Free-carrier absorption modulation in silicon nanocrystal slot waveguides

Free-carrier absorption (FCA) has proven to be an important obstacle in the development of a silicon-based laser; however, FCA may serve as a potential advantage in active silicon-based switches or modulators. In this work, we present FCA modulation in slot waveguides with silicon nanocrystals (Si-ncs) embedded in SiO(2) as the low-index slot material. Slot waveguides were fabricated with and without Si-ncs, and the presence of Si-ncs was shown to increase the pump-induced FCA loss in the waveguides by a factor of 4.5. We modeled the Si-nc material using a four-level rate equation analysis to estimate the excited population of Si-ncs, allowing us to extract a value of 2.6 × 10(-17) cm(2) for the FCA cross section of the Si-nc material.     

On ideals with the Rees property

A homogeneous ideal I of a polynomial ring S is said to have the Rees property if, for any homogeneous ideal ${J \subset S}$ which contains I, the number of generators of J is smaller than or equal to that of I. A homogeneous ideal ${I \subset S}$ is said to be ${\mathfrak{m}}$ -full if ${\mathfrak{m}I:y=I}$ for some ${y \in \mathfrak{m}}$ , where ${\mathfrak{m}}$ is the graded maximal ideal of ${S}$ . It was proved by one of the authors that ${\mathfrak{m}}$ -full ideals have the Rees property and that the converse holds in a polynomial ring with two variables. In this note, we give examples of ideals which have the Rees property but are not ${\mathfrak{m}}$ -full in a polynomial ring with more than two variables. To prove this result, we also show that every Artinian monomial almost complete intersection in three variables has the Sperner property.     

Lagrangian and Eulerian models for simulating turbulent dispersion and coalescence of droplets within a spray

Lagrangian and Eulerian modelling approaches are compared for simulating turbulent dispersion and coalescence of droplets within a spray. Both models predict similar droplet dispersion rates and shifts in droplet size distribution due to coalescence within the spray, over a wide range of droplet and gas flows, and for sprays with different droplet-size distributions at the nozzle exit. The computer time required for simulating coalescence within a steady axisymmetric spray is of a similar order of magnitude regardless of which formulation, Eulerian or Lagrangian, is adopted. However, the Lagrangian formulation is more practical in terms of the range of applicability and ease of implementation.     

Fabrication and activity of silicate nanoparticles and nanosilicate-entrapped enzymes using polyethyleneimine as a biomimetic polymer

In nature, some peptides induce precipitation of silicic acid into silica nanoparticles such as is found in marine algae called diatoms. However, polybasic polymers can act as peptide mimics; one such polymer, polyethyleneimine (PEI), has the advantage that it is stable at room temperature and is inexpensive, in comparison with synthetic peptides. We describe the fabrication and characterization of biosilicate nanoparticles formed by mimicking the peptides using PEI. Brownian motion nanoparticle tracking analysis and field emission gun scanning electron microscopy have been used for the first time to characterize nanoparticles made with tetramethyl orthosilicate (TMOS) and PEI to investigate the fundamental factors that affect particle properties. These factors include the effect of phosphate concentration, PEI molecular weight, TMOS concentration, and species of alkoxy-silane used. The properties of the particles are compared with other particles made with polymers that induce silication. Our results show that using PEI gives differences in particle size compared with previous work using other polymers that induce silication. The entrapment of enzymes during the silication process, rationale for using nonphosphate and phosphate buffers during enzyme entrapment, and the analysis of enzyme activity are also presented. Because enzymes can be entrapped during fabrication, it means that there are many future possibilities for the use of silicate nanoparticles containing enzymes, such as biosensors and biocatalytic reactors.     

A new thermoelectric material: CsBi4Te6

The highly anisotropic material CsBi(4)Te(6) was prepared by the reaction of Cs/Bi(2)Te(3) around 600 degrees C. The compound crystallizes in the monoclinic space group C2/m with a = 51.9205(8) A, b = 4.4025(1) A, c = 14.5118(3) A, beta = 101.480(1) degrees, V = 3250.75(11) A(3), and Z = 8. The final R values are R(1) = 0.0585 and wR(2) = 0.1127 for all data. The compound has a 2-D structure composed of NaCl-type [Bi(4)Te(6)] anionic layers and Cs(+) ions residing between the layers. The [Bi(4)Te(6)] layers are interconnected by Bi-Bi bonds at a distance of 3.2383(10) A. This material is a narrow gap semiconductor. Optimization studies on the thermoelectric properties with a variety of doping agents show that the electrical properties of CsBi(4)Te(6) can be tuned to yield an optimized thermoelectric material which is promising for low-temperature applications. SbI(3) doping resulted in p-type behavior and a maximum power factor of 51.5 microW/cm.K(2) at 184 K and the corresponding ZT of 0.82 at 225 K. The highest power factor of 59.8 microW/cm.K(2) at 151 K was obtained from 0.06% Sb-doped material. We report here the synthesis, physicochemical properties, doping characteristics, charge-transport properties, and thermal conductivity. Also presented are studies on n-type CsBi(4)Te(6) and comparisons to those of p-type.     

