Neue Wege der Analytik durch Kombination der direkten quantitativen Dünnschicht-Chromatographie mit elektronischer Datenverarbeitung

A computer program for direct evaluation of thin-layer chromatograms, which already was described earlier [3] has been tested with a laboratory and some technical formulations of a pesticide. Results have been compared with those obtained by two conventional methods. Mean relative standard deviation calculated from results compiled by electronic data processing (method A) is about 6%, compared to 10% received by graphic method (method C) which is employed by most investigators. In addition, overall time of analysis is 34% higher if graphic method is used. Method A saves time and expense especially in routine analysis because working of the process is easier and may be performed even by assistent personal. The proposed method is suitable for the determination of different active ingredients and impurities even in difficult technical products.     

Discussion on the method for the measurement of the flexural modulus of coupled materials and reasons of the shifts of theQ −1 maxima caused by coupling

Summary When measuringQ ^–1 and the flexural resonance frequency of bars clamped at one end, constituted by a viscoelastic polymeric material glued to a rigid support of modulusE ₁, it is possible to calculate the componentsE ₂ andE ₂ of the complex elastic modulus of the polymeric material examined. In this work the minimum (critical) value of the ratioa=E ₂ /E ₁=a _c and the values of the ratioQ ₂ ^–1/Q ^–1=F ₁ are evaluated beyond which no exact calculation ofE ₂ and ofQ ₂ ^–1 is possible.Within the confidence limits of the linear viscoelasticity theory, these values depend on the accuracy of measurement of both frequency and resonance curve, as well as on the instrument employed, on the operating temperature and on the ratio between the thicknesses of the two coupled materials.In order to keep outside the critical conditions, the most convenient method involves the use of measurements of coupled test-pieces having different ratiosz between their thicknesses and of supports having different modulusE ₁, depending on the field of temperature of the analysis ofE ₂ and tg ₂ concerning and E.P.R. elastomer and a vulcanized cis-1,4 polyisoprene in very wide ranges of temperature comprising the glass transition. Moreover, it is demonstrated by analysis the shift on the temperature axis of the tg maximum of the composite test-piece with respect to the position of the tg maximum of the polymeric material alone.With 11 figures and 1 table     

Wirkungsgrade in der Welt des Lebens und der Technik

Zusammenfassung Um der oft gehörten Meinung entgegenzutreten, die energetischen Wirkungsgrade lebender Organismen seien wesentlich höher als die technischer Verfahren, werden entsprechende Werte miteinander verglichen. Der sehr niedrige Wirkungsgrad der Photosynthese zusammen mit der kleinen Energiedichte der Sonnenstrahlung erzwang ab einer kritischen Größe die Aufspaltung in Energiesammler, die Pflanzen, und Verbraucher chemischer Energie, den Tieren. Dank den 10 mal höheren Wirkungsgraden in der Technik, lassen sich Solarmobile bauen, die von der auf sie fallenden Sonnenstrahlung angetrieben werden. Wegen des Multiplikationsgesetzes der Teilwirkungsgrade ergeben sich sowohl für die Speicherung der Sonnenenergie in den fossilen Brennstoffen wie in der Nahrungskette extrem niedrige Wirkungsgrade.

---

Efficiencies in the world of life and in engineering

One often hears the opinion, that the efficiencies in the world of life are higher than in engineering. To disprove this, many values of efficiency of corresponding processes are compared. The very low efficiency of photosynthesis in living plants together with the low density of solar radiation has led the world of life to split into collectors of energy, the plants, and consumers of chemical energy, the animals. Thanks to the ten times higher efficiencies of solar cells, it is possible, to produce solar mobiles, vehicles that move driven by solar radiation.

---

---

Herrn Prof. Dr.-Ing. U. Grigull zum 75. Geburtstag gewidmet     

Spektrophotometrische Bestimmung von L-Askorbinsäure mit 2,2',5,5'-Tetra-(4-nitrophenyl)-3,3'-(3,3'-dimethoxy-4, 4'-biphenyl)-ditetrazoliumchlorid (TNBT)

Zusammenfassung Die Optimalbedingungen für die spektrophotometrische Bestimmung der L-Askorbinsäure mit TNBT wurden ermittelt. Die L-As-korbinsäure wurde in Anwesenheit eines 100fachen Überschusses folgender Stoffe bestimmt: Glukose, Fruktose, Saccharose, Wein-, Zitronen-, Oxal-, Äpfel- und Bernsteinsäure. 0,5g/ml ist die minimale Askorbinsäurekonzentration, die sich bestimmen läßt. Die rel. Standardabweichung beträgt 2,1%, der rel. Fehler 0,875%.

---

Spectrophotometric assay of L. ascorbic acid with 2,2,5,5-tetra-(4-nitro-phenyl)-3, 3-(3,3-dimethoxy-4,4-biphenyl)-ditetrazolium chloride (TNBT)

Summary The optimal conditions for spectrophotometric assay of L-ascorbic acid with TNBT were determined. L-ascorbic acid was assayed in the presence of a 100 fold excess of the following substances: glucose, fructose, sucrose, tartaric acid, citric acid, oxalic acid, malic acid and succinic acid. 0.5g/ml is the minimum concentration of ascorbic acid which can be assayed. The relative standard deviation is 2.1%, the relative error 0.875%.

     

Mechanosynthesis of zinc ferrite in hardened steel vials: Influence of ZnO on the appearance of Fe(II)

Nanocrystalline ZnFe₂O₄ spinel powders are synthesized by high-energy ball milling, starting from a powder mixture of hematite (α-Fe₂O₃) and zincite (ZnO). The millings are performed under air using hardened steel vials and balls. X-ray diffraction and Mössbauer spectrometry are used to characterize the powders. A spinel phase begins to appear after 3 h of milling and the synthesis is achieved after 9 h. Phase transformation is accompanied by a contamination due to iron coming from the milling tools. A redox reaction is also observed between Fe(III) and metallic iron during milling, leading to a spinel phase containing some Fe(II). The mechanism for the appearance of this phase is studied: ZnO seems to have a non-negligeable influence on the synthesis, by creating an intermediate wüstite-type phase solid solution with FeO.     

