Thermal decomposition mechanism of synthesized copper octoate

Present study describes the synthesis and characterization of copper octoate. Attenuated total reflectance–Fourier transformation infra red (ATR–FTIR) and energy dispersive X-ray (EDX) spectrometric techniques have been used for the characterization of the synthesized compound. The surface morphology of the compound has been studied using scanning electron microscopy (SEM). Thermal behavior and decomposition mechanism of copper octoate has been explained on the basis of simultaneous thermo-gravimetry–differential thermal analysis–evolved gas analysis (TG–DTA–EGA) and high temperature X-ray diffraction (HTXRD) measurements. Copper octoate is stable up to 250 °C. The decomposition process consists of two overlapping steps. A plausible decomposition mechanism is proposed and details of the studies carried out are being discussed here.     

Interpenetrating polymer network (IPN) nanogels based on gelatin and poly(acrylic acid) by inverse miniemulsion technique: synthesis and characterization

Novel interpenetrating polymer network (IPN) nanogels composed of poly(acrylic acid) and gelatin were synthesised by one pot inverse miniemulsion (IME) technique. This is based on the concept of nanoreactor and cross-checked from template polymerization technique. Acrylic acid (AA) monomer stabilized around the gelatin macromolecules in each droplet was polymerized using ammonium persulfate (APS) and tetramethyl ethylene diamine (TEMED) in 1:5 molar ratio and cross-linked with N,N-methylene bisacrylamide (BIS) to form semi-IPN (sIPN) nanogels, which were sequentially cross-linked using glutaraldehyde (Glu) to form IPNs. Span 20, an FDA approved surfactant was employed for the formation of homopolymer, sIPN and IPN nanogels. Formation of stable gelatin-AA droplets were observed at 2% surfactant concentration. Dynamic light scattering (DLS) and scanning electron microscopy (SEM) studies of purified nanogels showed small, spherical IPN nanogels with an average diameter of 255 nm. In contrast, sIPN prepared using the same method gave nanogels of larger size. Fourier-transform infrared (FT-IR) spectroscopy, SEM, DLS, X-ray photoelectron spectroscopy (XPS) and zeta potential studies confirm the interpenetration of the two networks. Leaching of free PAA chains in sIPN upon dialysis against distilled water leads to porous nanogels. The non-uniform surface of IPN nanogels seen in transmission electron microscopy (TEM) images suggests the phase separation of two polymer networks. An increase of N/C ratio from 0.07 to 0.17 (from PAA gel to IPN) and O/C ratio from 0.22 to 0.37 (from gelatin gel to IPN) of the nanogels by XPS measurements showed that both polymer components at the nanogel surface are interpenetrated. These nanogels have tailoring properties in order to use them as high potential drug delivery vehicles for cancer targeting.     

Synthesis,Spectral Characterization,and Antimicrobial Activity of Novel 2,4,6‐Trisubstituted Quinazoline Derivatives by Buchwald and Suzuki Coupling Reactions

A series of novel 2,4,6‐trisubstituted quinazoline derivatives were synthesized starting from 2‐amino‐5‐bromobenzoic acid. The structures of the newly synthesized compounds were established by IR, ¹H NMR, ¹³C NMR, and mass spectral data. All the compounds were tested for antimicrobial activity.     

Heat transfer in a visco-elastic fluid past a stretching sheet with viscous dissipation and internal heat generation

This paper deals with the study of heat transfer characteristics in the laminar boundary layer flow of a visco-elastic fluid over a linearly stretching continuous surface with variable wall temperature subjected to suction or blowing. The study considers the effects of frictional heating (viscous dissipation) and internal heat generation or absorption. An analysis has been carried out for two different cases of heating processes namely: (i) Prescribed surface temperature (PST) and (ii) Prescribed wall heat flux (PHF) to get the effect of visco-elastic parameter for various situations. Further increase of visco-elastic parameter is to decrease the skin friction on the sheet. The solutions for the temperature and the heat transfer characteristics are obtained in terms of Kummers function. Received: June 16, 2004; revised: February 8, 2005     

Dynamic Active Noise Control of Broadband Noise in Fighter Aircraft Pilot Helmet

This paper presents the development of a dynamic Active Noise Control (ANC) algorithm aimed towards reducing the broadband noise inside the helmet earcups of a fighter aircraft pilot helmet. The dynamic ANC involves a Variable Step-Size Griffiths (VSSG) FxLMS algorithm to attenuate noise entering directly through helmet, a LMS based adaptive noise canceller to attenuate noise entering through the pilot microphone, and energy detectors for failure protection and optimized battery power usage. The algorithms are implemented on Texas Instruments’ TMS320C6748 processor and are tested in a helmet ANC experimental setup.     

