聚苯氧基磷酸联苯二酚酯/聚磷酸铵膨胀阻燃剂对环氧树脂阻燃性能影响研究

以聚苯氧基磷酸联苯二酚酯(PBPP)与聚磷酸铵(APP)组成复合阻燃剂,对环氧树脂(EP)进行阻燃改性.通过氧指数(LOI)、垂直燃烧(UL-94)、热失重(TGA)、锥形量热(CONE)和扫描电镜(SEM)等方法研究改性环氧树脂的阻燃性能和阻燃机理.结果表明,PBPP/APP体系对EP具有较好的阻燃性能,阻燃剂添加量为10%时能使环氧树脂的氧指数提高到29.6%,垂直燃烧等级达到UL94 V-0级,残炭量大大增加;平均热释放速率下降45.7%,热释放速率峰值下降51.0%,有效燃烧热平均值下降21.1%;TGA、CONE、SEM等综合分析显示了PBPP/APP改性后的环氧树脂比纯环氧树脂具有更高的热稳定性,燃烧后能够形成连续、致密、封闭、坚硬的焦化炭层,在聚合物表面产生有效覆盖、隔绝了氧气,改善了环氧树脂的燃烧性能.     

Periodic Solutions of Delay Differential Equations with a Small Parameter: Existence,Stability and Asymptotic Expansion

We consider a scalar delay differential equation with a small parameter, and employ Walthers method to obtain a result on the existence and stability of a slowly oscillatory periodic solution that represents a refinement of the estimate for the Lipschitz constant of a returning map. We also develop a matching method and obtain asymptotic expansions of the slowly oscillatory periodic solution and its minimal period.Dedicated to Professor Shui-Nee Chow on the occasion of his 60th birthdayAMS subject classifications: 34K15; 34K20; 34C25.     

弹塑性随机振动系统中恢复力数学模型的若干形式

本文基于弹塑性随机振动系统恢复力数学模型的统一形式，提出了能考虑刚度下降段和系统在滞变过程中强度退化的四种恢复力数学模型，为适应系统在多次强随机干扰下的反应分析需要，根据试验结果，提出了经受过强随机干扰的有损伤系统的恢复力模型，并建立了相应的数学表达式，最后针对钢筋砼框架结构在主余震作用下的弹塑性地震反应分析给出了具体算例。     

On the crack-tip stress singularity of interfacial cracks in transversely isotropic piezoelectric bimaterials

In this paper, characteristics of the interface crack-tip stress and electric displacement fields in transversely isotropic piezoelectric bimaterials are studied. The authors have proven, within the framework of the generalized Stroh formalism for piezoelectric bimaterials, that there is no coexistence of the parameters (oscillating) and κ (non-oscillating) in the interface crack-tip generalized stress field for all transversely isotropic piezoelectric bimaterials. This leads to the classification of piezoelectric bimaterials into one group that exhibits the oscillating property in the interface crack-tip generalized stress field and the other that does not. Fifteen (15) pair-combinations of six (6) piezoelectric materials PZT-4, PZT-5H, PZT-6B, PZT-7A, P-7, and BaTiO₃, which are commonly used in practice, are numerically analyzed in this study, and the results backup the above theoretical conclusions. Moreover, the associated eigenvectors for such material systems (with either =0 or κ=0) are also obtained numerically, and the result show that there still exist four linear independent associate eigenvectors for each bimaterial.     

Quantification of Ocular Biologically Effective UV Exposure for Different Rotation Angle Ranges Based on Data from a Manikin

