Identification and quantification of anticarcinogens in garlic extract and licorice root extract powder

Nine organosulfur compounds present in an aged garlic extract and two isoflavonoids and one triterpenoid present in a licorice root extract powder have been identified and quantified. Quantification involved solvent extraction and gas chromatographic – mass spectrometric analysis (garlic extract) or hydrolysis, solvent extraction, and liquid chromatographic analysis (licorice root extract powder). Although the garlic extract proved to be unstable and the concentration of the organosulfur compounds varied with time, one analysis of the extract gave the following results: methyl disulfide (0.607 μg/g), methyl trisulfide (0.181 μg/g), allyl sulfide (2.02 μg/g), allyl disulfide (0.784 μg/g), allyl trisulfide (0.795 μg/g), allyl methyl sulfide (1.64 μg/g), allyl methyl disulfide (0.411 μg/g), allyl methyl trisulfide (0.695 μg/g), and ethyl 2-propenesulfinate (11.4 μg/g). The analysis of the licorice root extract powder gave the following results: formononetin (1.92 mg/g), isoliquiritigenin (9.61 mg/g), and 18β-glycyrrhetinic acid (43.9 mg/g). Methods were successfully developed to quantify the same compounds in the serum of test animals which had consumed feed spiked with garlic extract or licorice root extract powder. Only the 18β-glycyrrhetinic acid could be detected in the sera of such animals, however. An effort was also made to determine serum levels of prostaglandin E2 to correlate its inhibition with levels of the dietary components, but the prostaglandin E2 levels were too low to measure.     

Non-uniform exponential tension splines

We describe explicitly each stage of a numerically stable algorithm for calculating with exponential tension B-splines with non-uniform choice of tension parameters. These splines are piecewisely in the kernel of D ²(D ²–p ²), where D stands for ordinary derivative, defined on arbitrary meshes, with a different choice of the tension parameter p on each interval. The algorithm provides values of the associated B-splines and their generalized and ordinary derivatives by performing positive linear combinations of positive quantities, described as lower-order exponential tension splines. We show that nothing else but the knot insertion algorithm and good approximation of a few elementary functions is needed to achieve machine accuracy. The underlying theory is that of splines based on Chebyshev canonical systems which are not smooth enough to be ECC-systems. First, by de Boor algorithm we construct exponential tension spline of class C ¹, and then we use quasi-Oslo type algorithms to evaluate classical non-uniform C ² tension exponential splines.      

Substituent effects on carbocation stability: the pK(R) for p-quinone methide

A value of k(H) = 1.5 x 10(-)(3) M(-)(1) s(-)(1) has been determined for the generation of simple p-quinone methide by the acid-catalyzed cleavage of 4-hydroxybenzyl alcohol in water at 25 degrees C and I = 1.0 (NaClO(4)). This was combined with k(s) = 5.8 x 10(6) s(-)(1) for the reverse addition of solvent water to the 4-hydroxybenzyl carbocation [J. Am. Chem. Soc. 2002, 124, 6349-6356] to give pK(R) = -9.6 as the Lewis acidity constant of O-protonated p-quinone methide. Values of pK(R) = 2.3 for the Lewis acidity constant of neutral p-quinone methide and pK(add) = -7.6 for the overall addition of solvent water to p-quinone methide to form 4-hydroxybenzyl alcohol are also reported. The thermodynamic driving force for transfer of the elements of water from formaldehyde hydrate to p-quinone methide to form formaldehyde and p-(hydroxymethyl)phenol (4-hydroxybenzyl alcohol) is determined as 6 kcal/mol. This relatively small driving force represents the balance between the much stronger chemical bonds to oxygen at the reactant formaldehyde hydrate than at the product p-(hydroxymethyl)phenol and the large stabilization of product arising from the aromatization that accompanies solvent addition to p-quinone methide. The Marcus intrinsic barrier for nucleophilic addition of solvent water to the "extended" carbonyl group at p-quinone methide is estimated to be 4.5 kcal/mol larger than that for the addition of water to the simple carbonyl group of formaldehyde. O-Alkylation of p-quinone methide to give the 4-methoxybenzyl carbocation and of formaldehyde to give a simple oxocarbenium ion results in very little change in the relative Marcus intrinsic barriers for the addition of solvent water to these electrophiles.     

Scrambling of oxygen-18 during the "borderline" solvolysis of 1-(3-nitrophenyl)ethyl tosylate

[reaction: see text] There is substantial isomerization (kiso=0.32 x 10(-3) s(-1)) of 3-NO2C6H4(13)CH(Me)OS(18O)2Tos during solvolysis (ksolv=1.04 x 10(-3) s(-1)) in 50/50 trifluoroethanol/water, even though the estimated lifetime of the putative 1-(3-nitrophenyl)ethyl carbocation intermediate of solvolysis (ca. 10(-13) s(-1)) is too short to allow rearrangement that exchanges the positions of 16O and 18O at the sulfonate leaving group. This suggests that isomerization proceeds by a mechanism that avoids formation of the carbocation-anion pair intermediate.     

