Interpretation of Mott–Schottky plots of photoanodes for water splitting

A large body of literature reports that both bismuth vanadate and haematite photoanodes are semiconductors with an extremely high doping density between 10¹⁸ and 10²¹ cm⁻³. Such values are obtained from Mott–Schottky plots by assuming that the measured capacitance is dominated by the capacitance of the depletion layer formed by the doping density within the photoanode. In this work, we show that such an assumption is erroneous in many cases because the injection of electrons from the collecting contact creates a ubiquitous capacitance step that is very difficult to distinguish from that of the depletion layer. Based on this reasoning, we derive an analytical resolution limit that is independent of the assumed active area and surface roughness of the photoanode, below which doping densities cannot be measured in a capacitance measurement. We find that the reported doping densities in the literature lie very close to this value and therefore conclude that there is no credible evidence from capacitance measurements that confirms that bismuth vanadate and haematite photoanodes contain high doping densities.

Electron injection from the contact dominates the Mott–Schottky plots of thin-film photoanodes, rather than the depletion capacitance.     

Mural inspection by vibration measurements with TV-holography

A commonly encountered problem in the conservation of historical murals is the identification of sections in the plaster that have detached from the wall and thus threaten to fall off. Commonly, walls are inspected by the acoustic response to a gentle finger-tapping (percussion method). Since this is a costly and cumbersome technique, means for a more automatic inspection are searched for. A TV-holography system of increased sensitivity in combination with acoustic excitation of the object is shown to be a new and powerful tool for monitoring of loose areas. It has the advantage of non-contact and remote operation which, for example, is extremely useful in large buildings. Principles of the method, experimental results obtained at an artificial wall in the laboratory, and a thorough comparison of results from historical sites gained by the traditional percussion method and the new technique are presented. The latter shows very good agreement in the assessment of wall quality and thus is evidence of the suitability of the optical equipment for tasks in conservation.     

Evidence of wave front folding of sonic booms by a laboratory-scale deterministic experiment of shock waves in a heterogeneous medium

The influence of the planetary boundary layer on the sonic boom received at the ground level is known since the 1960s to be of major importance. Sonic boom propagation in a turbulent medium is characterized by an increase of the mean rise time and a huge variability. An experiment is conducted at a 1:100,000 scale in water to investigate ultrasonic shock wave interaction with a single heterogeneity. The experiment shows a very good scaling with sonic boom, concerning the size of the heterogeneities, the wave amplitude, and the rise time of the incident wave. The wave front folding associated with local focusing, and its link to the increase of the rise time, are evidenced by the experiment. The observed amplification of the peak pressure (by a factor up to 2), and increase of the rise time (by up to about one magnitude order), are in qualitative agreement with sonic boom observations. A nonlinear parabolic model is compared favorably to the experiment on axis, though the paraxial approximation turns out less precise off axis. Simulations are finally used to discriminate between nonlinear and linear propagations, showing nonlinearities affect mostly the higher harmonics that are in the audible range for sonic booms.     

Liquid Bridges Between Balls: The Small Volume Instability

Stability for a liquid bridge between two solid balls is studied by cutting and scaling pieces of a standardized family of Delaunay surfaces. This theoretical framework is used to analyze the problem numerically.     

Electron energy-loss spectroscopy at incommensurately modulated crystalline and glassy Ba2TiGe2O8

Based on cluster molecular orbital calculations, high-energy resolution (ΔE?～ 0.4?eV) Ti–L_2,3 electron energy loss near-edge structures of single-crystalline and glassy Ba₂TiGe₂O₈ are interpreted. The finding that the Ti–L_2,3 near-edge structure of the Ba₂TiGe₂O₈ single crystal possesses less pronounced peaks than the glass under identical experimental conditions can be attributed to distinct distortions of the titanium environment caused by the very strong one-dimensional structural modulation hosted by the Ba₂TiGe₂O₈ crystal lattice. As lattice periodicity is absent in the glass, the titanium environment is more regular in the vitreous surroundings. Moreover, the modulation in crystalline Ba₂TiGe₂O₈ is responsible for the virtually indiscernible O–K near-edge structures of the glassy and crystalline samples.     

Responsive core–shell microgels: Synthesis,characterization, and possible applications

Core–shell microgels are of increasing interest as smart carriers of catalysts, as sensors, or as building blocks for colloidal superstructures. In the context of colloidal assemblies, photonic applications are probably the most promising ones. This progress report presents and discusses the most recent results in this area focusing on the last 2–3 years, and also gives some background information. In addition, potential perspectives of this area will be outlined. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013, 51, 1073–1083     

The U.S. Department of Energy (DOE) Sampling and Analytical Chemistry Guide: Doe Methods for Evaluating Environmental and Waste Management Samples

Abstract

DOE Methods for Evaluating Environmental and Waste Management Samples (DOE Methods) is a guidance/methods document to support sampling and analysis activities at DOE sites. DOE Methods is intended to supplement existing guidance documents (e.g., EPA's Test Methods for Evaluating Solid Waste, SW-846), which generally apply to low-level or nonradioactive samples. DOE Methods targets the complexities of DOE radioactive mixed waste and environmental samples. The document contains quality assurance (QA), quality control (QC), safety, sampling, organic analysis, inorganic analysis, and radioanalytical guidance as well as sampling and analytical methods. An addendum is distributed every six months (April and October) with updated guidance and additional methods.

DOE Methods provides a vehicle for technology transfer within the environmental restoration (ER) and waste management (WM) (collectively known as EM) community. As DOE Methods evolves, its usefulness and applicability are anticipated to grow to meet the demands of the DOE/EM mission. At the present time, DOE Methods contains methods and guidance information supplied by DOE sites. Because the EM activities in DOE are not unique to the United States, the international environmental community could benefit from the information gathered for the DOE program. This information could provide additional resources for their EM activities.     

Efficient Conversion of Thioglycosides into Glycosyl Fluorides Using Dimethyl(methylthio)sulfonium Tetrafluoroborate

Abstract

Alkyl and aryl thioglycosides were converted in high yield into the corresponding α-glycosyl fluorides by treatment with dimethyl(methylthio)-sulfonium tetrafluoroborate. Glycosidic linkages and most protective groups are not affected by the reaction conditions. Glycosyl fluorides are proposed to be intermediates in glycosylations promoted by dimethyl(methylthio)-sulfonium tetrafluoroborate.