Redetermination of the Crystal Structure of the 1,2,4,7-anti-tetramethylbicyclo[2.2.1]heptan-2-yl cation at 110 K

The structure of the 1,2,4,7-anti-tetramethylbicyclo[2.2.1]heptan-2-yl cation ( 1 ) was redetermined by X-ray crystal structure analysis of its Sb₂F₁₁ salt at 110 K (P2₁/c, R1 = 5.76%). The most important structural features of 1 are: C(1)? C(2) = 1.409(9), C(1)? C(6) = 1.710(8), and C(2)…C(6) = 2.113(9) Å and C(2)? C(1)? C(6) = 84.7(4)°. These results agree with those obtained earlier by other methods for the rapidly equilibrating, partially s?-delocalized 1,2-dimethylbicyclo[2.2.1]heptan-2-yl cation ( 2 ). The detailed experimental procedure for the preparation of crystalline 1 · Sb₂F₁₁ and the crystal selection and mounting are described.     

Anodic hydroxylation of 1-carbomethoxy-1,2,3,4-tetrahydrocarbazoles

1-Carbomethoxy-1,2,3,4-tetrahydrocarbazole (1) and its 7-methoxy derivative (2) were oxidized at carbon felt anodes in acetonitrile containing 0.2 M LiClO₄ and 2-17 M water at potentials on the rising portion of the primary oxidation peak to yield products formed by formal substitution of the C-1 H atom with hydroxide. The resulting 1-hydroxy-l-carbomethoxy-1,2,3,4-tetrahydrocarbazole and its 7-methoxy derivative were isolated in 44 and 22% yields, respectively, when sodium bicarbonate was used to control acidity of the medium. Structures were elucidated by NMR, IR, elemental analysis, and mass spectrometry. Voltammetry at carbon-paste and glassy carbon electrodes showed that the oxidations proceed by an ECE or DISPI pathway. The rate-determining step is the reaction of water with a cation radical electrochemically generated from 1 or 2, involving either proton abstraction or nucleophilic addition.     

Solid state extrusion of thermoplastic elastomers 4

A solid state extrusion technique is applied as to produce oriented block copoly(ether ester) under various physical conditions. The morphology of the extruded samples is characterized in relation to the extrusion parameters and hard segment compositions of the polymer, using thermal analysis and X-ray methods. The lateral dimensions of the crystalline domains are found to be approximately 150 Å depending on the extrusion conditions. The statistics of the long range periodicity of the structure along the extrusion direction is in agreement with a one-dimensional two phase model, the crystalline portion of which does not vary much in thickness (35 – 45 Å). The unexpected increase in the long period and the thermal shrinkage suggest the existence of strained interlamellar amorphous chains (tie molecules). The observed variations in tensile properties are interpreted under the assumption that both the number of such tie molecules and their fully extended lengths are determined by the hard segment composition and the extrusion conditions. It is also argued that the increase in the glass transition temperature is not only a function of the composition of hard segments in the amorphous phase but also of the number of strained tie molecules.Herrn Dr. Dr. h. c. H. Hellmann zum 70. Geburtstag gewidmet.Part 3 cf. lit [11]     

Mass spectrometric behavior of levoglucosan under different ionization conditions and implications for studies of cellulose pyrolysis

Pyrolysis-mass spectrometric studies of cellulose indicate low abundances of levoglucosan in the product spectrum compared to the yield values determined in more conventional types of pyrolysis studies. To examine the reason for these conflicting observation, levoglucosan was examined under different ion source conditions and ionization modes to ascertain the relative contributions of thermal degradation and ionization fragmention to the low abundances of the levoglucosan molecular ion. Low-energy electron ionization using conventional sample volatilization and molecular-beam sampling is compared to chemical ionization using methane, isobutane, and ammonia as reagent gases, and to field ionization and desorption. The mass spectrometric fragmentation patterns under the various systems indicate that studies of cellulose pyrolysis underestimate the amount of levoglucosan formed due to ionization fragmentation and thermal rearrangement reactions in the ion source. Several peaks, including m/z 126 and 144, are dominated by the contribution from the fragmentation of levoglucosan.     

