Oxidizing Elemental Platinum with Oleum under Harsh Conditions: The Unique Tris(disulfato)platinate(IV) [Pt(S2O7)3]2− Anion

For the first time, direct oxidation of elemental platinum by a mineral acid to its tetravalent state was observed in course of the reaction of platinum with oleum (65 % SO₃) in the presence of barium carbonate. The reaction has been carried out in torch‐sealed glass ampoules at 160 °C and gave yellow single crystals of Ba[Pt(S₂O₇)₃](H₂SO₄)_0.5(H₂S₂O₇)_0.5 (triclinic, P$\bar 1$ , Z=2, a=992.05(2), b=1069.07(3), c=1114.22(3) pm, α=69.49(7), β=72.96(2), γ=72.93(1)°, V=1033.95(5) ų). The structure of Ba[Pt(S₂O₇)₃](H₂SO₄)_0.5(H₂S₂O₇)_0.5 exhibits the unique tris‐(disulfato)‐platinate anion [Pt(S₂O₇)₃]^2? with three chelating disulfate groups coordinated to the platinum atom. Charge balance is achieved by the Ba²⁺ ions, which are coordinated by (S₂O₇)^2? groups from the platinate complex and by disordered sulfuric acids and disulfuric acid molecules. Thermal decomposition of the bulk material revealed elemental platinum and barium sulfate as decomposition residual.     

Size Matters! On the Way to Ionic Liquid Systems without Ion Pairing

Several, partly new, ionic liquids (ILs) containing imidazolium and ammonium cations as well as the medium‐sized [NTf₂]^? (0.230 nm³; Tf=CF₃SO₃^?) and the large [Al(hfip)₄]^? (0.581 nm³; hfip=OC(H)(CF₃)₂) anions were synthesized and characterized. Their temperature‐dependent viscosities and conductivities between 25 and 80 °C showed typical Vogel–Fulcher–Tammann (VFT) behavior. Ion‐specific self‐diffusion constants were measured at room temperature by pulsed‐gradient stimulated‐echo (PGSTE) NMR experiments. In general, self‐diffusion constants of both cations and anions in [Al(hfip)₄]^?‐based ILs were higher than in [NTf₂]^?‐based ILs. Ionicities were calculated from self‐diffusion constants and measured bulk conductivities, and showed that [Al(hfip)₄]^?‐based ILs yield higher ionicities than their [NTf₂]^? analogues, the former of which reach values of virtually 100 % in some cases.From these observations it was concluded that [Al(hfip)₄]^?‐based ILs come close to systems without any interactions, and this hypothesis is underlined with a Hirshfeld analysis. Additionally, a robust, modified Marcus theory quantitatively accounted for the differences between the two anions and yielded a minimum of the activation energy for ion movement at an anion diameter of slightly greater than 1 nm, which fits almost perfectly the size of [Al(hfip)₄]^?. Shallow Coulomb potential wells are responsible for the high mobility of ILs with such anions.     

Synthesis of Oxacyclic Scaffolds via Dual Ruthenium Hydride/Brønsted Acid‐Catalyzed Isomerization/Cyclization of Allylic Ethers

A ruthenium hydride/Brønsted acid‐catalyzed tandem sequence is reported for the synthesis of 1,3,4,9‐tetrahydropyrano[3,4‐b]indoles (THPIs) and related oxacyclic scaffolds. The process was designed on the premise that readily available allylic ethers would undergo sequential isomerization, first to enol ethers (Ru catalysis), then to oxocarbenium ions (Brønsted acid catalysis) amenable to endo cyclization with tethered nucleophiles. This methodology provides not only an attractive alternative to the traditional oxa‐Pictet–Spengler reaction for the synthesis of THPIs, but also convenient access to THPI congeners and other important oxacycles such as acetals.     

Improving Site‐Directed RNA Editing In Vitro and in Cell Culture by Chemical Modification of the GuideRNA

Adenosine‐to‐inosine deamination can be re‐addressed to user‐defined mRNAs by applying phosphothioate/2′‐methoxy‐modified guideRNAs. Dense chemical modification of the guideRNA clearly improves performance of the covalent conjugates inside the living cell. Furthermore, careful positioning of a few modifications controls editing selectivity in vitro and was exploited for the challenging repair of the Factor 5 Leiden missense mutation.     

On-Surface Synthesis of Cumulene-Containing Polymers via Two-Step Dehalogenative Homocoupling of Dibromomethylene-Functionalized Tribenzoazulene

Cumulene compounds are notoriously difficult to prepare and study because their reactivity increases dramatically with the increasing number of consecutive double bonds. In this respect, the emerging field of on-surface synthesis provides exceptional opportunities because it relies on reactions on clean metal substrates under well-controlled ultrahigh-vacuum conditions. Here we report the on-surface synthesis of a polymer linked by cumulene-like bonds on a Au(111) surface via sequential thermally activated dehalogenative C−C coupling of a tribenzoazulene precursor equipped with two dibromomethylene groups. The structure and electronic properties of the resulting polymer with cumulene-like pentagon–pentagon and heptagon–heptagon connections have been investigated by means of scanning probe microscopy and spectroscopy methods and X-ray photoelectron spectroscopy, complemented by density functional theory calculations. Our results provide perspectives for the on-surface synthesis of cumulene-containing compounds, as well as protocols relevant to the stepwise fabrication of carbon–carbon bonds on surfaces.     

