石墨型高能两电极气体开关

为大型激光装置能源模块研制了一种采用石墨电极的两电极气体开关,阐述了石墨应用于高能两电极气体开关的技术关键,对气体开关中气体间隙的最优结构进行了电场强度分析。参考美国国家点火装置(NIF)能源模块中ST-300气体开关的已知参数,对研制成功的石墨型两电极开关进行了电气特性试验,证明了石墨型气体开关能够实现峰值电流达300 kA以上,单次转移电荷量100 C以上,寿命超过1 000次,满足1.2 MJ大型激光装置能源模块的工程技术要求。     

An Unsupervised Video Stabilization Algorithm Based on Key Point Detection

In recent years, video stabilization has improved significantly in simple scenes, but is not as effective as it could be in complex scenes. In this study, we built an unsupervised video stabilization model. In order to improve the accurate distribution of key points in the full frame, a DNN-based key-point detector was introduced to generate rich key points and optimize the key points and the optical flow in the largest area of the untextured region. Furthermore, for complex scenes with moving foreground targets, we used a foreground and background separation-based approach to obtain unstable motion trajectories, which were then smoothed. For the generated frames, adaptive cropping was conducted to completely remove the black edges while maintaining the maximum detail of the original frame. The results of public benchmark tests showed that this method resulted in less visual distortion than current state-of-the-art video stabilization methods, while retaining greater detail in the original stable frames and completely removing black edges. It also outperformed current stabilization models in terms of both quantitative and operational speed.     

神光-Ⅲ主机装置MJ级能源系统研制现状

介绍了神光-Ⅲ主机装置能源系统的功能要求、组成结构和设计方法,以及关键单元器件的功能要求和设计方法。该系统是片状放大器系统的重要组成部分,由6个束组共108套最大储能为1.2 MJ的能源模块组成,总储能达到110 MJ（最大130 MJ）。每套模块产生一个脉宽610 s(10 %峰值)的电流脉冲,驱动10组、共20支氙灯,为片状放大器提供泵浦能量,峰值电流为0.25 MA。目前投入试运行的36套能源模块的各项电气性能指标满足设计要求,能确保片状放大器小信号增益系数达到5.0%/cm,为片状放大器提供足够的泵浦能量,满足激光器的能量需求。     

台阶爆破破碎度的分布规律

本文采用摄影方法在海州露天煤矿对台阶爆破破碎块度进行了测量。根据现场试验所获得的数据,通过多元曲线拟合处理,给出了二种岩石爆破破碎块度的分布规律。所得结论对控制和提高爆破破碎质量具有重要意义。     

铀酰与羧酸和肟基类配体相互作用的理论研究

深入了解各种功能基团与铀酰离子的络合行为有助于设计和开发高效海水提铀吸附剂. 本工作通过密度泛函理论(DFT)方法系统地研究了两种典型铀酰络合配体吡啶-2,6-二羧酸(H₂DPA)和戊二酰偕亚胺二肟(H₂A)与铀酰离子及碳酸根离子形成的配合物的结构、成键性质以及热力学稳定性. 研究结果表明, 所有配合物中, 配体与铀酰离子之间具有不同强度的共价相互作用. 由于H₂A配位时发生了质子重排, 而且配体的解离能较高, 使其更难与[UO₂(CO₃)₃]^4-发生取代反应, 因此H₂DPA配体是海水提铀中一种潜在的有效配体. 本工作的相关研究结果为海水提铀中高效吸附基团的设计和开发提供了理论线索.     

Improvement of boundary conditions for non-planar boundaries represented by polygons with an initial particle arrangement technique

The boundary conditions represented by polygons in moving particle semi-implicit (MPS) method (Koshizuka and Oka, Nuclear Science and Engineering, 1996 Koshizuka, S., and Y. Oka. 1996. “Moving-Particle Semi-Implicit Method for Fragmentation of Incompressible Fluid.” Nuclear Science and Engineering 123: 421–434.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]) have been widely used in the industry simulations since it can simply simulate complex geometry with high efficiency. However, the inaccurate particle number density near non-planar wall boundaries dramatically affects the accuracy of simulations. In this paper, we propose an initial boundary particle arrangement technique coupled with the wall weight function method (Zhang et al. Transaction of JSCES, 2015 Zhang, T.G., S. Koshizuka, K. Shibata, K. Murotani, and E. Ishii. 2015. “Improved Wall Weight Function With Polygon Boundary in Moving Particle Semi-Implicit Method.” Transaction of JSCES. No. 20150012. [Google Scholar]) to improve the particle number density near slopes and curved surfaces with boundary conditions represented by polygons in three dimensions. Two uniform grids are utilized in the proposed technique. The grid points in the first uniform grid are used to construct boundary particles, and the second uniform grid stores the same information as in the work by Zhang et al. The wall weight functions of the grid points in the second uniform grid are calculated by newly constructed boundary particles. The wall weight functions of the fluid particles are interpolated from the values stored on the grid points in the second uniform grid. Because boundary particles are located on the polygons, complex geometries can be accurately represented. The proposed method can dramatically improve the particle number density and maintain the high efficiency. The performance of the previously proposed wall weight function (Zhang et al.) with the boundary particle arrangement technique is verified in comparison with the wall weight function without boundary particle arrangement by investigating two example geometries. The simulations of a water tank with a wedge and a complex geometry show the general applicability of the boundary particle arrangement technique to complex geometries and demonstrate its improvement of the wall weight function near the slopes and curved surfaces.     

