Fluoroalkyl-s-triazines

A series of symmetrically and asymmetrically substituted s-triazines was synthesized by condensation of fluorocarbon nitriles (Scheme II, compounds 1a-c ) and by cyclodehydration of a fluorocarbon imidoylamidine utilizing a fluorocarbon anhydride (Scheme III, compounds 2a-e ). Among the new nitriles prepared for incorporation in these reaction paths were 11-H-4,9-dioxahexadecylfluoroundecanenitrile ( 3 ) and 6-chloro-6-H-4-oxaheptafluorohexanenitrile ( 4 ), prepared by Scheme 1.     

An NMR study of the species produced by the reactions of dialkyl magnesium and HCl with calcined silica and the polymerisation performance of Ziegler-Natta catalysts produced from this support material

The effect of calcinations on the silica surface groups and thereby on the activity of Ziegler-Natta catalysts in ethylene homopolymerisation has been studied. Silica was calcined at different temperatures and treated with MgR₂ and HCl. Silica surface groups were identified by using ¹H MAS NMR and ¹³C and ²⁹Si CP MAS NMR techniques. Magnesium, titanium and chlorine were measured by elemental analysis. Ziegler-Natta catalysts were prepared from these supports and subsequently used in ethylene homopolymerisation. Maximum activity was obtained with the catalyst based on 590 °C calcined silica. The results indicate that MgR₂ reacts with siloxane-groups (Si-O-Si) in the 300 °C calcined silica, leaving the hydrogen-bonded hydroxyl-groups unreacted. Low activity Si-O-Ti(Cl)₂-O-Si species are formed after reacting with TiCl₄. The higher activity in the catalyst based on 590 °C calcined silica can be explained by the formation of -Si(R)-O-Si-O-TiCl₃ groups, originating from the siloxane bridges which cannot form in 300 °C calcined silica. Other explanations for the higher activity are a higher Mg/Ti ratio or small amounts of crystal water formed in the 590 °C calcined silica.     

Probing metabolic alterations in breast cancer in response to molecular inhibitors with Raman spectroscopy and validated with mass spectrometry

Rapid and accurate response to targeted therapies is critical to differentiate tumors that are resistant to treatment early in the regimen. In this work, we demonstrate a rapid, noninvasive, and label-free approach to evaluate treatment response to molecular inhibitors in breast cancer (BC) cells with Raman spectroscopy (RS). Metabolic reprogramming in BC was probed with RS and multivariate analysis was applied to classify the cells into responsive or nonresponsive groups as a function of drug dosage, drug type, and cell type. Metabolites identified with RS were then validated with mass spectrometry (MS). We treated triple-negative BC cells with Trametinib, an inhibitor of the extracellular-signal-regulated kinase (ERK) pathway. Changes measured with both RS and MS corresponding to membrane phospholipids, amino acids, lipids and fatty acids indicated that these BC cells were responsive to treatment. Comparatively, minimal metabolic changes were observed post-treatment with Alpelisib, an inhibitor of the mammalian target of rapamycin (mTOR) pathway, indicating treatment resistance. These findings were corroborated with cell viability assay and immunoblotting. We also showed estrogen receptor-positive MCF-7 cells were nonresponsive to Trametinib with minimal metabolic and viability changes. Our findings support that oncometabolites identified with RS will ultimately enable rapid drug screening in patients ensuring patients receive the most effective treatment at the earliest time point.

Rapid and accurate response to targeted therapies is critical to differentiate tumors that are resistant to treatment early in the regimen.     

Further solvent-free reactions of ferrocenylaldehydes: Synthesis of 1,1′-ferrocenyldiimines and ferrocenylacrylonitriles

Grinding of 1,1′-ferrocenedicarboxaldehyde with a 2.2 molar equivalent of an aromatic amine in a solvent-free environment provided excellent yields of 1,1′-ferrocenyldiimines. After mixing the aldehyde and amines, a gum or melt formed which eventually solidified to the product. An analytically pure sample of the product was obtained by cold recrystallization. Grinding of ferrocenecarboxaldehyde and 4-substituted phenylacetonitriles under solvent-free conditions provided good yields of the corresponding ferrocenylacrylonitriles. The yield in this reaction was very low when the substituent group para to the acetonitrile group was electron-donating.     

Screening, library-assisted identification and validated quantification of 23 benzodiazepines, flumazenil, zaleplone, zolpidem and zopiclone in plasma by liquid chromatography/mass spectrometry with atmospheric pressure chemical ionization