Activation of orotidine 5'-monophosphate decarboxylase by phosphite dianion: the whole substrate is the sum of two parts

We report that the binding of phosphite dianion to orotidine 5'-monophosphate decarboxylase (OMPDC) results in an 80 000-fold increase in kcat/Km for decarboxylation of the truncated substrate, 1-(beta-d-erythrofuranosyl)orotic acid (EO), which lacks a 5'-phosphodianion moiety. The intrinsic binding energy (IBE) of phosphite dianion in the transition state is 7.8 kcal/mol, which represents a very large fraction of the 11.8 kcal/mol IBE of the phosphodianion group of the natural substrate orotidine 5'-monophosphate (OMP). The data give kcat = 160 +/- 70 s-1 for turnover of EO in the active site of OMPDC containing phosphite dianion, which is significantly larger than kcat = 15 s-1 for turnover of OMP. Despite the weaker binding of the individual EO and HPO32- "parts" (KmKd = 0.014 M2) than of OMP (Km = 1.6 x 10-6 M), once bound, OMPDC provides a slightly greater stabilization of the transition state for reaction of the parts than of the whole substrate. Thus, the covalent connection between the reacting portion of the substrate and the nonreacting phosphodianion group is not necessary for efficient catalysis. This implies that a major role of the phosphodianion group of OMP is to provide binding interactions that are used to drive an enzyme conformational change, resulting in formation of an active site environment optimized for transition state stabilization.     

Determination of chloramphenicol in bovine milk by liquid chromatography/tandem mass spectrometry

A rapid confirmatory liquid chromatographic/tandem mass spectrometic method was developed for determination of chloramphenicol in bovine milk. Chloramphenicol was extracted directly from milk by solid-phase extraction on a C18 cartridge. The extract was further cleaned up on neutral aluminium oxide. Three transition products were monitored in negative ion mode after atmospheric pressure chemical ionization. The detection capability related to the transition product of lowest abundance was 0.03 microg/kg. The mean recovery was 90% at levels of 0.1-0.2 microg/kg. The relative repeatability standard deviations were 4.3, 3.8, and 2.8% at levels of 0.1, 0.2, and 1.0 microg/kg, respectively.     

Matrix-induced peak enhancement of pesticides in gas chromatogrtaphy: Is there a solution?

In this study, it is shown that calibration solution prepared in control matrix extrix extract can be used to compensate for matrix-induced chromatographic response enhancement observed for certain pesticedes. This phenomenon is characterized by enhanced chromatographic response for certain pesticides in the presence of matrix du to reduced analyte loss during injection. Unacceptably high recoveries are seen for affected pesticides when maatrix-free solutions are used for reference and calibration. The effects of matrix concentration on overall enhancement and linear response were determined. When used as reference standards for the determination of recovery, matrix-standard solutions were found to provide acceptable recoveries for pesticides subject to matrix-induced chromatographic response enhancement along with other pesticides. General guidelines are presented for using matrix-standard calibration solutions in pesticide residue analysis.     

Solvent-assisted supercritical fluid extraction for the isolation of semivolatile flavor compounds from the cinnamons of commerce and their separation by series-coupled column gas chromatography

Solvent-assisted supercritical fluid extraction is superior to Soxhlet extraction, solvent extraction at reflux, and simultaneous setam distillation solvent extraction for the isolation of semivolatile compounds from the cinnamons of commerce. Optimized extraction conditions are described using carbon dioxide at 300 atm and 70°C to extract 0.5 g of powdered cinnamon mixed with 4.5 g of anhydrous sodium sulfate to which 1.0 ml of acetonitrile was added at the start of the sequential 30 min static and 30 min dynamic extraction. The semivolatile compounds were collected by solvent trapping in ethyl acetate and analyzed directly by series coupled-column gas chromatography after filtration and partial solvent evaporation. Twenty-one compounds identified by mass spectrometry were quantified in twenty-four samples of cinnamon and cassia purchased in Sri Lanka, Korea, United Kingdom, and the United States of America. True cinnamon is easily distinguished from cassia by the presence of eugenol, absence of δ-cadinene, much lower amounts of coumarin, and larger amounts of benzyl benzoate. Principal component analysis using the relative composition of the twelve major semivolatile compounds provides a clear distinction between true cinnamon and cassia as well as useful interspecies differences which can be used for further classification.     

Two-electron transfer for Tl(aq)(3+)/Tl(aq)(+) revisited. Common virtual [Tl(II)-Tl(II)](4+) intermediate for homogeneous (superexchange) and electrode (sequential) mechanisms

Homogeneous and electrochemical two-electron transfers within the Tl(aq)(3+)/Tl(aq)(+) couple are considered on a common conceptual basis. For the 2 equiv electrochemical reduction of Tl(aq)(3+) to Tl(aq)(+), the intermediate state with a formal reduction potential, E(1) = 1.04 +/- 0.10 V vs the normal hydrogen electrode, was detected, different from the established value of 0.33 V for a Tl(3+)/Tl(2+) couple. Examination of obtained electrochemical (cyclic voltammetry (CV) and rotating disk electrode techniques, along with the CV-curve computer simulation procedure) and literature data indicate that the detected formal potential cannot be the property of electrode-adsorbed species, but rather of the covalently interacting dithallium intermediate [Tl(II)-Tl(II)](4+) located at the outer Helmholtz plane. The analysis of microscopic mechanisms, based on the recent hypothesis of H. Taube and the Marcus-Hush theory extended by Zusman and Beratan, and Koper and Schmickler, revealed that the homogeneous process most probably takes place through the superexchange inner-sphere two-electron-transfer mechanism, via an essentially virtual (undetectable) dithallium intermediate. In contrast, the electrochemical process occurs through a sequential mechanism, via the rate-determining step of Tl(aq)(2+) ion formation immediately followed by activationless formation of the metastable (CV-active) dithallium state. The second electrochemical electron-transfer step is fast, and shows up only in the peak height (but not in the shape) of the observed CV cathodic wave. The anodic wave for a microscopically reverse process of the oxidation of Tl(aq)(+) to Tl(aq)(3+) cannot be observed within the considered potential range due to the blocking of through-space electron transfer by the competitor process of ion transfer to the electrode.