金属有机物化学气相沉积法生长Ga2（1-x）In2xO3薄膜的结构及光电性能研究

采用金属有机物化学气相沉积（MOCVD）法在蓝宝石（0001）衬底上制备出了Ga_2（1-x）In_2xO₃（x=01—09）薄膜,研究了薄膜的结构、电学和光学特性以及退火处理对薄膜性质的影响.测量结果表明：当In组分x=02时,样品为单斜β-Ga₂O₃结构;x=05的样品,薄膜呈现非晶结构,退火处理后薄膜结构得到明显的改善 关键词： 金属有机物化学气相沉积 2（1-x）In_2xO₃薄膜')" href="#">Ga_2（1-x）In_2xO₃薄膜 蓝宝石衬底 退火     

金属有机物化学气相沉积法生长Ga2(1-χ)In2χO3薄膜的结构及光电性能研究

采用金属有机物化学气相沉积(MOCVD)法在蓝宝石(0001)衬底上制备出了Ga2(1-χ)In2χO3(χ=0.1-0.9)薄膜,研究了薄膜的结构、电学和光学特性以及退火处理对薄膜性质的影响.测量结果表明:当In组分χ=0.2时,样品为单斜β-Ga2O3,结构;χ=0.5的样品,薄膜呈现非晶结构,退火处理后薄膜结构得到明显的改善,由非晶结构转变为具有(222)单一取向的立方In2O3结构;对于χ=0.8,薄膜为立方In2O3,结构,退火后薄膜的晶体质量得到提高.在可见光区薄膜本身的透过率均达到了85%以上,带隙宽度随样品中Ga含量的改变在3.76-4.43 eV之间变化,且经退火处理后带隙宽度明显增大.     

多路段元胞自动机交通流模型

在经典单路段元胞自动机交通流模型的基础上,将多个路段视为一个道路系统,提出并研究了多路段条件下的交通流问题.针对多路段道路的特点,通过引入车辆流入规则、路口随机慢化规则和路口车辆流入规则,控制车辆从上一路段流入下一路段.首先提出了"汽车池"的概念,来控制每一路口车辆的流入;然后通过路口随机慢化,来模拟路口对交通的影响;最后,当车辆离开时,依直行率进入下一路段,实现车流的继续流动.同时,通过数值模拟,仿真了不同条件下的交通情况,对重要参数进行了研究.结果表明,出现了混合流这一新的现象,拥堵地段与非拥堵地段间存在明显的界限.拥堵往往最先从路口开始,然后蔓延到整个路段.多路段道路还存在临界突变的特性.随着车辆流入概率的增大,路口对平均速度和车流密度的影响愈加明显.当流入概率超过一定阈值时,车辆缓慢地增加也会引起整体道路通行能力的迅速下降.     

微波辅助萃取-固相微萃取联用气相色谱-质谱法测定土壤中的扑草净

研究了微波辅助萃取-固相微萃取联用、气相色谱-质谱联用测定土壤中除草剂扑草净的分析方法。采用正交设计实验优化了萃取溶剂种类和体积、微波辐射时间和微波功率等微波辅助萃取条件;研究了SPME萃取涂层、搅拌速度、萃取时间和解吸时间等对萃取效率的影响。方法的检出限为0．01ng／g;线性范围为0．2—200μg／L。在优化的条件下测定了5和50ng/g的合成土壤样品,回收率分别为90．1％和91.6％;相对标准偏差分别为9．4％和8．8％(n=6)。本法综合了微波辅助萃取和固相微萃取的优点,操作简便．灵敏度高,特别适合于固体样品中痕量有机物的萃取分离。