Synthesis, characterization, and surface properties of iron-doped boehmite nanofibers

Iron-doped boehmite nanofibers with varying iron contents have been prepared at low temperatures using hydrothermal treatment in the presence of poly(ethylene oxide) surfactant. The resulting nanofibers were characterized by transmission electron microscopy (TEM), X-ray diffraction, energy-dispersive X-ray analysis, and N2 adsorption. TEM images showed that the resulting nanostructures are predominantly nanofibers when the doped iron content is less than 5% (mol/mol); in contrast, nanosheets were formed when iron doping was above 4%. Nanotubes instead of nanofibers and iron-rich particles were observed in samples with 20% added iron. A detailed characterization and discussion on the iron-doped nanofibers is presented.     

Bent and generalized bent Boolean functions

In this paper, we investigate the properties of generalized bent functions defined on ${\mathbb{Z}_2^n}$ with values in ${\mathbb{Z}_q}$ , where q ≥ 2 is any positive integer. We characterize the class of generalized bent functions symmetric with respect to two variables, provide analogues of Maiorana–McFarland type bent functions and Dillon’s functions in the generalized set up. A class of bent functions called generalized spreads is introduced and we show that it contains all Dillon type generalized bent functions and Maiorana–McFarland type generalized bent functions. Thus, unification of two different types of generalized bent functions is achieved. The crosscorrelation spectrum of generalized Dillon type bent functions is also characterized. We further characterize generalized bent Boolean functions defined on ${\mathbb{Z}_2^n}$ with values in ${\mathbb{Z}_4}$ and ${\mathbb{Z}_8}$ . Moreover, we propose several constructions of such generalized bent functions for both n even and n odd.     

Ultimate tensile properties of elastomers. VI. Strength and extensibility of a styrene–butadiene rubber vulcanizate in equal biaxial tension

The ultimate properties of an unfilled styrene-butadiene rubber vulcanizate in equal biaxial tension were determined by inflating a circular membrane into a bubble. Tests were made at several extension rates (evaluated at the pole) from about 0.15 to 4 min^?1 and at temperatures from ?43 to 90°C. The stress in the vicinity of the pole when rupture occurred was evaluated from the pressure, the radius of curvature, and the extension ratio λ, the latter two quantities being obtained from photographic data. Below 70°C, the ultimate extension ratio λ_b is approximately 5.2 and is essentially independent of extension rate and temperature, in striking contrast to the behavior in simple and constrained biaxial tension (pure shear). Likewise, the rupture stress is manyfold greater than in either simple or constrained biaxial tension. From the extremum points of failure envelopes, the maximum extension ratio (λ_b)_max in equal biaxial tension is 5.7 and in simple tension is 7.2. An examination of ruptured membranes showed that, except at 70 and 90°C, rupture began away from the pole in a region where the stress state is unequal biaxial tension. Hence, values of the ultimate properties in truly equal biaxial tension are no doubt somewhat greater than those obtained from the membrane tests. However, it is shown that (λ_b)_max in truly equal biaxial tension must be lower than that in simple tension by at least 10%. A consideration of rupture data in simple, constrained biaxial, and equal biaxial tension leads to the conclusion that no simple failure criterion is applicable for interrelating data obtained under the several states of combined stress. The rupture patterns and factors that affect the site of rupture initiation and the mode of crack growth are also discussed.     

Pyrolytic LCVD of fibers: A theoretical description

The pyrolytic LCVD (Laser-induced Chemical Vapor Deposition) of fibers is studied theoretically. The shape of fibers and the temperature distribution are calculated self-consistently on the basis of a one-dimensional model which takes into account changes of the radius along the fiber. The influence of different parameters on the fiber radius and the temperature is discussed. The parameters investigated include the laser power and spot size, the activation energy of the deposition reaction, diffusion limitations in the gas phase, and temperature dependences of the heat conductivities of the deposit and the gas. The results are applied to the pyrolytic growth of Si fibers from SiH₄ + H₂.     

The reaction of trifluoromethanesulphonicanhydride with phosphoryl compounds

Hexamethylphosphortriamide and triphenylphosphine oxide react with trifluoromethanesulphonic anhydride to give diphosphonium salts.     

Fungal extractives—IV: Structure of a novel sesquiterpene dialdehyde from Lactarius by spectroscopic methods

The complete structure of a sesquiterpene dialdehyde (“velleral”), isolated from Lactarius vellereus and L. pergamenus, has been elucidated by means of IR, UV, ¹³C-NMR spectroscopy, NOE measurements and computer simulation of the ¹H-NMR spectrum.     

