High-precision measurements of seawater Pb isotope compositions by double spike thermal ionization mass spectrometry

A new method for the determination of seawater Pb isotope compositions and concentrations was developed, which combines and optimizes previously published protocols for the separation and isotopic analysis of this element. For isotopic analysis, the procedure involves initial separation of Pb from 1 to 2 L of seawater by co-precipitation with Mg hydroxide and further purification by a two stage anion exchange procedure. The Pb isotope measurements are subsequently carried out by thermal ionization mass spectrometry using a ²⁰⁷Pb–²⁰⁴Pb double spike for correction of instrumental mass fractionation. These methods are associated with a total procedural Pb blank of 28 ± 21 pg (1sd) and typical Pb recoveries of 40–60%. The Pb concentrations are determined by isotope dilution (ID) on 50 mL of seawater, using a simplified version of above methods. Analyses of multiple aliquots of six seawater samples yield a reproducibility of about ±1 to ±10% (1sd) for Pb concentrations of between 7 and 50 pmol/kg, where precision was primarily limited by the uncertainty of the blank correction (12 ± 4 pg; 1sd). For the Pb isotope analyses, typical reproducibilities (±2sd) of 700–1500 ppm and 1000–2000 ppm were achieved for ²⁰⁷Pb/²⁰⁶Pb, ²⁰⁸Pb/²⁰⁶Pb and ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb, ²⁰⁸Pb/²⁰⁴Pb, respectively. These results are superior to literature data that were obtained using plasma source mass spectrometry and they are at least a factor of five more precise for ratios involving the minor ²⁰⁴Pb isotope. Both Pb concentration and isotope data, furthermore, show good agreement with published results for two seawater intercomparison samples of the GEOTRACES program. Finally, the new methods were applied to a seawater depth profile from the eastern South Atlantic. Both Pb contents and isotope compositions display a smooth evolution with depth, and no obvious outliers. Compared to previous Pb isotope data for seawater, the ²⁰⁶Pb/²⁰⁴Pb ratios are well correlated with ²⁰⁷Pb/²⁰⁶Pb, underlining the significant improvement achieved in the measurement of the minor ²⁰⁴Pb isotope.     

Self‐Organization of Gold Nanoparticle Assemblies with 3D Spatial Order and Their External Stimuli Responsiveness

Gold nanoparticles (AuNP) with pyridyl end‐capped polystyrenes (PS‐4VP) as “quasi‐monodentate” ligands self‐assemble into ordered PS‐4VP/AuNP nanostructures with 3D hexagonal spatial order in the dried solid state. The key for the formation of these ordered structures is the modulation of the ratio AuNP versus ligands, which proves the importance of ligand design and quantity for the preparation of novel ordered polymer/metal nanoparticle conjugates. Although the assemblies of PS‐4VP/AuNP in dispersion lack in high dimensional order, strong plasmonic interactions are observed due to close contact of AuNP. Applying temperature as an external stimulus allows the reversible distortion of plasmonic interactions within the AuNP nanocomposite structures, which can be observed directly by naked eye. The modulation of the macroscopic optical properties accompanied by this structural distortion of plasmonic interaction opens up very interesting sensoric applications.

     

Synthesis of pyrano[2,3-<Emphasis Type="Italic">c</Emphasis>]pyrazoles by ionic liquids under green and eco-safe conditions

Optimization of a green approach to the synthesis of pyrano[2,3-c]pyrazoles based on the one-pot, four-component condensation via a domino Knoevenagel/Michael/cyclization sequence was investigated. This method involved the evaluation of the activity of several ionic liquids (ILs) in various solvents. This one-pot, four-component reaction revealed simplicity, higher yield and lower toxicity advantages over a corresponding three-component method. The effect of reaction parameters including the type and amount of catalyst, type of solvent, reaction temperature and time were studied with respect to yield of pyrano[2,3-c]pyrazoles. Catalyst recyclability and time-saving aspects of the reaction suggest that this method presents real alternatives over conventional reaction protocols.     