A liquid chromatographic/mass spectrometric assay with atmospheric pressure chemical ionization (LC/APCI-MS) is presented for fast and reliable screening and identification and also for precise and sensitive quantification in plasma of the 23 benzodiazepines alprazolam, bromazepam, brotizolam, camazepam, chlordiazepoxide, clobazam, clonazepam, diazepam, flunitrazepam, flurazepam, desalkylflurazepam, lorazepam, lormetazepam, medazepam, metaclazepam, midazolam, nitrazepam, nordazepam, oxazepam, prazepam, temazepam and tetrazepam, triazolam, their antagonist flumazenil and the benzodiazepine BZ1 (omega 1) receptor agonists zaleplone, zolpidem and zopiclone. It allows confirmation of the diagnosis of an overdose situation and monitoring of psychiatric patients' compliance. The analytes were isolated from plasma using liquid-liquid extraction and were separated on a Merck LiChroCART column with Superspher 60 RP Select B as the stationary phase. Gradient elution was performed using aqueous ammonium formate and acetonitrile. After screening and identification in the scan mode using the authors' LC/MS library, the analytes were quantified in the selected-ion monitoring mode. The quantification assay was fully validated. It was found to be selective proved to be linear from sub-therapeutic to over therapeutic concentrations for all analytes, except bromazepam. The corresponding reference levels the assay's accuracy and precision data for all studied substances are listed. The accuracy and precision data were within the required limits with the exception of those for bromazepam. The analytes were stable in frozen plasma for at least 1 month. The validated assay was successfully applied to several authentic plasma samples from patients treated or intoxicated with various benzodiazepines or with zaleplone, zolpidem or zopiclone. It has proven to be appropriate for the isolation, separation, screening, identification and quantification of the drugs mentioned above in plasma for clinical toxicology, e.g. in cases of poisoning, and forensic toxicology, e.g. in cases of driving under the influence of drugs.     

Kinetically inert transition metal complexes that reversibly bind to DNA

Transition metal complexes that reversibly bind to DNA have been studied for almost 30 years. In the last few years a variety of new systems have been developed, employing a range of metal ions and ligand architectures. In many cases, high affinity binding and specific selectivities have been observed. These complexes display properties that make them attractive as probes of DNA structure and function, suggesting that they may find a r?le as prototypical tools for a spectrum of applications, from basic molecular biology to medicine. This review presents an overview of some of the structures and properties of such complexes.     

Synthese und Eigenschaften von Dimolybdän-μ-nitrido-heptachlorid Mo2NCl7

Synthesis and Properties of Di-molybdenum-μ-nitrido-heptachloride, Mo₂NCl₇ Mo₂NCl₇ was prepared by the reaction of molybdenum pentachloride with the bromide of Millon's base, [Hg₂N]Br, in boiling CCl₄. It forms a moisture sensitive, dark green crystal powder, the magnetic moment at 20°C (μ_eff = 0.95 B.M.) being strongly reduced. With acetonitrile the μ-nitrido complex Mo₂NCl₇ · 3CH₃CN is formed, with phosphoryl chloride the donor acceptor complex Mo₂NCl₇ · 2POCl₃, respectively. Partial oxidation of the latter complex with chlorine leads to very unstable Mo₂NCl₈ · 2POCl₃, from which (PPh₄)₃[Mo₃NCl₁₀] can be obtained by the reaction with PPh₄Cl. For the complex (PPh₄)₃[Mo₂NCl₁₀] is also found a reduced paramagnetism of μ_eff = 1.47 B.M. at 20°C. All complexes are characterized by i.r. spectroscopy.     

Substituent effects on the photophysical properties of pterin derivatives in acidic and alkaline aqueous solutions

Pterins are heterocyclic compounds with important biological functions, and most of them may exist in two acid-base forms in the pH range between 3 and 13 in aqueous solution. In this work, the photophysical properties of acid and basic forms of six compounds of the pterin family (6-hydroxymethylpterin [HPT], 6-methylpterin [MPT], 6,7-dimethylpterin [DPT], rhamnopterin [RPT], N-methylfolic acid [MFA], and pteroic acid [PA]) have been studied. The effects of the chemical nature of the substituents at position 6 of the pterin moiety and the effects of the pH on the absorption and emission properties are analyzed. The fluorescence characteristics (spectra, quantum yields, lifetimes) of these compounds have been investigated using the single-photon-counting technique. Results obtained for pterin derivatives containing small substituents with 1 carbon atom (HPT, MPT, DPT) and short hydrocarbon chain (4 carbon atoms) (RPT) are different from those found for pterin derivatives containing a p-aminobenzoic acid (PABA) moiety in the substituent (MFA and PA). Fluorescence quantum yields (Phi(F)) of the first group of compounds are relatively high (>/=0.4), whereas MFA and PA exhibit very small Phi(F) values (相似文献   

Solvothermale Synthese und Bestimmung der Kristallstrukturen von AgBiI4 und Ag3BiI6

Solvothermal Synthesis and Crystal Structure Determination of AgBiI₄ and Ag₃BiI₆ AgBiI₄ and Ag₃BiI₆ were synthesized by solvothermal reaction from AgI and BiI₃ in diluted HI‐solution (20 %) at a temperature of 160 °C. The greyish‐black crystals grow as octahedra (AgBiI₄) or hexagonal/trigonal platelets (Ag₃BiI₆). AgBiI₄ crystallizes in space group Fd3¯m with a = 1222.3(1) pm (300 K) and Z = 8 whereas Ag₃BiI₆ shows the space group R3¯m with a = 435.37(6) pm, c = 2081.0(4) pm (300 K) and Z = 1. Both crystal structures show stacking sequence abcabc… of hexagonal layers containing Iodine. Bismuth and silver are sharing octahedral sites with different mass ratio in both structures. The part of silver which could be localized varies with temperature. This behaviour indicates mobility of silver within the crystal structure. The ionic conductivity of AgBiI₄ is explored. AgBiI₄ and Ag₃BiI₆ show close structural relationship, with AgBiI₄ as a variant with a higher degree of order.