Protection of immobilized sulfhydryl groups against autooxidation by alterations in their microenvironment

Immobilized sulfhydryl groups were prepared by partial thiolation of NH₂-glass beads. The microenvironment of the immobilized SH groups was varied by different chemical modifications of neighboring NH₂ groups. Introduction of a strong charge in the surroundings of immobilized sulfhydryls results in their dramatic stabilization against autooxidation. This effect is due to the salting of O₂ from the surface microlayer of the thiolated beads.     

Dampfdruck- und Leitfähigkeitsuntersuchungen der Ionensolvatation in Amiden

The solvating properties of formamide, N-methylformamide, dimethylformamide, N-ethylformamide and diethylformamide have been investigated by means of vapour pressure and conductivity measurements. For the salts and ions, resp. average solvation numbers have been calculated from vapour pressure data and limiting ionic conductances. The solvation numbers are used for a discussion of the influence of N-substituents on the solvating properties of the amides.

---

---

Mit 2 Abbildungen     

Quantum chemistry with an attached processor

The Floating Point Systems, Inc. Model 164 Attached Processor (FPS-164) is a high-speed, pipelined, parallel processor designed for large-scale scientific computation. Benchmark studies of operations common in quantum chemistry codes are discussed and the performance of the FPS-164 is compared with other commonly available computers. A complete system of electronic structure codes has been implemented on the FPS-164 using the Fortran-77 cross-compiler and calls to optimized vector and matrix routines. The conversion of a generalized valence bond (GVB ) code illustrates the strategy adopted to adapt Fortran codes to the FPS-164. A typical production example, a large scale (GVB ) and configuration interaction calculation on the vinyl radical, shows a net throughput equivalent to nearly nine VAX 11/780 computers.     

Rhodopsin exhibits a preference for solvation by polyunsaturated docosohexaenoic acid

An all-atom molecular dynamics simulation of rhodopsin in a membrane environment has been carried out with lipid composition similar to that of the retinal membrane. The initial conformation of the protein was taken from the X-ray crystallographic structure (1F88), while those of the lipids came from a previous molecular dynamics simulation. During the course of the 12.5 ns simulation, the initially randomly placed lipids adopt an anisotropic solvation structure around the protein. The lipids, having one saturated stearic acid chain and one polyunsaturated docosohexaenoic acid chain with a zwitterionic phosphatidylcholine headgroup, arrange themselves to maximize contact between the polyunsaturated chain and the protein surface. This organization is driven by energetically favorable interactions between the transmembrance helices and the docosohexaenoyl chains that are largely of the van der Waals type. These observations are consistent with various experimental studies on rhodopsin and other G-protein coupled receptors and with the picture of extreme flexibility in polyunsaturated fatty acid chains that has arisen from recent NMR and computational work.     

Structure of a 1:1 molecular complex of trans-9,10-dihydroxy-9,10-diphenyl-9,10-dihydroanthracene with ethanol

X-ray analysis of the title complex revealed hydrogen-bonded chains comprising two crystallographically independent types of $\text{trans}$-9,10-dihydroxy-9,10-diphenyl-9,10-dihydroanthracene molecules, in which the central 1,4-cyclohexadiene rings are respectively flat and very slightly puckered, with the ethanol molecules attached exclusively to the latter type.     

Studies on the Chemistry of Thienoannelated O , N - and S , N -Containing Heterocycles, 28 [1]. Synthesis of Imidazo[1,5- d ]thieno[2,3- b ][1,4]thiazine Derivatives as GABA -Receptor Ligands

Summary.  GABA-receptor-ligands are still very interesting in drug-development. Usually benzodiazepines are used in the treatment but they have serious side-effects. Thus, a recently synthesized quioxaline derivative which showed reduced side-effects in an animal model was used as a model-substance. The cyclus was modified to optimize the pharmacological profile. Accordingly, a series of imidazo-thieno-thiazines was synthesized starting from 5-acetyl-2-chloro-3-nitrothiophene to yield 6-ethyl-2,3-dihydro-1H-thieno[2,3-b][1,4]thiazine-2-one. Reaction with potassium tert-butoxide and diethylchlorophosphate gave an intermediate, which resulted in the desired ring system after adding the corresponding isocyanides and potassium tert-butoxide. Corresponding author. E-mail: thomas.erker@univie.ac.at Received August 6, 2002; accepted August 13, 2002