U(SMes*)n, (n = 3, 4) and Ln(SMes*)3 (Ln = La, Ce, Pr, Nd): lanthanide(III)/actinide(III) differentiation in agostic interactions and an unprecedented eta3 ligation mode of the arylthiolate ligand, from X-ray diffraction and DFT analysis

Reaction of U(NEt(2))(4) with HS-2,4,6-(t)Bu(3)C(6)H(2) (HSMes) gave U(SMes)(3)(NEt(2))(py) (1), whereas similar treatment of U[N(SiMe(3))SiMe(2)CH(2)][N(SiMe(3))(2)](2) afforded U(SMes)[N(SiMe(3))(2)](3) (2) and U(SMes)(3)[N(SiMe(3))(2)]. The first neutral homoleptic uranium(IV) thiolate to have been crystallographically characterized, U(SMes)(4) (4), was isolated from the reaction of U(BH(4))(4) and KSMes. The first homoleptic thiolate complex of uranium(III), U(SMes)(3) (5), was synthesized by protonolysis of U[N(SiMe(3))(2)](3) with HSMes in cyclohexane. The crystal structure of 5 exhibits the novel eta(3) ligation mode for the arylthiolate ligand. Comparison of the crystal structure of 5 with those of the isomorphous lanthanide congeners Ln(SMes)(3) (Ln = La, Ce, Pr, and Nd) indicates that the U-S, U-C(ipso)(), and U-C(ortho)() bond lengths are shorter than the corresponding ones in the 4f-element analogues, when taking into account the variation in the ionic radii of the metals. The distance between the uranium and the carbon atoms involved in the U...H-C epsilon agostic interaction of each thiolate ligand is shorter, by approximately 0.05 A, than that expected from a purely ionic bonding model. The lanthanide(III)/actinide(III) differentiation was analyzed by density functional theory (DFT). The nature of the M-S bond is shown to be ionic strongly polarized at the sulfur for M = U and iono-covalent (i.e. strongly ionic with low orbital interaction), for M = Ln. The strength of the U...H-C epsilon agostic interaction is proposed to be controlled by the maximization of the interaction between U(+) and S(-) under steric constraints. The eta(3) ligation mode of the arylthiolate ligand is also obtained from DFT.     

Effects of Cu2−xS phase removal on surface potential of Cu2ZnSnS4 thin-films grown by electroplating

Cu₂ZnSnS₄ (CZTS) has an optical band gap of 1.4–1.5 eV, which is similar to that of Cu(In,Ga)Se₂ (CIGS), and a high absorption coefficient (>10⁴ cm⁻¹) in the visible light region. In previous reports, CIGS thin-film solar cells have been shown to improve the performance of the device since the secondary phase is removed by Potassium cyanide (KCN) etching treatment. Therefore, in this study we applied a KCN etching treatment on CZTS and measured the effects. We confirmed the removal of Cu_2−xS via Kelvin probe force microscopy (KPFM) and Raman scattering spectroscopy. The effects of the experiment indicate that we can define with precision the location of the secondary phases, and therefore the control of the secondary phases will be easier and more efficient. Such capabilities could improve the solar cell performance of CZTS thin-films.     

Synthesis and NMR Spectroscopic Characteristics of a Series of Hydrazide‐Hydrazones Containing Furoxan Ring Derived from Isoeugenoxyacetic Acid

A novel hydrazide, 2‐methoxy‐4‐(3‐methyfuroxan‐4‐yl)‐5‐nitrophenoxyacetylhydrazine, was prepared from isoeugenoxyacetic acid. The hydrazide was condensed with aromatic aldehydes to give a series of 20 hydrazide‐hydrazones incorporating the furoxan ring. The structure of obtained compounds was determined by analytical and spectral data. It was demonstrated that the two sets of resonance signals in the ¹H‐NMR and ¹³C‐NMR spectra of the examined hydrazide‐hydrazones are caused by E_N–C(O) and Z_N–C(O) conformers. The energy barriers for the conformation exchange were determined by ¹H‐NMR‐measurement at various temperatures. Among seven tested hydrazide‐hydrazones, four compounds exhibit inhibition activities in vitro on human epidermis carcinoma (KB‐cell) with IC₅₀ = 47, 68, 79, and 103 μg/mL.     