Human outdoor activities are randomly orientated at different angles to the sun. To quantify the ocular UV and biologically effective UV (UVBE; i.e. the ocular UV irradiance exposure for photokeratitis (UVpker), photoconjunctivitis (UVpcon), and cataract (UVcat)) exposure for different rotation angle ranges, a rotating manikin was used to monitor the ocular UV exposure at different rotation angles in clear skies during July 2010 in Sanya, China. As a result, the ocular UV and UVBE irradiance was directly influenced by the rotation angle variations, primarily for the 120° rotation angle ranges facing the morning and afternoon sun when the solar elevation was lower than 60°; during these times, the UV and UVBE spectral irradiance decreased as the rotation angle increased. When compared to the 360° rotation angle ranges (which were considered to be the average exposure situation), the cumulative ocular UVBE for 60°, 120° and 180° rotation angle ranges were maximally 91% (UVcat), 94% (UVpker) and 121% (UVpcon); 71% (UVcat), 74% (UVpker) and 95% (UVpcon); 42%(UVcat), 45%(UVpker) and 55% (UVpcon) higher respectively. Meanwhile, the cumulative ocular UVBE for the 180° rotation angle ranges facing away from the sun were 46% (UVpker), 59% (UVpcon) and 45% (UVcat) lower.     

Fully integrated PDMS/SU-8/quartz microfluidic chip with a novel macroporous poly dimethylsiloxane (PDMS) membrane for isoelectric focusing of proteins using whole-channel imaging detection

A fully integrated polydimethylsiloxane (PDMS)/modified PDMS membrane/SU-8/quartz hybrid chip was developed for protein separation using isoelectric focusing (IEF) mechanism coupled with whole-channel imaging detection (WCID) method. This microfluidic chip integrates three components into one single chip: (i) modified PDMS membranes for separating electrolytes in the reservoirs from the sample in the microchannel and thus reducing pressure disturbance, (ii) SU-8 optical slit to block UV light (below 300?nm) outside the channel aiming to increase detection sensitivity, and (iii) injection and discharge capillaries for continuous operation. Integration of all these components on a single chip is challenging because it requires fabrication techniques for perfect bonding between different materials and is prone to leakage and blockage. This study has addressed all the challenges and presented a fully integrated chip, which is more robust with higher sensitivity than the previously developed IEF chips. This chip was tested by performing protein and pI marker separation. The separation results obtained in this chip were compared with that obtained in commercial cartridges. Side-by-side comparison validated the developed chip and fabrication techniques.     

脉冲不分流进样气相色谱-质谱法分析血浆中的10种镇静催眠药

采用脉冲不分流进样技术建立了血浆中10种镇静催眠药(巴比妥、异戊巴比妥、苯巴比妥、奥沙西泮、地西泮、硝西泮、氯硝西泮、艾司唑仑、阿普唑仑、三唑仑)的气相色谱-质谱(GC-MS)快速定性定量分析方法.血浆样品经0.1 mol/L 氢氧化钠溶液碱化后,用乙酸乙酯萃取;萃取液经氮气吹干,用乙酸乙酯溶解后进行GC-MS分析,所...     

A hybrid trust region algorithm for unconstrained optimization

This paper presents a hybrid trust region algorithm for unconstrained optimization problems. It can be regarded as a combination of ODE-based methods, line search and trust region techniques. A feature of the proposed method is that at each iteration, a system of linear equations is solved only once to obtain a trial step. Further, when the trial step is not accepted, the method performs an inexact line search along it instead of resolving a new linear system. Under reasonable assumptions, the algorithm is proven to be globally and superlinearly convergent. Numerical results are also reported that show the efficiency of this proposed method.     

Facile electrochemical synthesis of hexagonal Cu2O nanotube arrays and their application

Large-scale and highly oriented single-crystalline hexagonal Cu(2)O nanotube arrays have been successfully synthesized using a two-step solution approach, which involves the electrodeposition of oriented Cu(2)O nanorods and a subsequent dissolution technique along the c axis to form a tubular structure. Herein, NH(4)Cl was found to be an effectual additive, and it can successfully realize the dissolution process of Cu(2)O from nanorods to nanotubes. The dissolution mechanism of Cu(2)O from nanorods to nanotubes was illustrated in detail. These prepared Cu(2)O nanotube arrays were characterized by SEM, EDS, XRD, XPS, and TEM. The photoluminescence (PL) spectrum of Cu(2)O nanotube arrays was also measured, and it shows there is a greater fraction of copper or oxygen vacancies in these prepared Cu(2)O nanotubes. Finally, the applications of Cu(2)O nanotube arrays for gas sensors were investigated in this paper.