Looped structure of flowerlike micelles revealed by 1H NMR relaxometry and light scattering

We present experimental proof that so-called "flowerlike micelles" exist and that they have some distinctly different properties compared to their "starlike" counterparts. Amphiphilic AB diblock and BAB triblock copolymers consisting of poly(ethylene glycol) (PEG) as hydrophilic A block and thermosensitive poly(N-isopropylacrylamide) (pNIPAm) B block(s) were synthesized via atom transfer radical polymerization (ATRP). In aqueous solutions, both block copolymer types form micelles above the cloud point of pNIPAm. Static and dynamic light scattering measurements in combination with NMR relaxation experiments proved the existence of flowerlike micelles based on pNIPAm(16kDa)-PEG(4kDa)-pNIPAm(16kDa) which had a smaller radius and lower mass and aggregation number than starlike micelles based on mPEG(2kDa)-pNIPAm(16kDa). Furthermore, the PEG surface density was much lower for the flowerlike micelles, which we attribute to the looped configuration of the hydrophilic PEG block. (1)H NMR relaxation measurements showed biphasic T(2) relaxation for PEG, indicating rigid PEG segments close to the micelle core and more flexible distal segments. Even the flexible distal segments were shown to have a lower mobility in the flowerlike micelles compared to the starlike micelles, indicating strain due to loop formation. Taken together, it is demonstrated that self-assemblies of BAB triblock copolymers have their hydrophilic block in a looped conformation and thus indeed adopt a flowerlike conformation.     

Poly(D,L-lactide-co-glycolide)/hydroxyapatite core-shell nanospheres. Part 3: properties of hydroxyapatite nano-rods and investigation of a distribution of the drug within the composite

A step-by-step analysis of the formation and the drug loading of the poly(D,L-lactide-co-glycolide)/hydroxyapatite (PLGA/HAp) composite was carried out in a perspective of the following parameters: the structure, the morphology and the adsorption/desorption properties of the composite's bioceramic part. The authors demonstrated the importance of the material's capacity to form a fine dispersion of solid HAp particles, as an initial step, for the further loading of the drug and for the formation of the core-shell structures. The nanometer-sized rods of HAp have the capacity of ensuring a rapid adsorption and a controlled desorption of the drug from their surface, and they can act as a nucleating site for the formation of polymeric cores. Each component of this material was labeled with fluorescence dye, which enabled an insight into the distribution of the components in the core-shells that were obtained as the final outcome. Such an analysis showed a high level of uniformity among the cores enclosed within polymeric shells. From a practical perspective, the labeling of each component of the composite can be regarded as an additional functionality of the material: labeling can enable us to monitor its action during the healing process. This ability to be easily detected is expected to enhance the procedure for the controlled delivery of antibiotics after their local implantation of carriers loaded with the antibiotic and to provide more careful control over this process.     

Application of complementary mass spectrometric techniques to the identification of ketoprofen phototransformation products

Ketoprofen (KP) is a nonsteroidal anti-inflammatory drug, which during UV irradiation rapidly transforms into benzophenone derivatives. Such transformation products may occur after topical application of KP, which is then exposed to sunlight resulting in a photo-allergic reaction. These reactions are mediated by the benzophenone moiety independently of the amount of allergen. The same reactions will also occur during wastewater or drinking water treatment albeit their effect in the aqueous environment is yet to be ascertained. In addition, only a few such transformation products have been recognised. To enable the detection and structural elucidation of the widest range of KP transformation products, this study applies complementary chromatographic and mass spectrometric techniques including gas chromatography coupled to single quadrupole or ion trap mass spectrometry and liquid chromatography hyphenated with quadrupole-time-of-flight mass spectrometry. Based on structural information gained in tandem and multiple MS experiments, and on highly accurate molecular mass measurements, chemical structures of 22 transformation products are proposed and used to construct an overall breakdown pathway. Among the identified transformation products all but two compounds retained the benzophenone moiety--a result, which raises important issues concerning the possible toxic synergistic effects of KP and its transformation products. These findings trigger further research into water treatment technologies that would limit their entrance into environmental or drinking waters.     

The Grob/Eschenmoser fragmentation of cycloalkanones bearing β-electron withdrawing groups: a general strategy to acyclic synthetic intermediates

Introduction of a β-electron withdrawing group to cycloalkanones allows facile C-C bond fragmentation. The reaction has been demonstrated with a large range of ring sizes, bearing various leaving and electron withdrawing groups, and using a variety of nitrogen and oxygen containing nucleophiles (>30 examples). The application of fragmentation products to the preparation of substituted γ-lactones has been demonstrated. Mechanistic studies are reported which are suggestive of a Grob/Eschenmoser type reaction.     

ATRP, subsequent azide substitution and 'click' chemistry: three reactions using one catalyst in one pot

This communication describes a novel and fast reaction to substitute the living chain end after Atom Transfer Radical Polymerization (ATRP) by an azide functionality. The reaction is catalyzed by the ATRP catalyst at room temperature in aqueous solution and can be followed by a 'click' reaction using again the same catalyst.     

Homotopically nontrivial solutions for a spherically symmetric gravitational field

The structure of kink solutions to the Einstein field equations is discussed and the most general form of spherically symmetric kink metric is constructed. A number of fluid solutions are investigated and an imperfect fluid solution with nonzero heat conduction is presented.