Study on the reaction of triple helix poly(A:2I) with Cu~(2+)

The effect of Cu2+ on the triple-stranded helical structure of poly(A:2I) was studied by means of circular dichroism spectral method with the help of ultraviolet spectral and ethidium bromide fluorescence probe methods. It was found that Cu2+ destabilizes the structure of the triple helix poly(A:2I) and induces its structural transformations, meanwhile, the transformations can be partially reversed by a higher NaCl concentration. The structural transformations may be expressed by the following scheme: poly(A:2I) - poly(A:I) + poly(I)- poly(A) + 2poly(I)     

Ge—132与稀土离子的配合物及其对单核苷酸磷酯键的催化水解作用

Ｇｅ－１３２的羧酸阴离子与稀土离子螯合配位，生成３：１型配合物，在配合物中，Ｇｅ－１３２的ＧｅＯ３／２基团水解为Ｇｅ（ＯＨ）３，并且不参与稀土配位，系列稀土离子配合物的结构性质基本相同，在５０℃，ｐＨ值为６的水溶液中，该配合物选择性地催化５’－ＡＭＰ或５‘－ｄＡＭＰ的磷酯键水解断裂、生成相应的核苷和磷酸，而不影响碱基与戌糖之间的苷键。     

硫化物纳米级粒子化膜的形成与气相性质的影响

采用偏振光反光度、紫外及可见光谱、电子显微镜形貌观察、粒子大小测定及电子衍射等方法加以系统研究硫化锌纳米级粒子化膜的制备与气相性质的影响．     

褐煤超临界流体抽提产物中脂肪烃组成结构的特征

用硅胶-氧化铝柱色谱预分离和色谱-质谱分析研究了两种褐煤超临界流体抽提物中脂肪烃馏分组成结构特征。结果表明,除主要成份正构烷烃(C_(13)～C_(33))外,尚有少量的类异戊二烯烃(姥鲛烷、植烷等)和萜烷。其中萜烷以五环三萜为主(C_(27)、C_(29)～C_(32)藿烷类化合物),并有一定量的C_(27)、C_(29)和C_(30)藿烯,倍半萜和三环二萜烷含量很少。未检出甾烷。此外,还检出一完整系列的烯烃。试验结果表明,超临界流体抽提条件对褐煤抽出物各组分、含量及其分布有一定的影响。     

丙酮在XeCl准分子激光辐射下的多光子电离和碎裂研究

我们用扩散分子束多光子电离光谱技术研究了丙酮在XeCl准分子激光辐射下的多光子电离和碎裂行为。实验表明丙酮没有产生母体离子峰(m/e=58), 只给出m/e=43和15两个峰, 分别对应于丙酮光解所产生的两个碎片CH_3 CO和CH_3。其离子信号(1)分别与激光强度(Ⅰ)的3和3.6次方成正比。分析表明离子是由中性碎片电离产生的。     

烯烃不对称双羟化及其反应机理的研究进展

本文综述了近年来四氧化锇催化烯烃不对称双羟化及其反应机理的研究进展。Sharpless等对烯烃双羟化机理的透彻研究导致了不对称双羟化方法的优化。     

A comparative study on photo-induced electron transfer from fluorescein to anthraquinone and injection into colloidal TiO2

A dyad-anthraquinone-methyl ester of fluorescein-and its model compound-butyl ester-were synthesized. The effects of photo-induced electron transfer from fluorescein to an organic anthraquinone acceptor and injection into inorganic colloidal TiO(2) were studied respectively. It is found that the photo-induced electron transferring to an organic acceptor is much faster than injecting into inorganic colloidal particles when fluorescein was excited by visible light. While inorganic colloidal TiO(2) was excited by UV, the electron of fluorescein will inject into TiO(2).     

Molecular and nanoscale materials and devices in electronics

Over the past several years, there have been many significant advances toward the realization of electronic computers integrated on the molecular scale and a much greater understanding of the types of materials that will be useful in molecular devices and their properties. It was demonstrated that individual molecules could serve as incomprehensibly tiny switch and wire one million times smaller than those on conventional silicon microchip. This has resulted very recently in the assembly and demonstration of tiny computer logic circuits built from such molecular scale devices. The purpose of this review is to provide a general introduction to molecular and nanoscale materials and devices in electronics.     

C59H3N异构体的结构与稳定性的理论研究

分别用MNDO,AM1和PM3三种半经验方法对C59HN所有1-2,1-4和1-6氢加成物C59H3N的异构体进行几何构型全优化,结合频率分析及HF/6-31G单点能计算,确定了各异构体的基态结构及其相对稳定性,计算结果表明,C59HN氢加成物的立体选择性规律与C60和C60H2的不同,最稳定异构体不是1-2加成物,而是1-4加成的6,18-或12,15-异构体,次稳定异构体为1-2加成物,三种半经验方法计算得到的两者能量差为13～15kJ/mol,N原子取代碳笼骨架C原子后,改变了碳笼氢加成物的立体选择性规律.     

水热合成CdS纳米晶体的形貌控制研究

研究了水热合成CdS纳米晶体形貌的化学控制，选择不同的络合试剂为模板,研究其对水热合成CdS纳米晶体形貌的影响.实验发现若以络合试剂乙二胺、甲胺为模板时，产品CdS晶体的形貌分别为（20～30） nm×（200～600） nm和（40～50） nm×（200～600） nm尺寸的纳米棒;而以络合试剂吡啶、 氨为模板时，产品CdS晶体的形貌分别为平均尺寸约30 nm和20 nm的纳米颗粒.用XRD、TEM、XPS、PL和Raman光谱等技术对所得CdS纳米棒进行了表征.同时对水热合成CdS纳米晶体形貌的模板控制机制进行了探讨，提出了一种水热合成CdS纳米棒的络合物结构诱导生长机理.