STABILITY OF Se - Tl SCHOTTKY JUNCTIONS

Abstract

Evaporation of thallium on a crystallized layer of selenium results in an excellent Schottky diode, exhibiting a forward-to-reverse current ratio at 1 volt of some four to five orders of magnitude and a forward ideality factor close to unity. However, with the passage of time, there is a degradation in these electrical characteristics, if the thallium is exposed to the atmosphere, even at room temperature. The observed changes are a progressive increase in series resistance and a decrease in parallel capacitance. However, the changes with time can be greatly reduced if the thallium is covered with an evaporated film of Wood's metal. X-ray diffraction analysis of films of thallium deposited on glass substrates, shows that after prolonged exposure to air, the film is progressively transformed into Tl₂CO₃ . Oxide formation is only apparent after storage in oxygen, rather than air. The electrical degradation in the diodes is thus the result of atmospheric conversion of metallic thallium into the less conducting carbonate.     

A Facile Oxidation of Thiols to Disulfides Catalyzed by CoSalen

Abstract

A convenient and facile catalytic oxidation of thiols to the corresponding disulfides is described using CoSalen as the catalyst and air as the oxidizing agent. This new approach provides an efficient method for the preparation of symmetrical disulfides in high yields and under mild conditions.

[Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements for the following free supplemental resource: Spectroscopic Identification of Products 3a–3l.]     

Diffusion Mechanism of As‐spun Polyacrylonitrile Fiber in a Dimethyl Sulfoxide‐Water Coagulation Bath

In this paper, the diffusion mechanism of as‐spun PAN fiber was investigated in dimethyl sulfoxide‐water by determining the dynamic compositions of the fibers and the diffusion coefficients of solvent and nonsolvent during coagulation. The diffusion process could be divided into two stages. Results showed that the first stage of the diffusion process was the most important during the whole process, which was fundamental to further study on the formation mechanism. Also, compared with wet spinning, the dry‐jet wet spinning method had the advantage of mild coagulating at a high jet‐stretch. At high concentrations, the diffusion coefficients increased and the ratio of solvent diffusion coefficient to nonsolvent diffusion coefficient decreased; an increasing temperature resulted in the increase of both diffusion coefficients with a decrease in their ratios. To some extent, for the PAN‐DMSO‐water system, the more the ratios D_s*/D_n* tended to 1, the more the cross‐section shapes of as‐spun PAN fiber tended to be circular.     

Synthesis of Stimuli-responsive Nanoparticles by Solution Polymerization

In this study, stimuli-responsive nanoparticles were prepared by solution polymerization. Two synthesis routes are proposed to synthesize the particles, the monomer route and the polymer/monomer route. For the monomer route, pH and thermal sensitive nanoparticles were synthesized from acrylic acid and N-isopropylacrylamide. For the polymer/monomer route, the pH sensitive nanoparticles were synthesized from chitosan and acrylic acid. The effect of reaction time, initiator concentration and agitation rate on the particle size and the size distribution were investigated. The stimuli-responsive nanoparticles could be directly blended with other polymers to prepare stimuli-responsive functional membranes.     

Synthesis and Characterization of Silicone Modified Polyurethane Surfactant Useable at High Temperature

A series of novel silicone modified polyurethane (Si-PU) surfactants were successfully synthesized by using hydroxypropyl-terminated polydimethylsiloxane (HPMS), polyethylene glycol (PEG), dimethylolpropionic acid (DMPA) and isophoronediisocyanate (IPDI). The chemical structure of the surfactant was confirmed by FTIR and ¹H-NMR. TEM photographs showed that the micelles of the Si-PU surfactants dispersed in aqueous solution were spherical with the particle size in the range of 100–400 nm. Surface tension measurements indicated that these surfactants had low surface tension to 29.9 mN·m^?1and a definite critical micelle concentration to, approximately 5.0×10^?4–7.5×10^?4mol·L^?1. When the content of HPMS was 20 wt%, the surfactant's, emulsifying performance was superior to the traditionally available Span80/Tween80 mixed emulsifiers. In addition to that, no phase transition temperature was detected from 20°C to 90°C by fluorescence probe and DSC measurements, confirming the high thermal stability of the micelles.     

Study on the Supramolecular System of TAPP and Cyclodextrins by Spectroscopy

The ability of β-cyclodextrin (β-CD), γ-CD, hydroxypropyl-β-CD (HP-β-CD), trimethyl-β-CD (TM-β-CD), sulfurbutylether-β-CD (SBE-β-CD) and carboxymethyl-β-cyclodextrin (CM-β-CD) to break the aggregate of the meso-tetrakis(4-N-trimethylaminobenzyl)porphyrin (TAPP) and to form 2:1 inclusion complexes has been studied by absorption and fluorescence spectroscopy. The formation constants are calculated, respectively, by fluorimetry, from which the inclusion capacity of different CDs is compared and the inclusion mechanism of charged-β-CD (SBE-β-CD and CM-β-CD) is quite different from that of the parent β-CD. At lower pH, the complexation between TM-β-CD and H²TAPP²⁺ (the form of the diprotonated TAPP) hampers the continuous protonation of the pyrrole nitrogen of TAPP and the hydrophobic cavity may prefer to bind an apolar neutral porphyrin molecule. ¹HNMR data support the inclusion conformation of the porphyrin–cyclodextrin supramolecular system, indicating the interaction of the meso-phenyl groups of TAPP with the cavity of CDs. For this host–guest inclusion model, cyclodextrin being regarded as the protein component, which acts as a carrier enveloping the active site of heme prosthetic group within its hydrophobic environment, provides a protective sheath for the porphyrin, creating artificial analogues of heme-containing proteins. However, for TAPP, encapsulated within this saccharide-coated barrier, its photophysical and photochemical properties changed strongly.     

CuI‐Catalyzed Multicomponent Synthesis of Aminoindolizines from Aldehydes,Amines, and Alkynes under Solvent‐Free Conditions

A direct and efficient approach to 1‐aminoindolizines through three‐component one‐pot reaction of heteroaryl aldehydes, secondary amines and terminal alkynes catalyzed by CuI under solvent‐free conditions has been developed. This methodology provides a rapid access to substituted aminoindolizines with good yields (up to 97%).     

Ir和IrPd催化剂的合成及结构调控对其甲醇氧化性能的影响

以三嵌段共聚物P123(聚环氧乙烷-聚环氧丙烷-聚环氧乙烷,PEO₂₀-PPO₇₀-PEO₂₀)为还原剂和保护剂,比较了水热法和溶剂热法对纯Ir和IrPd合金催化剂合成及其电催化氧化甲醇(MOR)性能的影响。对于纯Ir催化剂,在相同条件下,溶剂热法能更好地促进Ir前驱体的还原。对于IrPd合金催化剂,溶剂热法可制得表面富含Ir但MOR活性较低的核壳结构产物(IrPd-S)。水热反应得到的不同原子比(IrPd、Ir₂Pd、IrPd₂)的产物粒径更小,元素分布更均匀。其中比例为1∶1的IrPd (IrPd-H)催化剂的MOR电催化活性最高。上述结果表明,通过调节溶剂类型以及P123的结构诱导作用,可以有效地调节纯Ir和IrPd合金催化剂的结构、表面组成和电催化活性。