Preparation and dilute solution properties of model gemini nonionic surfactants

Dimeric poly(ethylene oxide) surfactants (or nonionic gemini surfactants) with the structure (Cn-2H2n-3CHCH2O(CH2CH2O)mH)2(CH2)6 (or GemnEm), where n is the alkyl length and m is the average number of ethylene oxides per head group, were synthesized. Surfactants were synthesized with alkyl chain lengths n = 12, 14, and 20 and m = 5, 10, 15, 20, and 30. Water solubilities and cloud temperatures at 1 wt% were determined by measuring turbidity as a function of temperature. Cloud temperatures increase with m and decrease with n, as observed for conventional surfactants. For large m the cloud temperatures were all above 100 degrees C. Surfactants with small m (i.e., n = 12, 14, m = 5 and n = 20, m = 10) were insoluble at room temperature, forming two-phase mixtures. Critical micelle concentrations (CMCs) were measured using a pyrene fluorescence method and are all in the range of 10(-7) to 10(-6) M, with the lowest values from the surfactants with large n and small m. CMCs of mixtures with both anionic and nonionic conventional (monomeric) surfactants were well described by an ideal mixing model.     

Quantification of midazolam,morphine and metabolites in plasma using 96‐well solid‐phase extraction and ultra‐performance liquid chromatography–tandem mass spectrometry

Currently, pharmacokinetic–pharmacodynamic studies of sedatives and analgesics are performed in neonates and children to find suitable dose regimens. As a result, sensitive assays using only small volumes of blood are necessary to determine drug and metabolite concentrations. We developed an ultra‐performance liquid chromatographic method with tandem mass spectrometry detection for quantification of midazolam, 1‐hydroxymidazolam, hydroxymidazolamglucuronide, morphine, morphine‐3‐glucuronide and morphine‐6‐glucuronide in 100 μL of plasma. Cleanup consisted of 96 wells micro‐solid phase extraction, before reversed‐phase chromatographic separation (ultra‐performance liquid chromatography) and selective detection using electrospray ionization tandem mass spectrometry. Separate solid‐phase extraction methods were necessary to quantify morphine, midazolam and their metabolites because of each group's physicochemical properties. Standard curves were linear over a large dynamic range with adequate limits of quantitation. Intra‐ and interrun accuracy and precision were within 85–115% (of nominal concentration using a fresh calibration curve) and 15% (coefficient of variation, CV) respectively. Recoveries were >80% for all analytes, with interbatch CVs (as a measure of matrix effects) of less than 15% over six batches of plasma. Stability in plasma and extracts was sufficient, allowing large autosampler loads. Runtime was 3.00 min per sample for each method. The combination of 96‐well micro‐SPE and UPLC‐MS/MS allows reliable quantification of morphine, midazolam and their major metabolites in 100 μL of plasma. Copyright © 2010 John Wiley & Sons, Ltd.     

[Al4(OH)2(OCH3)4(H2N‐bdc)3]⋅x H2O: A 12‐Connected Porous Metal–Organic Framework with an Unprecedented Aluminum‐Containing Brick

Al together now! A new stable aluminum aminoterephthalate system contains octameric building blocks that are connected by organic linkers to form a 12‐connected net (see picture). The structure adopts a cubic centered packing motive in which octameric units replace individual atoms, thus forming distorted octahedral (red sphere) and tetrahedral cages (green spheres) with effective accessible diameters of 1 and 0.45 nm, respectively.

     

Ammonium‐Based Cellulose Solvents Suitable for Homogeneous Etherification

New ammonium‐based cellulose solvents with triethylmethylammonium‐ and tributylmethylammonium cations and carboxylate anions were synthesized and investigated as potential solvents for cellulose. Triethylmethylammonium formate was found to dissolve cellulose. Small amounts of formic acid may be used to adjust the melting point of the organic salt and can increase the dissolution velocity of cellulose. Carboxymethylation as a common etherification reaction was investigated in the new ammonium‐based system. The watersoluble carboxymethyl cellulose obtained, had a degree of substitution as high as 1.55. An unconventional pattern of substitution was accessible.