Multichannel flash spectroscopy of the reaction centers of wild-type and mutant Rhodobacter sphaeroides: bacteriochlorophyllB-mediated interaction between the carotenoid triplet and the special pair

Multichannel flash spectroscopy (with microsecond time resolution) has been applied to carotenoid (Car)-containing and Car-less reaction centers (RC) of Rhodobacter sphaeroides with a view to investigate the interaction between the Car and its neighboring pigments at room temperature. Under neutral redox potential conditions, where the primary quinone acceptor (QA) is oxidized, the light-induced spectral changes in the 350-1000 nm region are attributed to the photochemical oxidation of the special pair (denoted here as P870), the generation of P870(+)QA(-), and the attendant electrochromism of adjacent chromophores. A bathochromic shift of <1 nm in the visible absorption region of Car reveals the sensitivity of Car to the P870 photooxidation. Under low redox potential conditions, where QA is reduced, P870 triplets (P870(+)) are formed. The time-resolved triplet-minus-singlet (TmS) spectrum of Car-less RC shows a deep bleaching at 870 nm, which belongs to P870(+), and additional (but smaller) bleaching at 800 nm; the entire spectrum decays at the same rate (with a lifetime of about 50 micros). The bleaching at 800 nm arises from the pigment interaction between P870(+) and the accessory bacteriochlorophylls on A and B branches (BA,B). In Car-containing RC, the TmS spectra of Car are accompanied by two smaller, negative signals--a sharp peak at 809 +/- 2 nm and a broad band at 870 nm--which decay at the same rate as the TmS spectrum of Car (ca 10 micros). The former is ascribed to the perturbation, by Car(+), of the absorption spectrum of BB; the latter, to the TmS spectrum of P870(+), a species that appears to be in approximate thermal equilibrium with Car(+). These assignments are consistent with the absorption-detected magnetic resonance spectra obtained by other workers at low temperatures.     

Structural events in the photocycle of green fluorescent protein

Picosecond time-resolved mid-infrared absorption changes of the wild type green fluorescent protein from Aequorea victoria are reported on structural events during the photocycle. Concomitant with rapid H/D transfer following excitation of the neutral A state at 400 nm, a transient signal at 1721/1711 cm(-1) (H/D) developed belonging to protonated glutamate 222, which was definitively assigned using the E222D mutant from the altered proton-transfer kinetics to aspartate in addition to the altered band position and intensity in the spectra. A transient at 1697 cm(-1), assigned to a structural perturbation of glutamine 69, had a H/D kinetic isotope effect of >32, showing the conformational dynamics to be sensitive to the active site H/D vibrations. The kinetic data up to 2 ns after excitation in the 1250-1800 cm(-1) region in D2O provided 10 and 75 ps time constants for the excited-state deuteron transfer and the associated A1* - A1 and A2* - A2 difference spectra and showed the radiative intermediate I state vibrations and the transient accumulation of the long-lived ground-state intermediate I2. Assignments of chromophore modes for the A1, A2, and I2 ground states are proposed on the basis of published model compound studies (Esposito, A. P.; Schellenberg, P.; Parson, W. W.; Reid, P. J. J. Mol. Struct. 2001, 569, 25 and He, X.; Bell, A. F.; Tonge, P. J. J. Phys. Chem. B 2002, 106, 6056). Tentative assignments for the singlet-state intermediates A1*, A2*, and I* are discussed. An unexpected and unassigned band that may be a C=C chromophore vibration was observed in the ground state (1665 cm(-1)) as well as in all photocycle intermediates. Optical dumping of the transient I population was achieved using an additional 532 nm pulse and the directly obtained I2 - I* difference spectrum was highly similar to the I2 - I* photocycle spectrum. The pump-dump-probe spectrum differed from the pump-probe photocycle difference spectrum with respect to the intensity of the phenol 1 mode at 1578 cm(-1), suggesting stronger delocalization of the negative charge onto the phenolic ring of the anionic chromophore in the dumped I2 state. Indication for structural heterogeneity of the chromophore, Glu 222, and the chromophore environment was found in the two parallel proton-transfer reactions and their distinct associated ground- and intermediate-state vibrations. Vibrational spectral markers at 1695 cm(-1) assigned to Gln 69, at 1631 cm(-1) belonging to a C=C mode, and at 1354 cm(-1) belonging to a phenolate vibration further indicated the I2 and I* states to be unrelaxed.     

Solid-phase fluorescent BODIPY–peptide synthesis via in situ dipyrrin construction

Traditional fluorescent peptide chemical syntheses hinge on the use of limited fluorescent/dye-taggable unnatural amino acids and entail multiple costly purifications. Here we describe a facile and efficient protocol for in situ construction of dipyrrins on the N-terminus with 20 natural and five unnatural amino acids and the lysine''s side chain of selected peptides/peptide drugs through Fmoc-based solid-phase peptide synthesis. The new strategy enables the direct formation of boron–dipyrromethene (BODIPY)–peptide conjugates from simple aldehyde and pyrrole derivatives without pre-functionalization, and only requires a single-time chromatographic purification at the final stage. As a model study, synthesized EBNA1-targeting BODIPY1–Pep4 demonstrates intact selectivity in vitro, responsive fluorescence enhancement, and higher light cytotoxicity due to the photo-generation of cytotoxic singlet oxygen. This work offers a novel practical synthetic platform for fluorescent peptides for multifaceted biomedical applications.

Solid-phase fluorescent BODIPY–peptide synthesis via in situ dipyrrin construction offers an efficient fluorescent peptide synthetic platform for multifaceted biomedical applications.