Characterization of cocoa butters and other vegetable fats by pyrolysis-mass spectrometry

Pyrolysis Mass Spectrometry (Py-MS) was used for the discrimination of cocoa butters from other vegetable fats. Mass spectra ranging from 50 amu to 250 amu were analyzed by principal component analysis (PCA) and with neural nets. The application of neural nets leads to a good discrimination between the two classes. Detailed analysis of the nets revealed that only the first 60 masses were used within the net. The use of PCA requires a careful selection of the number of masses included in the calculation. Canonical variance analysis was applied to determine the significant masses. Optimal performance of PCA was observed only using the first 22 significant masses. Most of these masses were different from the ones used by the neural net. It seems that the mass spectra obtained by Py-MS contain sufficient information for the discrimination of pure cocoa butter from other vegetable fats, but none of the methods seems to be able to extract all information available. Neural net provides a very robust method for this task and no prior data selection was necessary. Received: 13 May 1996 / Revised: 7 August 1996 / Accepted: 7 August 1996     

Improved preparation and new reactions of β -(1-phenylthio) cyclopropyl enones

β-(1-Phenylthio)cyclopropyl enones can be conveniently prepared via reaction of the lithium salts of α-hydroxymethylene ketones with 1-lithio-1-phenylthiocyclopropane and are converted efficiently by treatment with aqueous acid to γ-keto cyclobutanones and less successfully by thermolysis to -γ-keto phenylthiocyclopentenes.     

Inductively coupled plasma mass spectrometry: Application to the determination of arsenic species

The application of ion-pair reversed phase chromatography (HPLC) and inductively coupled plasma mass spectrometry to the determination of six species of arsenic is described: arsenious acid (As^III), arsenic acid (As^V), monomethylarsinic acid (MMA), dimethylarsinic acid (DMA), arsenocholine (AsC) and arsenobetaine (AsB) in marine biota and in natural fresh water. The coupling conditions of HPLC-ICP-MS are given and also the evaluation of the extraction procedure applied to determine these species in marine organisms. The limits of detection are between 6 and 25 g.l^–1.     

ASSESSMENT OF GENOTOXICITY AND MUTAGENICITY OF 1,2-DIOXETANES IN HUMAN CELLS USING A PLASMID SHUTTLE VECTOR

Abstract— 1,2-Dioxetanes are efficient sources of triplet excited carbonyl compounds on thermal decomposition. They cause photochemical and photobiological transformations in the dark. In order to study the genotoxicity and mutagenicity of 1,2-dioxetanes, the replicating shuttle vector pZ189 was damaged with 3,3,4-trimethyl-l,2-dioxetane(TrMD) or 3-hydroxymethyl-3,4,4-trimethyl-l,2-dioxetane (HTMD) in vitro and subsequently transfected into normal human lymphoblasts. We found a dose-dependent increase of genotoxicity (decrease of plasmid survival) and increase of mutation frequency with both dioxetanes. However, TrMD was less mutagenic than HTMD at similar genotoxicity. Sequence analysis of the supF gene revealed more point mutations than deletions. Single base substitutions occurred exclusively at G:C sites: 94.6% of point mutations with TrMD and 100% with HTMD were G:C to T:A and G:C to C:G transversions. These are the typical mutations following 7,8-dihydro-8-oxoguanine (8-oxo-G) formation, the main DNA lesion induced by TrMD and HTMD. Only with TrMD we found 5.4% G:C to A:T transitions, probably reflecting the more pronounced ability of TrMD to form some pyrimidine dimers. Our results indicate that 8-oxo-G is also the most relevant modification in in vivo mutagenesis.     

Tandem GC/MS: A useful tool for studying end-capping reactions of oligo(styryl)lithium anions

Anionic living polymerization methods, using organometallic initiators such as butyllithium reagents, have proven useful for, inter alia, styrene polymerization and are amenable to subsequent functionalization of poly(styryl)lithium in the termination step. In this study, general methods for the selective preparation of small styrene oligomers and termination of the intermediate oligo(styryl)lithium anions were investigated. The crude reaction mixtures were analyzed directly by tandem gas chromatography/mass spectrometry (GC/MS). Of the carbon- and silicon-based electrophiles tested, chloro(chloroalkyl)silanes, Cl-SiR₂(CH₂)_nCl in particular, were shown by GC/MS to be regioselective end-capping reagents, thus allowing subsequent transformation to the primary amine. The combined GC/MS data allow not only an estimate of the degree of functionalization, but also the identification of by-products, thus providing insight into the end-capping process that otherwise might be difficult to access. © 1995 John Wiley & Sons, Inc.     

