The Synthesis and Reactions of Yomogi Alcohol. Conversion of the artemisyl skeleton to the santolinyl skeleton by a 1,2-shift of a vinyl group. Synthesis of santolinatriene

The synthesis of yomogi alcohol (2, 5, 5-trimethylhepta-3,6-dien-2-ol, 2 ) is described, and experiments directed towards its allylic rearrangement to artemisia alcohol detervatives have been carried out. Acidic reagents open the ring of yomogi alcohol epoxide ( 16 ) at with participation of the 6,7-double-bond, a shift of the vinyl group results to yield a compound with the santolinyl skeleton. The same reagents are without effect when this double bond reduced. Action of butyllithium of the benzaldehyde acetal ( 41 ) of 2, 5-dimethyl-4-vinyl-2, dihydroxy-hex-5-ene ( 28 ), obtained by acid-catalyzed ring opening of yomogi alcohol epoxide in the presence of benzaldehyde, leads to santolinatriene ( 42 ). This vinyl shift is not observed in the case of O-acetyl yomogi alcohol epoxide ( 46 ), from white a compound believed to be an oxetan 48 (R ? COCH₃) is formed with concomitent shift of the acetate group. Further unusual reactions of the oxetan are described, and some observation about the epoxidation of sterically hindered allyl alcohols and their acetates are made.     

Synthesis of unsymmetrical 2,4-dialkylpyrazolo[1,5-a]-1,3,5-triazines

The reaction of 3-aminopyrazole with imidate esters such as ethyl acetimidate, gave N-(pyrazol-3-yl)acetamidine (1) rather than the isomeric 2-acetamidoyl-3-aminopyrazole. Ring closure of 1 with orthoesters such as ethyl propionimidate, afforded unsymmetrically substituted 2.4-dialkylpyrazolo[1,5-a]-1,3,5-triazines such as 4-ethyl-2-methylpyrazolo[1,5-a]-1,3,5-triazine (3). The structure of 1 was confirmed by several alternate syntheses. The unique feature of this two-step synthetic approach to the synthesis of pyrazolo[1,5-a]-1,3,5-triazines is that it is a convenient method of preparing fused triazines based on available pyrazoles rather than the less accessible dialkyltriazines.     

Measurement of theg-factor of the 4 1 + -state of202Pb

Theg-factor of the 4 ₁ ⁺ -state of²⁰²Pb was investigated by the IPAC-technique. Inspite of the long half-life, which was measured as:T _1/2(4 ₁ ⁺ -state)=1.97(2)ns and the strong applied external magnetic field of 95.0 kG no rotation of the 787 keV-(422keV)-961 keVγ-γ angular correlation could be observed. Theg-factor must therefore be very small. A computer fit gave the limits:g(4 ₁ ⁺ -state)=+0.002(4). This smallg-factor can be understood by the assumption of an accidental cancellation of a positive contribution by the main [f _5/2 ² ]₄-configuration and several negative contributions by admixtures of all other possible two neutron configurations.     

The volumetric analysis of phosphates

A method has been developed for the volumetric determination of orthophosphate, and a simple variation permits the determination of the average number of phosphorus atoms per molecule in condensed phosphates. For total P₂O₅ the phosphates are converted to the diacid orthosalt and precipitated as silver phosphate. The liberated acid is then titrated. For determination of chain length the condensed phosphate is converted to the diacid form and treated similarly, then hydrolysed and determined as orthophosphate. The ratio of the two titrations is equal to the average number of phosphorus atoms per molecule.     

Thermogravimetric and dynamic mechanical thermal analysis of pineapple fibre reinforced polyethylene composites

The thermal behaviour of pineapple leaf fibre (PALF) reinforced polyethylene composites was studied by thermogravimetric and dynamic mechanical thermal analysis. Fibre treatment was carried out using isocyanate, silane and peroxide to improve the interfacial adhesion between fibre and matrix. The effects of fibre loading and surface modification on the thermal properties were evaluated. It was found that at high temperature PALF degrades before the polyethylene matrix. The storage modulus increased with increase of fibre loading and decreased with increase of temperature. The treated fibre composites impart better properties compared to untreated system. Tan δ showed a distinct peak at low temperature ascribed to the glass transition temperature of polyethylene but no peak was observed for PALF fibre. The relative damping increased with fibre loading. Cole-Cole analysis was made to understand the phase behaviour of the composite samples.     

