Artificial metalloenzymes for enantioselective catalysis based on biotin-avidin

Homogeneous and enzymatic catalysis offer complementary means to generate enantiomerically pure compounds. Incorporation of achiral biotinylated rhodium-diphosphine complexes into (strept)avidin yields artificial metalloenzymes for the hydrogenation of N-protected dehydroamino acids. A chemogenetic optimization procedure allows one to produce (R)-acetamidoalanine with 96% enantioselectivity. These hybrid catalysts display features reminiscent both of enzymatic and of homogeneous systems.     

Structural-chemical disorder of manganese dioxides 1. Influence on surface properties at the solid-electrolyte interface

Relationships between lattice parameters of manganese dioxides and their surface properties at the solid-aqueous solution interface were investigated. The studied series ranged from ramsdellite to pyrolusite and encompassed disordered MD samples. The structural model used takes into account structural defects: Pr (rate of pyrolusite intergrowth) and Tw (rate of microtwinning). Water adsorption isotherms showed that the cross sectional area of water molecules adsorbed in the first monolayer is positively correlated to Pr. Titration of the surface charge of the MD series evidenced a positive linear relationship between the PZC and Pr (Pr=0, Tw=0, PZC=1 for ramsdellite; Pr=1, Tw=0, PZC=7.3 for pyrolusite; gamma-MD with intermediate values of Pr (0.2 to 0.45) have increasing PZC values). The rate of microtwinning appeared as a secondary factor for the increase of the PZC. The above correlations are explained by the chemical defects at the origin of the structural disorder, respectively Mn(3+)/Mn4+ substitution for Pr and Mn vacancies for Tw, which result in proton affinity and thus in increased PZC. The experimental results are compared with data collected in the literature for manganese dioxides as well as for dioxides of transition elements with tetragonal structure.     

An Asymmetric Edge-Sharing Bioctahedral Complex: (η2-DAniF)MoIII(μ-DAniF)2(μ-O,Cl)MoVCl2 (DAniF=N,N′-di-p-anisylformamidinate)

A novel asymmetric, edge-sharing bioctahedral complex with formamidinato ligands ( ²-DAniF)Mo(-DAniF)₂(-O,Cl)MoCl₂, 1, (DAniF=N,N-di-p-anisylformamidinate) has been isolated as a byproduct from the preparation of the dimolybdenum(II,III) compound Mo₂(DAniF)₃Cl₂. An X-ray crystallographic study shows that the structure consists of edge-sharing bioctahedra, with the shared edge defined by the vector joining the: -O and -Cl ligands. Compound 1 is best formulated as a mixed-valent Mo^IIIMo^V compound, the Mo(V) ion being that with the two terminal Cl^– ligands. The cyclic voltammogram of 1 shows a reversible reduction at –0.472 V and a reversible oxidation at 1.028 V vs. the Ag/AgCl reference electrode, while the absorption spectrum of 1 reveals an intense low energy absorption at 523 nm ( _max=12 500) which is attributed to an intervalence charge transfer transition. Crystallographic data for 1 are as follows: a=13.387(1) Å, b=15.500(2) Å, c=21.855(2) Å, =98.786(2)°, V=4481.8(8) ų, P2₁/c, R1 (wR2)=0.082 (0.177).     

Rhodium-catalyzed enantioselective diboration of simple alkenes

Enantioselective catalytic reactions that operate directly on inexpensive unactivated alkenes are extraordinarily useful for the preparation of chiral organic building blocks and new materials. While a number of such processes have been developed, our ability to meet the intensifying demand for inexpensive stereochemically complex materials will require a significant expansion of practical catalytic asymmetric reaction methodology. In this regard, the rhodium-catalyzed enantioselective diboration reaction has been developed in order to address a number of extant problems in catalytic alkene transformation simultaneously. This process provides an enantiomerically enriched reactive dimetalated intermediate which can be converted to a variety of difunctional reaction products.     

Understanding the Hofmeister effect in interactions between chaotropic anions and lipid bilayers: molecular dynamics simulations

A set of all-atom molecular dynamics simulations have been performed to better understand critical phenomena regarding a Hofmeister series of anions and lipid bilayers. The simulations isolate the effect of anion size and show clear differences in the interactions with the dipolar phoshpatidylcholine headgroup. Cl- anions penetrate into the headgroup region of the bilayer, but the simulations confirm theories which predict that larger anions penetrate more deeply, into a more heterogeneous and hydrophobic molecular region. That anion size leads to such differences in partitioning in the bilayer provides atomic-level support to hypotheses inspired by several experimental studies. The ability of larger anions to bury deep within the bilayer is correlated with a less well-structured hydration shell, shedding of which upon penetration incurs a smaller penalty for the larger anions than for Cl-.     

Fluorescence correlation spectroscopic studies of diffusion within the ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate

Fluorescence correlation spectroscopy (FCS) measurements have been performed in order to determine the translational diffusion coefficients of three differently charged fluorescent probes (cationic: rhodamine 6G, neutral: 4-dicyanomethylene-2-methyl-6-p-dimethylaminostyryl-4-H-pyran, DCM, and anionic: fluorescein) dissolved within the common room temperature ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate, [bmim][PF6]. These experiments demonstrate that FCS is a rapid, sensitive, precise (typical RSD from 4-8%), and low-consumption screening tool for the determination of analyte mobility within microliter ionic liquid samples.     

