Mobile phase versus stationary phase approaches to the direct injection of biological fluids in liquid chromatography

The liquid chromatographic analysis of drugs in urine through direct injection without any sample pretreatment was extended to micellar chromatography with nonionic surfactants, the Pinkerton ISRP column and the shielded hydrophobic phase (Hisep) column. The feasibility of using each was demonstrated through the determination of the diuretic, hydrochlorothiazide, in urine. Good separation, recovery, precision and linearity, and adequate limits of detection were obtained for this analysis with all three techniques. The advantages and limitations of the mobile phase approach of micellar chromatography and the two stationary phase approaches are discussed for the direct injection of urine as well as other biological fluids.     

Transport properties of a side-chain liquid-crystalline polymer. Poly(4-acryloyloxy biphenyl)

The transport properties of a side-chain liquid-crystalline polymer forming a smectic A phase have been investigated using dichloromethane as a permeant. Samples differing in the isotropization enthaoly were analyzed. A. Correlation between this thermal parameter and sorption has been found, while the diffusion coefficient is substantially the same in all samples. The results obtained can be explained in terms of a biphasis model in which a disordered permeable phase is present within the liquid-crystalline phase, which is impermeable to the diffusant molecules.     

Short-range order in miscible polymer blends: A monte carlo study

Local ordering in miscible binary polymer blends with strong attractive interactions between the two types of chains was investigated by computer simulation of allowable conformations on an incompressible cubic lattice. A tendency toward maximum ordering (in which chains pack in alternate parallel rows) is shown by the calculation of pair correlations and in “snapshots” of the mixtures. A specific directional interaction is not necessarily required for ordering. A comparison of these results with those recently obtained using mean-field theory is presented. The heat capacity of mixing was also calculated and found to be positive, with a value close to that reported experimentally.     

Intersegmental interaction and critical concentrations in PET–HFIP solutions

Spectroscopic determinations of the concentrations associated with the onset of intermolecular interaction in solutions of poly(ethylene terephthalate) (PET) are described. The intersegment forces perturb the electronic spectra and induce ground-state aggregation. These phenomena become observable at different chain densities, reflecting the influence of concentration on the coil dimensions, as well as the dynamical nature of the interactions. An estimate of the equilibrium constant for PET dimer formation in hexafluoroisopropanol is reported.     

Glass transitions in hydrogen-bonded polymer complexes

Mutual precipitates of poly (N, N-dimethyl acrylamide) and poly (4-hydroxystyrene) were collected from dioxane, methanol, or acetone. The glass transition (T_g) temperatures of the precipitates are higher than the weight-average values. Clear films cast from dimethylformamide solutions have lower T_g values. Complexation also occurred between poly (ethyl oxazoline) and poly (4-hydroxystyrene) in dioxane and between poly (vinyl pyrrolidone) and poly (4-hydroxystyrene) in methanol. Again, the glass transition temperatures of the precipitates are higher than the values for the blend films. The ΔC_p values associated with the glass transitions of the complexes are smaller than those of the blends having the same compositions. Negative excess heat capacities of mixing have been observed for several precipitates.     

Influence of trans-cis photoisomerizations of solubilized compounds on transition temperatures in the system cetyltrimethylammonium bromide-water: Light-induced phase transitions

Transition temperatures (TN1) from the nematic lyotropic liquid-crystalline phase to the isotropic phase were measured for the system cetyltrimethylammonium bromide (CTAB) water in the presence of small amounts of 3-stilbene carboxylic acid (3SC), 4-stilbene carboxylic acid (4SC) and Δ2/2'-bi-(2H-l,4-benzothiazine) (BT). TNI, increases as a function of trans-3SC or trans-4SC concentration, ranging from 01 to 08 wt %, by up to 12°C. A further increase in TNI between 2 and 5°C can be achieved by photochemically converting the solubilized trans stilbene derivatives to the cis isomers. Irradiation of a trans-3SC containing sample at a temperature just above TNl leads to a light-induced phase transition to the lyotropic liquid-crystalline phase. Solubilization of trans-BT causes a slight decrease of TNI while photoisomerization to cis-BT increases T_NI by 1°C.     

An experiment with arithmetic precision in linear algebra computations

Several techniques for experimental determination of floating point precision in practical computations are examined, and applied to linear algebra algorithms. These techniques are simple enough to be directly applicable to existing production codes, requiring a very limited amount of software on many machines, and yet they yield interesting information on the numerical precision of a computation. Our choice of linear algebra algorithms includes a direct solver (namely the MA32 program from the Harwell Library) and several variants of preconditioned conjugate gradients (the methods DIAG, INV, MINV and POL of Reference 1). The results may be of interest as method selection criteria, and thus complement Mflop performance data available from several sources.     

Comparison of four quantification methods for the determination of PCB in transformer oils

The analysis of PCB in transformer oils has been achieved with three HRGC/ECD based methods, proposed by the International Electrotechnical Commission (IEC/TC 10), by the Comité Européen de Normalisation (CEN/TC 19/WG 22) and by the Deutsches Institut für Normung (DIN 51 527). The same clean-up, described in the CEN/TC 19/WG 22, has been used for all the samples, allowing a comparison of the quantification procedure only. The total chlorine content has also been determined with X-ray fluorescence. These different methods of quantification are compared and their application for legislative purposes is discussed.Dedicated to Professor Dr Dieter Klockow on the occasion of his 60th birthday     

Organometallic complexes with biological molecues,part 3. in vivo cytotoxicity of diorganotin (IV) chloro and triorganotin (IV) chloro derivatives of penicillin g on chromosomes of aphanius fasciatus (pisces,cyprinodontiformes)

In order to obtain a continuous source of mitotic metaphases, gill tissue of Aphaius fasciatus (Pisces, Cyprinodontiformes) has been successfully employed. Results gathered after exposure of fish to R₂SnClpenG, R₃SnClpenGNa, to the parents R₂SnCl₂, R₃SnCl and to penGNa (penGNa = penicillinGNa; R = methyl, butyl and phenyl) suggest that both the parent organotin (IV) chloride and organotin (IV) chloropenG derivatives are toxic while penGNa exerts no significant toxic activity. Essentially, all of the chromosome abnormalities are classifiable as irregularly staining of chromosomes, breakages, side-arm bridges or pseudochiasmata.