugal sp³-C atom and skeletal reorganizations are observed. A plausible mechanism for these reactions is discussed. Coupling of homogeranyl iodide with a four-carbon, functionalized, vinylic cuprate reagent is applied to stereospecific synthesis of trans, trans-farnesol.     

Tris（2,2＇-bipyridyl） Ruthenium（Ⅱ） Doped Silica Film Modified Indium Tin Oxide Electrode and Its Electrochemiluminescent Properties

An approach was reported to synthesize silica hybridized ruthenium bipyridyl complex through amidation reaction by covalent attachment of bis（bipyridyl）-4,4＇-dicarboxy-2,2＇-bipyridyl-ruthenium to （3-aminopropyl）-triethoxysilane. The hybrid complex then was gelatinized through acid catalytic hydrolysis method and a sol-gel modified indium tin oxide electrode was prepared via spin coating technique. As prepared indium tin oxide electrode possesses good stability therein with excellent electrochemiluminescence behavior.     

Development and validation of HPLC methods for enantioseparation of mirtazapine enantiomers at analytical and semipreparative scale using polysaccharide chiral stationary phases

Novel HPLC methods were developed for the analytical and semipreparative resolution of new antidepressant drug mirtazapine enantiomers. At analytical scale, the separation of the mirtazapine enantiomers was investigated using both cellulose and amylose tris(3,5-dimethylphenylcarbamate) (CDMPC and ADMPC) chiral stationary phases under normal-phases and polar organic modes. Good baseline enantioseparation was achieved using cellulose tris(3,5-dimethylphenylcarbamate) chiral stationary phases under both normal-phases and polar organic modes. Furthermore, the elution order of mirtazapine enantiomic pairs was found reversed by changing the stationary phase from the amylose-based ADMPC–CSPs to its cellulose-based counterpart, CDMPC–CSPs. The validation of the analytical methods including linearity, limit of detection (LOD), limit of quantification (LOQ), recovery and precision, together with the semipreparative resolution of mirtazapine racemate were carried out using cellulose tris(3,5-dimethylphenylcarbamate) chiral stationary phases and methanol as mobile phase without any basic additives under polar organic mode. At analytical scale, the elution times of both enantiomers were less than 6 min at normal temperature and 1.0 ml/min, with the separation factor () 1.99 and the resolution factor (Rs) 3.56. Then, the analytical methods were scaled up to semipreparative loading to obtain small quantities of both mirtazapine enantiomers. At semipreparative scale, about 16 mg/h enantiomers could be isolated and elution times of both enantiomers were less than 10 min at 2.0 ml/min. To increase the throughput, the technique of boxcar injections was used. One enantiomer ((−)-(R)-mirtazapine) was isolated with purity of >99.9% e.e. and >98.0% yield and another ((+)-(S)-mirtazapine) was isolated with purity of >97.0% e.e. and >99.0% yield. In addition, optical rotation and circular dichroism (CD) spectroscopy of both mirtazapine enantiomers isolated were also investigated.     

Self－assembly of Novel Hetero[3]rotaxane, [2]Rotaxanes and [2]Catenane

One linear template 13 and one cyclophane template 15, both incorporating two electron rich 1,4‐dialkoxybenzene units and one diamide unit, have been synthesized. By utilizing donor‐acceptor interaction and/or intermolecular hydrogen bonding assembling principles, one novel hetero[3]rotazane 22·4Cl, possessing one neutral and one tetracationic ring components, has been synthesized from 13, through neutral [2]rotaxane 21 as intermediate. With 15 as template, tetracationic [2]catenane 23·4PF₆ was assembled by using donor‐acceptor interaction, but no neutral [2]rotaxane could be obtained under the typical conditions of hydrogen bonding assembling principle. The interlocked supramolecular compounds have been characterized and their spectral properties are investigated.     

Fabrication of poly(dimethylsiloxane) microfluidic system based on masters directly printed with an office laser printer

Applications of poly(dimethylsiloxane) (PDMS)-based microfluidic systems are more popular nowadays. Previous fabrication methods of the masters for PDMS microchannels require complicated steps and/or special device. In this paper, we demonstrated that the toner printed on the transparency film with the office laser printer (1200 dpi) can be used as the positive relief of the masters. The transparency film was printed in two steps in order to obtain the same printing quality for the crossed lines. With the laser-printed master, the depth of the fabricated PDMS microchannels was ca. 10 microm and the smallest width was ca. 60 microm. Surface characteristics of the PDMS/PDMS microchannels were performed with SEM. Their electrokinetic properties were investigated by the aids of the measurement of electroosmotic flow (EOF) and the Ohm's curve. Using the PDMS/PDMS microchip CE systems, electroactive biological molecules and non-electroactive inorganic ions were well separated, respectively. This simple approach could make it easy to carry out the studies of PDMS microfluidic systems in more general labs without special devices.     

Comparison of the structures of an atomic three-valence-electron system with a nuclear three-valence-neutron system

A comparison has been made between the states of a 3-valence-electron system and a 3-valence-neutron system. The fermions are supposed to move in a sphere. The structures and internal motions of the head-states (the lowest of a given^2S+1 L ) of these systems havingL=0,S=1/2 and 3/2, and even and odd parity have been investigated. We have found that the symmetry governing the particular quantum system plays an essential role. In particular, all the nodal surfaces in the head-states originate from symmetry but not from dynamics. Consequently, the head-states of different dynamic systems have similar structures and similar internal motions.