Anodic hydroxylation of 1-carbomethoxy-1,2,3,4-tetrahydrocarbazoles

1-Carbomethoxy-1,2,3,4-tetrahydrocarbazole (1) and its 7-methoxy derivative (2) were oxidized at carbon felt anodes in acetonitrile containing 0.2 M LiClO₄ and 2-17 M water at potentials on the rising portion of the primary oxidation peak to yield products formed by formal substitution of the C-1 H atom with hydroxide. The resulting 1-hydroxy-l-carbomethoxy-1,2,3,4-tetrahydrocarbazole and its 7-methoxy derivative were isolated in 44 and 22% yields, respectively, when sodium bicarbonate was used to control acidity of the medium. Structures were elucidated by NMR, IR, elemental analysis, and mass spectrometry. Voltammetry at carbon-paste and glassy carbon electrodes showed that the oxidations proceed by an ECE or DISPI pathway. The rate-determining step is the reaction of water with a cation radical electrochemically generated from 1 or 2, involving either proton abstraction or nucleophilic addition.     

Pyrimidine N-oxides. Preparation of 6-chloro-2,4-diaminopyrimidine 3-N-oxide and its reactions

The peroxyacid oxidation of 6-chloro-2,4-diaminopyrimidine ( 1 ) led to two products, 6-chloro-2,4-diaminopyrimidine 3-N-oxide ( 2 ) and 2,4-diamino-5,6-dichloropyrimidine 3-N-oxide ( 3 ). The assignment of structure of both of these compounds was made on the basis of ir, uv, nmr, and mass spectral data. A discussion of the pathways involved in the formation of 3 is presented.     

Solid state extrusion of thermoplastic elastomers 4

A solid state extrusion technique is applied as to produce oriented block copoly(ether ester) under various physical conditions. The morphology of the extruded samples is characterized in relation to the extrusion parameters and hard segment compositions of the polymer, using thermal analysis and X-ray methods. The lateral dimensions of the crystalline domains are found to be approximately 150 Å depending on the extrusion conditions. The statistics of the long range periodicity of the structure along the extrusion direction is in agreement with a one-dimensional two phase model, the crystalline portion of which does not vary much in thickness (35 – 45 Å). The unexpected increase in the long period and the thermal shrinkage suggest the existence of strained interlamellar amorphous chains (tie molecules). The observed variations in tensile properties are interpreted under the assumption that both the number of such tie molecules and their fully extended lengths are determined by the hard segment composition and the extrusion conditions. It is also argued that the increase in the glass transition temperature is not only a function of the composition of hard segments in the amorphous phase but also of the number of strained tie molecules.Herrn Dr. Dr. h. c. H. Hellmann zum 70. Geburtstag gewidmet.Part 3 cf. lit [11]     

Mass spectrometric behavior of levoglucosan under different ionization conditions and implications for studies of cellulose pyrolysis

Pyrolysis-mass spectrometric studies of cellulose indicate low abundances of levoglucosan in the product spectrum compared to the yield values determined in more conventional types of pyrolysis studies. To examine the reason for these conflicting observation, levoglucosan was examined under different ion source conditions and ionization modes to ascertain the relative contributions of thermal degradation and ionization fragmention to the low abundances of the levoglucosan molecular ion. Low-energy electron ionization using conventional sample volatilization and molecular-beam sampling is compared to chemical ionization using methane, isobutane, and ammonia as reagent gases, and to field ionization and desorption. The mass spectrometric fragmentation patterns under the various systems indicate that studies of cellulose pyrolysis underestimate the amount of levoglucosan formed due to ionization fragmentation and thermal rearrangement reactions in the ion source. Several peaks, including m/z 126 and 144, are dominated by the contribution from the fragmentation of levoglucosan.     

Microcalorimetric study on micellization of nonionic surfactants with a benzene ring or adamantane in their hydrophobic chains

The micellization of a novel family of nonionic surfactants poly(oxyethylene) glycol alkyl ethers has been studied by microcalorimetry. One of the surfactants has adamantane, and the other nonionic surfactants have a benzene ring in their hydrophobic chains, which moves from the terminal of the hydrophobic chain toward the headgroup. Moreover, the alkyl chain of the nonionic surfactants is straight or branched. Both the critical micelle concentration (cmc) and the thermodynamic parameters associated with the micelle formation have been obtained. The cmc decreases and the enthalpy of micelle formation (deltaH(mic)) becomes less positive gradually as the length of hydrophobic chain increases, whereas the values of cmc and deltaH(mic) tend to increase for the surfactants with a longer ethylene oxide chain. However, the deltaH(mic) value of the surfactant with seven carbon atoms in a hydrophobic chain is more positive than that of the surfactant with six carbon atoms in a hydrophobic chain. Comparing with the nonionic surfactant with a methylene hydrophobic chain, the surfactants with benzene rings and adamantane groups have larger cmc values and the cmc values increase with the size of the groups. Furthermore, moving the phenyl group from the terminal of the hydrophobic chain to the neighbor of the hydrophilic headgroup leads to the decreased cmc. Both the variation of hydrophobic interaction from the movement of phenyl group and pi-pi interaction among adjacent phenyl groups affect deltaH(mic) values.