Bis(crown ether) and Azobenzocrown Derivatives of Calix[4]arene. A Review of Structural Information from Crystallographic and Modelling Studies

The association within one molecule ofcalix[4]arene and crown ether moieties leads toligands with new complexing properties. In particular,calix[4]arene bis(crown-6) and some of itsderivatives have been shown to be highly selectiveextractants for caesium ions. This review presents thebackground of the study and the results of crystalstructure determinations and molecular modellingcalculations performed during the investigation of twomolecular families, the bis(crown ether) and theazobenzocrown derivatives of calix[4]arene.     

A 1:1:1 chloro­form/tetra­hydro­furan solvate of p-tert-butyl­tetra­homo­dioxa­calix­[4]­arene

The title compound, 7,13,21,27-tetra-tert-butyl-3,17-di­oxa­penta­cyclo­[23.3.1.1^5,9.1^11,15.1^9,23]ditriaconta-1(29),­5,­7,­9(30),11(31),­12,­14,­19(32),­20,­22,­25,­27-do­deca­ene-29,­30,­31,­32-tetraol, crystallizes as a solvate with one mol­ecule of chloro­form and one mol­ecule of tetra­hydro­furan, C₄₆H₆₀O₆·CHCl₃·C₄H₈O. The calixarene assumes a cone-like conformation stabilized by intramolecular hydrogen bonds involving both phenolic and ether O atoms. The two solvent mol­ecules are located in each of the two half-cone cavities of the calixarene.     

Improvement of Biological Effects of Root-Filling Materials for Primary Teeth by Incorporating Sodium Iodide

Therapeutic iodoform (CHI₃) is commonly used as a root-filling material for primary teeth; however, the side effects of iodoform-containing materials, including early root resorption, have been reported. To overcome this problem, a water-soluble iodide (NaI)-incorporated root-filling material was developed. Calcium hydroxide, silicone oil, and NaI were incorporated in different weight proportions (30:30:X), and the resulting material was denoted DX (D5~D30), indicating the NaI content. As a control, iodoform instead of NaI was incorporated at a ratio of 30:30:30, and the material was denoted I30. The physicochemical (flow, film thickness, radiopacity, viscosity, water absorption, solubility, and ion releases) and biological (cytotoxicity, TRAP, ARS, and analysis of osteoclastic markers) properties were determined. The amount of iodine, sodium, and calcium ion releases and the pH were higher in D30 than I30, and the highest level of unknown extracted molecules was detected in I30. In the cell viability test, all groups except 100% D30 showed no cytotoxicity. In the 50% nontoxic extract, D30 showed decreased osteoclast formation compared with I30. In summary, NaI-incorporated materials showed adequate physicochemical properties and low osteoclast formation compared to their iodoform-counterpart. Thus, NaI-incorporated materials may be used as a substitute for iodoform-counterparts in root-filling materials after further (pre)clinical investigation.     

Biosensors Based on Ion-Sensitive Field-Effect Transistors for HLA and MICA Antibody Detection in Kidney Transplantation

This work demonstrates the ability of the Ion-Sensitive Field-Effect Transistor (ISFET)-based immunosensor to detect antibodies against the human leukocyte antigen (HLA) and the major histocompatibility complex class-I-related chain A (MICA). The sensing membrane of the ISFET devices was modified and functionalized using an APTES-GA strategy. Surface properties, including wettability, surface thickness, and surface topology, were assessed in each module of the modification process. The optimal concentrations of HLA and MICA proteins for the immobilization were 10 and 50 μg/mL. The dose-response curve showed a detection range of 1.98–40 µg/mL for anti-HLA and 5.17–40 µg/mL for anti-MICA. The analytical precision (%CV) was found to be 10.69% and 8.92% for anti-HLA and -MICA, respectively. Moreover, the electrical signal obtained from the irrelevant antibody was considerably different from that of the specific antibodies, indicating the specific binding of the relevant antibodies without noise interference. The sensitivity and specificity in the experimental setting were established for both antibodies (anti-HLA: sensitivity = 80.00%, specificity = 86.36%; anti-MICA: sensitivity = 86.67%, specificity = 88.89%). Our data reveal the potential of applying the ISFET-based immunosensor to the detection of relevant anti-HLA and -MICA antibodies, especially in the field of kidney transplantation.     