An intraindividual study of the characteristics of erythema induced by bath and oral methoxsalen photochemotherapy and narrowband ultraviolet B

We compared the characteristics of psoralen and ultraviolet A (PUVA) erythema in skin photosensitized by bath or oral methoxsalen in 20 subjects. Erythema was assessed visually and with a reflectance instrument at 24 h intervals for 7 days. In addition, narrowband ultraviolet B (TL-01 UVB) erythema was examined in 19 of these subjects at 4, 8, 12, 24, 48 and 72 h and in another nine subjects at 12, 15, 18, 21 and 24 h. Both bath and oral PUVA exhibited broad erythemal peaks beyond 72 h. For topical PUVA the lowest minimal phototoxic dose (MPD) occurred at 120 and 144 h (P = 0.01 and 0.03 compared with 72 h). Oral PUVA erythema peaked earlier at 96 h: the MPD was significantly lower at 96, 120 and 144 h compared with 72 h (P = 0.001, 0.01 and 0.02, respectively). At 120 h, bath PUVA had a significantly steeper slope compared with oral PUVA. The TL-01 UVB minimal erythema dose was significantly lower at 12 h compared with 24 h (P = 0.019). The majority of subjects were at maximal erythema at 12 h (22 of 28) and 15 h (eight of nine). Our results suggest that peak erythema for bath PUVA, oral PUVA and TL-01 UVB occurs at 120, 96 and 12-15 h, respectively.     

Quantum yield of the iodide-iodate chemical actinometer: dependence on wavelength and concentrations

The quantum yield (QY) of the iodide-iodate chemical actinometer (0.6 M KI-0.1 M KIO3) was determined for irradiation between 214 and 330 nm. The photoproduct, triiodide, was determined from the increase in absorbance at 352 nm, which together with a concomitant measurement of the UV fluence enabled the QY to be calculated. The QY at 254 nm was determined to be 0.73 +/- 0.02 when calibration was carried out against a National Institute of Standards and Technology traceable radiometer or photometric device. At wavelengths below 254 nm the QY increased slightly, leveling off at -0.80 +/- 0.05, whereas above 254 nm the QY decreases linearly with wavelength, reaching a value of 0.30 at 284 nm. In addition, the QY was measured at different iodide concentrations. There is a slight decrease in QY going from 0.6 to 0.15 M KI, whereas below 0.15 M KI the QY drops off sharply, decreasing to 0.23 by 0.006 M KI. Calibration of the QY was also done using potassium ferrioxalate actinometry to measure the irradiance. These results showed a 20% reduction in QY between 240 and 280 nm as compared with radiometry. This discrepancy suggests that the QY of the ferrioxalate actinometer in this region of the spectrum needs reexamination.     

Infrared and Raman spectra,conformational stability,vibrational assignment and ab initio calculations of methylvinyl silyl chloride

The infrared spectra (3200-50 cm(-1)) of gaseous and solid and Raman spectra (3200-10 cm(-1)) of the liquid and solid methylvinyl silyl chloride, CH(2)=CHSiH(CH(3))Cl, and the Si-d isotopomer have been recorded. The three expected stable conformers (the three different groups eclipsing the double bond) have been identified in the fluid phase, but it was not possible to obtain an annealed solid with a single conformer. Variable temperature (-105 to -150 degrees C) studies of the infrared spectra of the sample dissolved in liquid krypton has been carried out. From these data the enthalpy differences between the most stable conformer with the hydrogen atom (HE) eclipsing the double bond to that with the chlorine atom (ClE) and the methyl group (ME) eclipsing the double bond have been determined to be 17+/-4 cm(-1) (203+/-48 Jmol(-1)) and 80+/-12 cm(-1) (957+/-144 Jmol(-1)), respectively. However in the liquid state the ME conformer is the most stable form with enthalpy differences of 13+/-4 and 27+/-7 cm(-1) to the HE and ClE rotamers, respectively. It is estimated that there is 39% of the HE conformer, 35% of the ClE conformer, and 26% of the ME conformer present at ambient temperature. A complete vibration assignment is proposed for the HE conformer which is based on infrared band contours and group frequencies, which is supported by normal coordinate calculations utilizing the force constants from ab initio MP2/6-31G(d) calculations. Additionally, several of the fundamentals for the other two conformers have been assigned. The optimal geometries, conformational stabilities, harmonic force fields, infrared intensities, Raman activities, depolarization ratios, and vibrational frequencies are reported for all three conformers from MP2/6-31G(d,p) ab initio calculations with full electron correlation. Optimized geometrical parameters and conformational stabilities have been obtained from MP2/6-311+G(d,p) calculations. At this highest level of calculations, the HE conformer is predicted to be more stable by 62 and 84 cm(-1) than the ME and ClE conformers, respectively. The coefficients from the potential function governing the conformational interchange have been obtained from the MP2/6-31G(d) ab initio calculations. By utilizing the frequency of the SiH stretching mode, the r(0)-H distance has been determined to be 1.481 A for the HE conformer. The ab initio calculated quantities are compared to the experimentally determined values where applicable, as well as to some corresponding results for some similar molecules.