Adsorption of azacrown ethers at solid–liquid interface. Contact angle and neutron reflectivity study

Adsorption of two alkylated N,N′-diaza-18-crown-6 ethers (decyl- and hexadecyl-derivatives, ACE-10 and ACE-16, respectively) on solid surfaces was studied by using contact angle and neutron reflectivity measurements. The solid substrates used were (a) Si covered with a native oxide layer (Si/SiO₂) and (b) Si with sputtered Pt layer (Si/Pt). The sensitivity of neutron reflectivity was drastically improved by applying the intermediate Pt layer of 150 Å, which gave rise to several Kiessig fringes in the experimentally accessible q-range. The position of the fringes is very sensitive to slight changes of the interfacial composition induced by adsorption of a thin monolayer, otherwise very difficult to detect. Unfortunately, in the studied case this sensitivity is immediately lost due to undesired adsorption of a protonated material on the Pt surface exposed to the lab air. A decrease of surface energy (increase of contact angle) of both Si/SiO₂ and Si/Pt upon exposure to toluene solutions of ACEs suggests that the latter are attached to the surface via the hydrophilic azacrown ether head with alkyl chains standing upright towards the liquid phase.     

Line intensities of acetylene: New measurements in the 1.5-μm spectral region and global modelling in the ΔP=10 series

Using the Fourier transform spectra of the acetylene molecule recorded near 1.5-μm, the intensities of 111 lines belonging to seven hot bands of the main isotopologue ¹²C₂H₂ have been retrieved by means of a multispectrum fitting procedure. Considering the density of lines in the spectra, and the fact that the measured bands are the weakest observed, the accuracy of the measurements is around 10%. At first stage, an empirical treatment of these data has been performed, leading to the vibrational transition dipole moment squared and some Herman–Wallis coefficients. Then the measured line intensities of this work and collected ones from the literature have been treated simultaneously within the framework of the effective operator approach.     

Sonochemical reactions with mesoporous alumina

Herein, we report the sonochemical reactions with MSU-X mesoporous alumina (m-Al₂O₃) in aqueous solutions. Sonication (f = 20 kHz, I = 30 W cm^?2, W_aq = 0.67 W mL^?1, T = 36–38 °C, Ar) causes significant acceleration of m-Al₂O₃ dissolution in the pH range of 4–11. Moreover, power ultrasound has a dramatic effect on the textural properties and phase composition of m-Al₂O₃. Short-time sonication at pH = 4 leads to the formation of nanorods and nanofibers of boehmite, AlO(OH). Prolonged ultrasonic treatment causes high aspect morphology transformation to aggregated nanosheets in weakly acid solutions or plated nanocrystals in alkaline solutions. Sonochemical products in alkaline medium are composed principally from boehmite and small amounts of bayerite, Al(OH)₃. Silent hydrolysis of m-Al₂O₃ yields boehmite at pH = 4 and bayerite at pH = 11. The effect of ultrasound on the textural properties of mesoporous alumina as well as on the transformation of nanosized bayerite to boehmite can be consistently attributed to the transient strong heating of the liquid shell surrounding the cavitation bubble which caused the chemical processes similar to those occurred during hydrothermal treatment.     

Non-quadratic defect energy: A comparison of gradient plasticity simulations to discrete dislocation dynamics results

A small-deformation strain gradient plasticity (GP) model for single-crystals has been proposed in [1], including a grain boundary (GB) yield condition without hardening. It has been extended by a hardening term for the GBs after a comparison to discrete dislocation dynamics (DDD) results in [2]. Differences between the strain gradients of the GP results and the DDD results motivate the consideration of a non-quadratic defect energy [3] in the GP model. It is shown that the gradients in the GP model can be improved using an exponent different from two. Remaining discrepancies in the strain profiles, compared to the DDD results, are attributed to the neglect of the individual gradients of plastic slip and due to the lack of a mechanism for the misorientation-dependent elastic interactions of dislocations across GBs [4] in the GP model. (© 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Characterization of the Charge Transfer Complex from Furan and Maleic Anhydride and the Alternating Copolymer

A previously unreported copolymer between furan and maleic anhydride was readily obtained by free radical initiation of benzene solutions of the comonomers. The product copolymers exhibit remarkably uniform composition regardless of monomer feed ratios. A donor-acceptor complex was suspected to account for the 1:1 alternating sequence of the monomers in the product. The complex was easily detected and partially characterized, although its exact role in the mechanism is uncertain.     

Case Studies With Mathematical Modeling of Free-Radical Multi-Component Bulk/Solution Polymerizations: Part 1

In part 1 of this series of two extensive overviews of multi-component polymerization case studies, we present mathematical modelling results with experimental confirmations. The case studies are from free-radical, bulk and/or solution polymerizations, covering the range from homo- to hexa-polymerization at both regular and elevated temperature levels, i.e., without and with possible depropagation steps. The model eventually tackles complex polymerization features, ranging from conversion-time histories to more esoteric multi-component composition and/or sequence length profiles. Part 2 of the series will describe more complicated situations with depropagation and composition control policies, all relying solely on a unique monomer/polymer database of physico-chemical properties and other characteristics, with no further parameter adjustment. These database items will be cited in tables in part 2 of the series.     

Cure Kinetics of Poly(acrylonitrile-butadiene-styrene) Modified Epoxy–Amine System

The cure kinetics of epoxy based on the diglycidyl ether of bisphenol A (DGEBA) modified with different amounts of poly(acrylonitrile-butadiene-styrene) (ABS) and cured with 4,4′-diaminodiphenylsulfone (DDS) was investigated by employing differential scanning calorimetry (DSC). The curing reaction was followed by using an isothermal approach over the temperature range 150–180°C. The amount of ABS in the blends was 3.6, 6.9, 10 and 12.9 wt%. Blending of ABS in the epoxy monomer did not change the reaction mechanism of the epoxy network formation, but the reaction rate seems to be decreased with the addition of the thermoplastic. A phenomenological kinetic model was used for kinetic analysis. Activation energies and kinetic parameters were determined by fitting the kinetic model with experimental data. Diffusion control was incorporated to describe the cure in the latter stages, predicting the cure kinetics over the whole range of conversion. The reaction rates for the epoxy blends were found to be lower than that of the neat epoxy. The reaction rates decreased when the ABS contents was increased, due to the dilution effect caused by the ABS on the epoxy/amine reaction mixture.     

Influence of Monomer and Initiator Concentrations on the Simultaneous Grafting of Several Monomers onto Insoluble Collagen

Simultaneous grafting of 2-hydroxyethyl methacrylate and methyl methacrylate (3:1 and 3:2 mole ratios) onto insoluble collagen with ceric ammonium nitrate as initiator was attempted with a view to optimizing conditions for the preparation of hydrogels. The influence of monomer and initiator concentrations on the grafting reactions was investigated. The grafting results are discussed in the light of grafting efficiency and percentage of grafting. They were found to be lower when the 3:1 mole ratio of monomers was used.