双轴速率位置台全数字化控制系统实现

讨论了一种适用于双轴测试转台的全数字化控制系统结构。该系统采用了多单片机并行实现的主从分布式控制方法，不仅大大简化了系统硬件设计，提高了可靠性；而且其控制器完全由软件来实现，易于实现模拟电路难以实现的复杂的控制规律；同时也为在不改变硬件的前提下进一步扩展系统功能，改善系统的动、静特性提供了基础。实验表明，文中提出的全数字化控制系统结构完全能满足双轴测试转台的控制需要。     

一种复合材料梁架结构的强度可靠性分析

为解决分析复合材料框架式结构的强度可靠性问题 ,应用最小势能原理 ,设计推导了一种具有复杂剖面形状 ,考虑横向剪切 ,承受横向集中及分布载荷作用的层合梁单元。根据一具体水平梁架的实际情况 ,结合有限元处理程序中组装总体刚度矩阵的特点 ,较好地实现了层合梁之间的不完全简支连接。分析系统强度可靠性时 ,通过可调控的运行方式 ,有效解决了挑选失效模式与离散单元数目之间的关系 ,使系统可靠性的计算更合理     

隐式Newmark法分析波动问题精度的探讨

本文研究了用平均加速度的Newmark积分格式求解一维平面弹性波动问题的精度。由于平均加速度的Newmark积分格式没有振幅衰减、不产生数值阻尼,因此采用此法分析波动问题会产生较强的高频振荡,尤其是加速度的计算值误差甚大。本文对防护工程中常见的平台型荷载和升压三角形荷载作用下的波动问题,应用有限元分析的实例表明:采用有数值阻尼的Newmark积分格式是改进有限元求解波动问题的一个有效方法,可以大大地提高应力和加速度求解精度。文中推荐的有数值阻尼Newmark积分格式的积分参数(=0.9,=0.49)可供工程中土与结构动力分析时参考使用。     

The problems of nonlinear bending for orthotropic rectangular plate with four clamped edges

（黄家寅）（秦圣立）ＴＨＥＰＲＯＢＬＥＭＳＯＦＮＯＮＬＩＮＥＡＲＢＥＮＤＩＮＧＦＯＲＯＲＴＨＯＴＲＯＰＩＣＲＥＣＴＡＮＧＵＬＡＲＰＬＡＴＥＷＩＴＨＦＯＵＲＣＬＡＭＰＥＤＥＤＧＥＳ￥ＨｕａｎｇＪｉａｙｉｎ;ＱｉｎＳｈｅｎｇｌｉ（ＱｕｆｕＮｏｒｍａｌＵｎ...     

A theoretical model for electroelastic analysis in piezoelectric fibre push-out test

A theoretical model is presented to study the elastic deformation process and frictional sliding behavior in single piezoelectric fibre push-out tests. Based on the theoretical model and some necessary simplifications, stress and electric fields are obtained for push-out tests of a circular piezoelectric fibre embedded in an elastic matrix. Numerical results of a piezoelectric fibre/expoxy matrix system are presented to verify the proposed formulation. The study shows that there is a significant effect of the piezoelectric parameter and embedded fibre length on stress transfer, electric field distribution and load-displacement curve of the frictional sliding process. This study also indicates that the piezoelectric effect has a distinct influence on the mechanical behavior and properties of the interface in a fibre/matrix system.     

An investigation of meterial properties of non-homogeneous cylindrically orthotropic circular plates

It has been been reported that the reduced stiffness of non-homogeneous cylindricallyorthotrpic circular plate varing exponentially with radius r is obtained by using thebending theory of a simple beamThe aim of this paper is to verify the effect of radius on the materal properties According to the flat stress-strain relation the values of material properties E_r E_a and v_θr which are the functions of radius r are obtained.Compared with the experimentalvalues the analytical values of the material properties are in essential agreement withtem.     

有初内力的板的内共振

本文利用非线性时空有限方法和样条有限元技术对具有初内力的板的非线性频响特性进行了分析，计算了在不同初始内力下方板的大振幅自由振动、有阻尼强迫振动和矩形板的内共振。     

非均匀圆柱型正交各向异性圆板的弯曲

研究了非均匀圆柱型正交各向异性圆板在均布横向载荷作用下的弯曲问题，求得了折算刚度随半径按指数规律变化的非均匀圆柱型正交各向异性圆板弯曲问题的渐近解，给出了周边固支和简支条件下的渐近解．通过算例可以看出，这种非均匀性对圆板中心挠度的影响是显著的     

任意外型薄板非线性后屈曲问题的边界元解

本文就薄板后屈曲问题建立一组新型的边界元计算公式，用这组公式求解能方便处理各种边界问题，另外文中将面内应力分解成基本部份和附加部份，并利用微分算子分解理论导得了挠度的一个不同形式的基本解，由于计算公式中，实现了面内位移和挠度的解耦，从而使迭代过程得到简化，文末还对圆板后屈曲路径进行了计算，得到了满意的结果。     

Application of faraday's effect in static and dynamic holographic photoelasticity

The basic principle of applying Faraday's effect to achieve the separation of fringes in static and dynamic holographic photoelasticity, and a study and application of Faraday's light rotator are described in this paper. It is proposed that Faraday's light rotator be used for automating photoelastic instrumentation for measuring isoclinics and the decimal orders of isochromatic fringes.