Environmentally Benign Solution-Based Procedure for the Fabrication of Metal Oxide Coatings on Metallic Pigments

Aluminum pigments were coated with Fe₂O₃ and CuO by solution-based thermal decomposition of the urea nitrate compounds hexakisureairon(III)nitrate and tetrakisureacopper(II)nitrate. The deposition process was optimized to obtain homogeneously coated aluminum pigments. The growth of the surface coatings was controlled by investigation with scanning electron microscopy, energy dispersive X-ray spectroscopy and static light scattering as well as infrared, X-ray diffraction and thermogravimetric analysis. The iron precursor showed an incomplete decomposition in solution, incorporating traces of urea molecules inside the coatings while the copper precursor showed complete dissociation accompanied by in situ formation of amine complexes. The amount of organic residues resulting from ligand fragments in the final oxide coatings could be reduced to 22 % for the iron oxide and 12 % for the copper oxide by further temperature treatment in solution (259 °C). Colorimetric investigations of the obtained pigments revealed an excellent hiding power, outperforming the pigments used in current state-of-the-art formulations.     

On‐Surface Synthesis of Cumulene‐Containing Polymers via Two‐Step Dehalogenative Homocoupling of Dibromomethylene‐Functionalized Tribenzoazulene

Cumulene compounds are notoriously difficult to prepare and study because their reactivity increases dramatically with the increasing number of consecutive double bonds. In this respect, the emerging field of on‐surface synthesis provides exceptional opportunities because it relies on reactions on clean metal substrates under well‐controlled ultrahigh‐vacuum conditions. Here we report the on‐surface synthesis of a polymer linked by cumulene‐like bonds on a Au(111) surface via sequential thermally activated dehalogenative C?C coupling of a tribenzoazulene precursor equipped with two dibromomethylene groups. The structure and electronic properties of the resulting polymer with cumulene‐like pentagon–pentagon and heptagon–heptagon connections have been investigated by means of scanning probe microscopy and spectroscopy methods and X‐ray photoelectron spectroscopy, complemented by density functional theory calculations. Our results provide perspectives for the on‐surface synthesis of cumulene‐containing compounds, as well as protocols relevant to the stepwise fabrication of carbon–carbon bonds on surfaces.     

Photochemical Deracemization of Allenes and Subsequent Chirality Transfer

Trisubstituted allenes with a 3‐(1′‐alkenylidene)‐pyrrolidin‐2‐one motif were successfully deracemized (13 examples, 86–98 % ee) employing visible light (λ=420 nm) and a chiral triplet sensitizer as the catalyst (2.5 mol %). The photocatalyst likely operates by selective recognition of one allene enantiomer via hydrogen bonds and by a triplet‐sensitized racemization process. Even a tetrasubstituted allene (45 % ee) and a seven‐membered 3‐(1′‐alkenylidene)‐azepan‐2‐one (62 % ee) could be enantiomerically enriched under the chosen conditions. It was shown that the axial chirality of the allenes can be converted into point chirality by a Diels–Alder (94–97 % ee) or a bromination reaction (91 % ee). Ring opening of the five‐membered pyrrolidin‐2‐one was achieved without significantly compromising the integrity of the chirality axis (92 % ee).     

Enantioselective crossed intramolecular [2+2] photocycloaddition reactions mediated by a chiral chelating Lewis acid

In intramolecular [2+2] photocycloaddition reactions, the two tethered olefins can approach each other in a straight or in a crossed fashion. Despite the fact that the latter reaction mode leads to intriguing, otherwise inaccessible bridged skeletons, there has so far not been any enantioselective variants thereof. This study concerned the crossed [2+2]-photocycloaddition of 2-(alkenyloxy)cyclohex-2-enones to bridged cyclobutanes. It was found that the reaction could be performed with high enantioselectivity (80–94% ee) under visible light conditions when employing a chiral rhodium Lewis acid as a catalyst (2 mol%).

An enantioselective crossed [2+2] photocycloaddition is presented which proceeds under visible light irradiation in the presence of a chiral Lewis acidic metal complex. Chelation of two oxygen atoms to the metal centre accounts for the observed enantioface differentiation.     

C=X π-Systeme

Im Rahmen des Graduiertenkollegs “Hochreaktive Mehrfachbindungssysteme” hatten G. Erker und J. Grobe vom 16. bis 18. November 1994 schon zum zweiten Mal nach Münster eingeladen. “Organic and Inorganic Chemistry of Reactive C=X π-Systems” waren diesmal das Thema.