K-shell ionization cross section of aluminium induced by low-energy highly charged argon ions

Al K-shell X-ray yields are measured with highly charged Ar^q+ ions (q=12–16) bombarding against aluminium. The energy range of the Ar ions is from 180 to 380 keV. K-shell ionization cross sections of aluminium are also obtained from the yields data. The experimental data is explained within the framework of 2pπ -2pσ rotational coupling. When Ar ions with 2p-shell vacancies are incident on aluminium, the vacancies begin to reduce. Meanwhile, collisions against Al atoms lead to the production of new 2p-shell vacancies of Ar ions. These Ar 2p-shell vacancies will transfer to the 1s orbit of an Al atom via 2pπ-2pσ rotational coupling leading to the emission of a K-shell X-ray of aluminiun. A model is constructed based on the base of the above physical scenario. The calculation results of the model are in agreement with the experimental results.     

Enhanced ferroelectric properties of (Pb0.90La0.10)Ti0.975O3 multilayered thin films prepared by RF magnetron sputtering

The (Pb_0.90La_0.10)Ti_0.975O₃/PbTiO₃ (PLT/PT), PbTiO₃/(Pb_0.90La_0.10)Ti_0.975O₃/PbTiO₃ (PT/PLT/PT) multilayered thin films with a PbO_x buffer layer were in situ deposited by RF magnetron sputtering at the substrate temperature of 600 °C. With this method, highly (1 0 0)-oriented PLT/PT and PT/PLT/PT multilayered thin films were obtained. The PbO_x buffer layer leads to the (1 0 0) orientation of the films. The dielectric, ferroelectric and pyroelectric properties of the PLT multilayered thin films were investigated. It is found that highly (1 0 0)-oriented PT/PLT/PT multilayered thin films possess higher remnant polarization 2P_r (44.1 μC/cm²) and better pyroelectric coefficient at room temperature p (p = 2.425 × 10⁻⁸ C/cm² K) than these of PLT and PLT/PT thin films. These results indicate that the design of the PT/PLT/PT multilayered thin films with a PbO_x buffer layer should be an effective way to enhance the dielectric, ferroelectric and pyroelectric properties. The mechanism of the enhanced ferroelectric properties was also discussed.     

Threshold temperature of thermal entanglement in an XXZ ferromagnetic chain

Pairwise thermal entanglement of an XXZ ferromagnetic chain with a uniform magnetic field is investigated by using the entanglement measure of negativity. The effects of spin, number of sites, anisotropic parameter, and magnetic field on the threshold temperature are discussed respectively.     

Photoinduced Resistance Change in an Oxygen-Deficient La 0.9 Sr 0.1 MnO 3-δ Thin Film

Photoinduced resistance change （ △ R/R） in an oxygen-deficient La0.9Sr0.1MnO3-δ thin film is studied. At room temperature, the resistance change of about 30% and response time of about 75 ns are observed under the illumination with a 532nm laser pulse of 7ns and light power of 750mW. It is also found that △ R/R changes with the light power. The phenomena are explained in terms of the photoinduced hole carriers and localized insulator-to-metal transition, which may have potential applications in optoelectronic devices.     

Room-Temperature Ferromagnetism of Co-Doped CeO2 Thin Films on Si（111） substrates

Using Co2O3 as the Co source, doped cerium oxide thin films with the composition of Ce0.97C00.03O2-δ （CCO） are deposited on Si（111） and glass substrates by pulse laser deposition technique. X-ray diffraction reveals that CCO films with （111） preferential orientation are grown on Si, while the fihn on glass is polycrystalline with nanocrystal. X-ray photoelectron spectroscopy shows that the （Jo displaces the （;e atom and exists in high spin state rather than low spin state, which contributes to the room-temperature ferromagnetism confirmed by vibration sample magnetometer. I~ilms on Si and glass are different in ferromagnetism, which is believed to be induced by different film microstructures. Based on these results, the possible ferromagnetism in this insulating film is discussed. Anyway, successful fabrication of CCO films with room-temperature ferromagnetism on Si substrates is of great importance in both technological and theoretical aspects.     

A new thermo‐responsive block copolymer with tunable upper critical solution temperature and lower critical solution temperature in the alcohol/water mixture

The multi‐thermo‐responsive block copolymer of poly[2‐(2‐methoxyethoxy)ethyl methacrylate]‐block‐poly[N‐(4‐vinylbenzyl)‐N,N‐diethylamine] (PMEO₂MA‐b‐PVEA) displaying phase transition at both the lower critical solution temperature (LCST) and the upper critical solution temperature (UCST) in the alcohol/water mixture is synthesized by reversible addition‐fragmentation chain transfer polymerization. The poly[2‐(2‐methoxyethoxy)ethyl methacrylate] (PMEO₂MA) block exhibits the UCST phase transition in alcohol and the LCST phase transition in water, while the poly[N‐(4‐vinylbenzyl)‐N,N‐diethylamine] (PVEA) block shows the UCST phase transition in isopropanol and the LCST phase transition in the alcohol/water mixture. Both the polymer molecular weight and the co‐solvent/nonsolvent exert great influence on the LCST or UCST of the block copolymer. By adjusting the solvent character including the water content and the temperature, the block copolymer undergoes multiphase transition at LCST or UCST, and various block copolymer morphologies including inverted micelles, core‐corona micelles, and corona‐collapsed micelles are prepared. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4399–4412     

Echelle dif fraction grating based high-resolution spectrometer-on-chip on SiON waveguide platform

An echelle diffraction grating based high-resolution spectrometer-on-chip on silicon oxynitride (SiON) waveguide platform operated at a wavelength range of 850 nm is demonstrated. The chip comprises 120 output waveguides with 0.25-nm wavelength channel spacing and has a size of only 11 × 6 (mm). The experimental results show that the insertion loss is-14 dB, the measured adjacent channel crosstalk is less than -25 dB, the 3 dB channel bandwidth is < 0.1 nm, and the channel non-uniformity is 3 dB for 56 channels with a wavelength ranging from 838 to 852 nm.     

A convergence of photo‐bergman cyclization and intramolecular chain collapse towards polymeric nanoparticles

Employing enediynes as crosslinking precursors, a novel yet efficient strategy, namely photo‐triggered Bergman cyclization, was integrated with intramolecular chain collapse to yield polymeric nanoparticles with the size regime below 20 nm. Enediyne motif was designed delicately to possess a high photo‐reactivity, with the double bond locked in a methyl benzoate ring while triple bonds substituted with phenyls. Single electron transfer‐living radical polymerization was conducted to provide linear acrylate copolymers with controlled molecular weights and narrow polydispersities. Poly(butylarylate‐co‐ 5 ) went through UV‐irradiation with a concurrent Bergman cyclization, resulting in well‐defined ultrafine polymeric nanoparticles. Results from NMR, Raman scattering, photoluminescence and UV‐vis spectra corroborated the presence of conjugative structures in the polymeric nanoparticles, indicating the occurrence of photo‐induced Bergman cyclization. A series of other acrylate‐based nanoparticles were investigated to confirm the applicability of such a unique strategy in thermal sensitive but UV‐stable polymeric structures, making photo‐Bergman cyclization a promising tool towards polymeric nanoparticles. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011