A Short Synthesis of (−)-Carbovir

(–)-Carbovir ((–)- 1 ) was synthesized via the cyclic carbonate 2 in four steps starting from enantiomerically enriched (–)-(S)-(cyclopent-2-enyl)methanol ((–)- 3 ).     

Synthesis of [(MeCyt)2H]I-structure and stability of a dimeric threefold hydrogen-bonded 1-methylcytosinium 1-methylcytosine cation

Reaction of trimethylsilyl-protected cytosine with methyl iodide afforded N1-methylated product. Subsequent treatment with ethanol resulted in cleavage of the protection group forming [(MeCyt)2H]I (4). Identity of was confirmed by microanalysis, mass spectrometry, 1H and 13C NMR spectroscopy and by single-crystal X-ray diffraction analysis. Crystals of consist of dimeric [(MeCyt)2H]+ cations and I- anions. These ions are arranged in the crystal such that there is a strong base stacking (mean stacking distance 3,467 angstroms) and, furthermore, pi interactions between I- and cytosine rings (mean distance 3,737 angstroms). The dimeric [(MeCyt)2H]+ cations are centrosymmetric having three strong hydrogen bonds, namely two terminal N4-H...O' ones (N4...O' 2.815(4) angstroms) and a central N3-H...N3' (N3...N3' 2.813(4) angstroms) one. Quantum chemical calculations on the DFT level of theory show that the gas phase structure of the dimeric cation exhibits two different terminal N-HO hydrogen bonds, a stronger (N4...O' 2.722 angstroms) and a weaker one (N4'...O 2.960 angstroms). The central N3-HN3[prime or minute] hydrogen bond (N3...N3' 2.852 angstroms) was characterized to have an unsymmetrically located proton and a typical double minimum potential with a very low activation barrier. The interaction energy between [(MeCyt)H]+ and MeCyt yielding [(MeCyt)2H]+ was calculated to be -42.4 kcal mol(-1)(ZPE and BSSE corrected). Comparison with the interaction energy (calculated on the same level of the theory) between cytosine and guanine yielding the triply hydrogen-bonded Watson-Crick dimer (-24.2 kcal mol(-1)) revealed a much higher stability of the hydrogen bonds in [(MeCyt)2H]+.     

Highly stereoselective addition of stannylcuprates to alkynones

The addition of stannylcuprate reagents such as (Bu3Sn)(PhS)CuLi to alkynones has been found to proceed in high yield and with excellent stereoselectivity for the Z isomer of the product (>95%). The behavior of the stannylcuprates is thus very different from that of their "carbocuprate" counterparts such as Me2CuLi or Me2Cu(CN)Li2 which are nonstereoselective. Furthermore, in contrast to the reactions of (R3Sn)(PhS)CuLi with the corresponding alkynoates, the presence of a proton source in the reaction medium has no effect on the stereoselectivity of the reaction of alkynones.     

Stability,Formation and Dissociation Kinetics of the Pentacoordinate Ni2+ and CO2+ Complexes with 1,5-Diazacyclooctane-N,N′-diacetic Acid

The stability constants of the Ni²⁺ and Co²⁺ complexes with 1,5-diazacyclooctane-N,N′-diacetic acid (H₂DACODA) have been determined potentiometrically in 0.5M KNO₃ at 25°. Only M(DACODA) and M(DACODA)OH^? were observed. In addition the formation and dissociation kinetics of the pentacoordinate complexes M(DACODA) has been studied in aqueous solution using a stopped-flow technique. Formation follows the rate law v_f = k_f [M²⁺] [HDACODA^?]/[H⁺], which can be interpreted as a bimolecular process either between M²⁺ and DACODA^2? (k) or between MOH⁺ and HDACODA^? (k). The second order rate constants k are much higher than those expected from water exchange and can only be explained by a strong internal conjugate base effect. In the limiting case, however, this is equivalent to the second possible explanation, which assumes MOH⁺ and HDACODA^? as reactive species. The dissociation rate is given by v_d = (k^ML + k [H⁺]) · [M(DACODA)].