Homoleptic tris(dithiolene) and tetrakis(dithiolene) complexes of uranium(IV)

Reaction of UCl4 with 3 or 4 mol equiv of Na2dddt (dddt = 5,6-dihydro-1,4-dithiine-2,3-dithiolate) in THF afforded the first example of a tetrakis(dithiolene) metal compound, [Na4(THF)8U(dddt)4](infinity) (1). The red crystals of 1 are composed of infinite zigzag chains in which Na2(micro-THF)3 fragments ensure the linking of Na2(THF)5U(dddt)4 moieties; the uranium atom is in a dodecahedral environment of eight sulfur atoms. Treatment of UCl4 with 3 mol equiv of Na2dddt in pyridine gave a mixture of tris- and tetrakis(dithiolene) compounds. After addition of 18c6 (18-crown-6), only the tris(dithiolene) complex was obtained and crystallized as orange crystals of [Na(18c6)(py)2]2[U(dddt)3].2py (2.2py) in which the isolated [U(dddt)3]2- anion adopts a slightly distorted trigonal prismatic configuration. A few red crystals of the unsolvated complex 2 and the trinuclear anionic compound [Na(18c6)(py)2]3[Na{U(dddt)3}2] (3) were also obtained along with orange crystals of 2.2py. All the tris(dithiolene) compounds exhibit large folding of the dddt ligand and significant interaction between the C=C double bond and the metal center.     

Structure and magnetism of the first strictly dinuclear compound containing paramagnetic 3d and 5f metal ions. Major influence of the Cu(II) ion coordination on the exchange Cu(II)-U(IV) interaction

The dinuclear compound [CuL2(py)U(acac)2] has been synthesized by treating [Cu(H2L2)] with U(acac)4 (L2 = N,N'-bis(3-hydroxysalicylidene)-2-methyl-1,2-propanediamine) and shows the antiferromagnetic Cu-U interaction; the distinct magnetic behaviour of the trinuclear complexes [(CuL2)2U] (antiferromagnetic) and [[CuL1(py)]U[CuL1]] (ferromagnetic) revealed the major influence of the Cu(II) ion coordination on the exchange interaction (L1 = N,N'-bis(3-hydroxysalicylidene)-2,2-dimethyl-1,3-propanediamine).     

Spin crossover of ferric complexes with catecholate derivatives. Single-crystal X-ray structure, magnetic and Mössbauer investigations

Complexes of general formula [(TPA)Fe(R-Cat)]X.nS were synthesised with different catecholate derivatives and anions (TPA = tris(2-pyridylmethyl)amine, R-Cat2- = 4,5-(NO2)2-Cat2- denoted DNC(2-); 3,4,5,6-Cl4-Cat2- denoted TCC2-; 3-OMe-Cat(2-); 4-Me-Cat(2-) and X = BPh4-; NO3-; PF6-; ClO4-; S = solvent molecule). Their magnetic behaviours in the solid state show a general feature along the series, viz., the occurrence of a thermally-induced spin crossover process. The transition curves are continuous with transition temperatures ranging from ca. 84 to 257 K. The crystal structures of [(TPA)Fe(DNC)]X (X = PF6-; BPh4-) and [(TPA)Fe(TCC)]X.nS (X = PF6-; NO3- and n= 1, S = H2O; ClO4- and n= 1, S = H2O; BPh4- and n= 1, S = C3H6O) were solved at 100 (or 123 K) and 293 K. For those two systems, the characteristics of the [FeN(4)O(2)] coordination core and those of the dioxolene ligands appear to be consistent with a prevailing Fe(III)-catecholate formulation. This feature is in contrast with the large quantum mixing between Fe(III)-catecholate and Fe(II)-semiquinonate forms recently observed with the more electron donating simple catecholate dianion. The thermal spin crossover process is accompanied by significant changes of the molecular structures as shown by the average variation of the metal-ligand bond distances which can be extrapolated for a complete spin conversion from ca. 0.123 to 0.156 A. The different space groups were retained in the low- and high-temperature phases.