Darstellung und Struktur von Pyrazolyl-Kationen mit Polymethin- und Methan-Gerüst

The 4-pyrazoline-3-one1 reacts with 4-dimethylaminobenzaldehyde to yield the stable asymmetric cyanine dye2b which reacts with1 to give the colorless (aryl) (dipyrazolyl) methane3b. Using aldehydes with less cationstabilizing groups the polymethines2 are not isolated but only the methanes3. The structures of2b and3 are discussed by¹ H,¹³C and Hetero NMR spectra.     

Characterization of iron-silicon thin films by means of electron diffraction and X-ray spectroscopy

Iron-silicon thin films have been characterized by means of analytical transmission electron microscopic methods. Under certain conditions — composition and annealing temperature — these films exhibit thermoelectric behavior. In particular, the morphology and phase formation which results from annealing of these films, and doping with oxygen and nitrogen, are of interest. The thermoelectric phase -FeSi₂ is formed at temperatures above 500°C. This phase is transformed into electrically conducting phases at about 1000°C. A small oxygen content does not influence this crystallization process. If the oxygen content is higher than 15 atom-% the electrically conducting phases exist even at 500°C. The presence of a small nitrogen content inhibits the formation of the -FeSi₂ phase. The development of silicon and iron nitrides is possible.     

Redetermination of the Crystal Structure of the 1,2,4,7-anti-tetramethylbicyclo[2.2.1]heptan-2-yl cation at 110 K

The structure of the 1,2,4,7-anti-tetramethylbicyclo[2.2.1]heptan-2-yl cation ( 1 ) was redetermined by X-ray crystal structure analysis of its Sb₂F₁₁ salt at 110 K (P2₁/c, R1 = 5.76%). The most important structural features of 1 are: C(1)? C(2) = 1.409(9), C(1)? C(6) = 1.710(8), and C(2)…C(6) = 2.113(9) Å and C(2)? C(1)? C(6) = 84.7(4)°. These results agree with those obtained earlier by other methods for the rapidly equilibrating, partially s?-delocalized 1,2-dimethylbicyclo[2.2.1]heptan-2-yl cation ( 2 ). The detailed experimental procedure for the preparation of crystalline 1 · Sb₂F₁₁ and the crystal selection and mounting are described.     

Metallchelate mit Acetophenon-Benzoylhydrazon und Acetophenon-Salicoylhydrazon

The stoichiometry and structure of acetophenone benzoylhydrazone and acetophenone salicoylhydrazone chelates with some divalent metal ions are studied by conductometric titration and visible and infra-red absorption spectrophotometry. The results are supported by analysis of the solid complexes. The infra-red study revealed that coordination occurs through C=O and C=N groups. The shift in the C=O and C=N bands is utilised for the determination of bond lengths.     

Untersuchungen zur 3-Phononenabsorption in partiell kristallinen Polymeren

Zusammenfassung In dieser Arbeit wird die Dreiphononenabsorption in Polymeren, die den Hauptanteil an den dielektrischen Verlusten im Millimeterwellengebiet stellt, theoretisch und experimentell untersucht. Aus der Störungsrechnung bis zur 2. Ordnung wird die Temperaturabhängigkeit der Absorption abgeschätzt. Damit ist eine befriedigende Deutung des gesamten Temperaturverlaufs der dielektrischen Verlust-Kurven möglich. Im Hochtemperaturbereich läßt sich die Mehrphononenabsorption eindeutig gegenüber restlichen Relaxationsprozessen abgrenzen. Im Tieftemperaturgebiet konnte erstmals auch für das Millimeterwellengebiet ein temperaturunabhängiger Bestandteil fehlordnungsinduzierter Einphononenabsorption nachgewiesen werden. Im Übergangsbereich durchlaufen die Absorptionskurven einen Wendepunkt bei einer charakteristischen TemperaturT ₀, die dem Schwerpunkt der am Absorptionsprozeß beteiligten Phononenfrequenzen entspricht. Daraus konnten in Übereinstimmung mit dem Experiment die Frequenzen der niedrigsten optisch aktiven Phononen für die verschiedenen Polymeren abgeschätzt werden.

---

Summary The 3-phonon absorption in polymers, which gives the main contribution to their dielectric loss in the microwave region, is theoretically and experimentally investigated. Perturbation theory up to the second order is used for the evaluation of its temperature dependence. The theoretical results allow an interpretation of the total absorption-temperature-curves: In the high temperature region 3-phonon absorption can be distinguished from residual relaxation losses (above the glass temperature). In the low temperature region the existence of a low frequency tail of temperature independent disorderinduced one-phonon absorption became evident. At intermediate temperatures (50–150°K) the curves show an inflexion point or plateau at a characteristic temperatureT ₀, which according toT ₀= ⁰, corresponds to the frequencies of those phonons, that mainly contribute to the multiphonon absorption. The plateau gives, in good agreement with the experiment, the frequencies of the lowest optically active phonons in the various polymers.

---

---

Mit 6 Abbildungen in 8 Einzeldarstellungen

---

Vorgetragen auf der Arbeitssitzung des Fachausschusses Physik der Hochpolymeren in der Frühjahrstagung 1970 des Regionalverbandes Hessen-Mittelrhein-Saar der Deutschen Physikalischen Gesellschaft in Darmstadt, 10.–13. März 1970.