Effect of creatine monohydrate in improving cellular energetics and muscle strength in ambulatory Duchenne muscular dystrophy patients: a randomized,placebo-controlled P MRS study

Randomized, placebo-controlled single blinded study was carried out to evaluate the effect of oral creatine supplementation on cellular energetics, manual muscle test (MMT) score and functional status in steroid-naive, ambulatory boys suffering with Duchenne muscular dystrophy (DMD; n=33). Eighteen patients received creatine monohydrate (Cr; 5 g/day for 8 weeks), while 15 received placebo (500 mg of vitamin C). Phosphorus metabolite ratios were determined from the right calf muscle of patients using phosphorus magnetic resonance spectroscopy (³¹P MRS) both prior to (baseline) and after supplementation of Cr or placebo. In addition, metabolite ratios were determined in normal calf muscle of age and sex matched controls (n=8). Significant differences in several metabolite ratios were observed between controls and DMD patients indicating a lower energy state in these patients. Analysis using analysis of covariance adjusted for age and stature showed that the mean phosphocreatine (PCr)/inorganic phosphate (Pi) ratio in patients treated with Cr (4.7; 95% CI; 3.9–5.6) was significantly higher (P=.03) compared to the placebo group (3.3; 95% CI; 2.5–4.2). The mean percentage increase in PCr/Pi ratio was also more in patients <7 years of age compared to older patients after Cr supplementation indicating variation in therapeutic effect with the age. In the placebo group, significant reduction in PCr/Pi (P=.0009), PCr/t-ATP (P=.05) and an increase in phosphodiester (PDE)/PCr ratios was observed after supplementation. Further, in the placebo group, patients <7 years showed reduction of PCr/t-ATP and Pi/t-ATP compared to older patients (>7 years), after supplementation. These results imply that the significant difference observed in PCr/Pi ratio between the Cr and the placebo groups after supplementation may be attributed to a decrease of PCr in the placebo group and an increase in PCr in the Cr group. Changes in MMT score between the two groups was significant (P=.04); however, no change in functional scale (P=.19) was observed. Parents reported subjective improvement on Cr supplementation versus worsening in placebo (P=.02). Our results indicated that Cr was well tolerated and oral Cr significantly improved the muscle PCr/Pi ratio and preserved the muscle strength in short term. However, this study provides no evidence that creatine will prove beneficial after long-term treatment, or have any positive effect on patient lifespan.     

Dimeric compounds containing malonic acid as the central linking unit: synthesis and mesomorphic properties

Eight new dimeric compounds containing malonic acid as the central linking unit (series M- n - X ) have been synthesized and their mesomorphic properties studied. All these compounds are found to be liquid crystalline, forming mainly nematic and smectic phases. We have carried out microscopic textural observations, X-ray diffractometry as well as solid state NMR studies on these compounds.     

Porphyrins bearing mono or tripodal benzylphosphonic acid tethers for attachment to oxide surfaces

The ability to attach redox-active molecules to oxide surfaces in controlled architectures (distance, orientation, packing density) is essential for the design of a variety of molecular-based information storage devices. We describe the synthesis of a series of redox-active molecules wherein each molecule bears a benzylphosphonic acid tether. The redox-active molecules include zinc porphyrins, a cobalt porphyrin, and a ferrocene-zinc porphyrin. An analogous tripodal tether has been prepared that is based on a tris[4-(dihydroxyphosphorylmethyl)phenyl]-derivatized methane. A zinc porphyrin is linked to the methane vertex by a 1,4-phenylene unit. The tripodal systems are designed to improve monolayer stability and ensure vertical orientation of the redox-active porphyrin on the electroactive surface. For comparison purposes, a zinc porphyrin bearing a hexylphosphonic acid tether also has been prepared. The synthetic approaches for introduction of the phosphonic acid group include derivatization of a bromoalkyl porphyrin or use of a dimethyl or diethyl phosphonate substituted precursor in a porphyrin-forming reaction. The latter approach makes use of dipyrromethane building blocks bearing mono or tripodal dialkyl phosphonate groups. The zinc porphyrin-tripodal compound bearing benzylphosphonic acid legs tethered to a SiO(2) surface (grown on doped Si) was electrically well-behaved and exhibited characteristic porphyrin oxidation/reduction waves. Collectively, a variety of porphyrinic molecules can now be prepared with tethers of different length, composition, and structure (mono or tripodal) for studies of molecular-based information storage on oxide surfaces.     

An efficient chemoenzymatic approach to (S)-gamma-fluoroleucine ethyl ester

[reaction: see text] An asymmetric synthesis of (S)-gamma-fluoroleucine ethyl ester 1 is described. The key transformation involves a lipase-catalyzed dynamic ring-opening of 2-(3-butenyl)azlactone 7b with EtOH to give amide ester (S)-6b in 84% enantiomeric excess. Removal of the N-pentenoyl group with N,N'-dibromodimethylhydantoin in the presence of trifluoroacetic acid afforded the titled compound, which was isolated as its hydrogen sulfate salt in 75% yield and >97% ee.