Propagation properties of beams generated by Gaussian mirror resonator in uniaxial crystals

Based on the paraxial vectorial theory of beams propagating in uniaxially anisotropic media, we have derived the analytical propagation equations of beams generated by Gaussian mirror resonator (GMR) in uniaxial crystals, and given the typical numerical example to illustrate our analytical results. Due to the anisotropy crystals, the ordinary and extraordinary beams originated by incident beams generated by GMR propagate with different diffraction lengths, thus the linear polarization state and axial symmetry of the incident beams generated by GMR do not remain during propagating in crystals.     

抗氧化剂抗脂质过氧化机制的ESR研究

以NADH诱导的心肌线粒体损伤体系为模型,在体外用ESR研究了谷胱甘肽(GSH)、超氧化物歧化酶(SOD)及辣根过氧化物酶(HRP)的抗氧化机制.结果表明,低浓度的GSH可部分抑制体系中自由基的生成;SOD与HRP以适当比例共同作用,可完全抑制体系中自由基的生成,较好地防止脂质过氧化的发生.     

Photothermal deflection measurement of effective gas diffusion coefficient of a porous medium

In this work, an effective gas diffusion coefficient of a porous medium was measured using photothermal deflection (PD) technique. An in-house made Loschmidt diffusion cell with a photothermal-deflection probe were employed to measure the effective gas diffusion coefficient of a gas diffusion layer (GDL) with a porosity ε ≈ 0.7. The concentration evolutions of CO₂ in O₂ with and without the GDL were measured, respectively, using a transverse normal PD technique. The concentration variations were used to deduce the gas diffusion coefficients in the presence and absence of the GDL by solving mass diffusion equations. The effective gas diffusion coefficient of the GDL was calculated from the diffusion coefficients using a model of an equivalent resistance to diffusion and found to be 4.39 × 10^-6 m²s^-1, demonstrating that PD technique can be employed to determine the effective gas diffusion coefficient of a porous medium.     

Room-temperature cw and pulsed operation of a diode-end-pumped Tm:YAP laser

We report the continuous-wave and acousto-optical Q-switched operation of a diode-end-pumped Tm:YAP laser. Continuous-wave output power of 3.5 W at 1.99 μm was obtained under the absorbed pump power of 14 W. Under Q-switched laser operation, the average output power increased from 1.57 W to 2.0 W, with an absorbed pump power of 12.6 W, as the repetition rate increased from 1 kHz to 10 kHz. The maximum Q-switched pulse energy was 1.57 mJ with a repetition rate of 1 kHz. The minimum pulse width was measured to be about 80 ns, corresponding to a peak power of 19.6 kW. PACS 42.55.Rz; 42.55.Xi; 42.60.Gd     

A weight’s agglomerative method for detecting communities in weighted networks based on weight’s similarity

This paper proposes the new definition of the community structure of the weighted networks that groups of nodes in which the edge's weights distribute uniformly but at random between them. It can describe the steady connections between nodes or some similarity between nodes' functions effectively. In order to detect the community structure efficiently, a threshold coefficient κ to evaluate the equivalence of edges' weights and a new weighted modularity based on the weight's similarity are proposed. Then, constructing the weighted matrix and using the agglomerative mechanism, it presents a weight's agglomerative method based on optimizing the modularity to detect communities. For a network with n nodes, the algorithm can detect the community structure in time O(n²log₂ⁿ). Simulations on networks show that the algorithm has higher accuracy and precision than the existing techniques. Furthermore, with the change of κ the algorithm discovers a special hierarchical organization which can describe the various steady connections between nodes in groups.     

Preparation and properties of SnS film grown by two-stage process

SnS films have been prepared by a novel two-stage process. It involved sputtering of Sn film on glass substrate and sulfurization of the thin metallic tin precursor layers in a vacuum furnace. The X-ray diffraction results showed that the SnS layers had orthorhombic structure and (0 4 0) preferential growth is more and more obvious with the increase of sulfurization time. The SnS film obtained by this work shows high optical absorption efficiency, and the film has a direct optical band gap of about 1.3 eV. The films show p-type conductivity and the resistivity of SnS film decreased obviously under illumination.     

Spin-glass behavior and magnetocaloric effect in melt-spun TbCuAl alloys

Magnetic properties and magnetocaloric effects of amorphous and crystalline TbCuAl ribbons are investigated by measuring their ac susceptibilities including a nonlinear term and dc magnetizations. The in-phase third harmonic ac susceptibility is found to be negative. It can be well fitted by the expression at high temperatures, indicating a spin-glass behavior in amorphous TbCuAl alloy. ΔT_f(ω)/[T_f(ω)Δlog₁₀ω], a possible distinguishing criterion to judge the presence of a spin-glass behavior is ∼0.011. The frequency-dependent data can be well fitted by the conventional critical slowing down law and the spin-glass transition temperature is obtained to be 20.1 K. The maximum of magnetic entropy change reaches 4.5 J kg⁻¹ K⁻¹ for a field change of 0-50 000 Oe, while the crystalline TbCuAl compound experiences a simple ferromagnetic-to-paramagnetic phase transition. The peak value of magnetic entropy change is obtained at the Curie temperature and reaches 14.4 J kg⁻¹ K⁻¹ for the same field change, which is much larger than that of amorphous TbCuAl alloy.     

Luminescence and scintillation of Eu2+‐doped high silica glass

High silica glass doped with Eu²⁺ ions was prepared as a scintillating material by impregnation of Eu ions into a porous silica glass followed by reduction sintering in CO atmosphere. A dominant emission band of the Eu²⁺ 5d–4f transition peaking around 430 nm was observed in the luminescence spectrum with the excitation peak around 280 nm and no emission from Eu³⁺ was present. Photoluminescence decay kinetics was governed by decay times of a few microseconds. The Eu²⁺‐doped high silica glass exhibited comparable energy resolution and slightly higher photoelectron yield with respect to the Bi₄Ge₃O₁₂ crystal in the pulse height spectra for X‐ray photon energies within 22–60 keV. Furthermore, a factor of 1.2 higher radioluminescence intensity was observed as well. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Near QED regime of laser interaction with overdense plasmas

Interaction of laser plulses with intensities up to 10²⁵?W/cm² with overdense plasma targets is investigated via three-dimensional particle-in-cell simulations. At these intensities, radiation of electrons in the laser field becomes important. Electrons transfer a significant fraction of their energy to γ-photons and obtain strong feedbacks due to radiation reaction (RR) force. The RR effect on the distribution of laser energies among three main species: electrons, ions and photons is studied. The RR and electron-positron pair creation are implemented by a QED model. As the laser intensity inreases, the ratio of laser energy coupled to electrons drops while the one for γ-photons reaches up to 35%. Two distinctive plasma density regimes of the high-density carbon target and low-density solid hydrogen target are identified from the laser energy partitions and angular distributions of photons. The power-laws of absorption efficiency versus laser intensity and the transition of photon divergence are revealed. These show enhanced generation of γ-photon beams with improved collimation in the relativistically transparent regime. A new effect of transverse trapping of electrons inside the laser field caused by the RR force is observed: electrons can be unexpectedly confined by the intense laser field when the RR force is comparable to the Lorentz force. Finally, the RR effect and different regions of photon emission in laser-foil interactions are clarified.