Carbon precipitation and diffusion in SiGeC alloys under silicon self-interstitial injection

In this work we investigate the diffusion and precipitation of supersaturated substitutional carbon in 200-nm-thick SiGeC layers buried under a silicon cap layer of 40 nm. The samples were annealed in either inert (N₂) or oxidizing (O₂) ambient at 850 °C for times ranging from 2 to 10 h. The silicon self-interstitial (I) flux coming from the surface under oxidation enhances the C diffusion with respect to the N₂-annealed samples. In the early stages of the oxidation process, the loss of C from the SiGeC layer by diffusion across the layer/cap interface dominates. This phenomenon saturates after an initial period (2–4 h), which depends on the C concentration. This saturation is due to the formation and growth of C-containing precipitates that are promoted by the I injection and act as a sink for mobile C atoms. The influence of carbon concentration on the competition between precipitation and diffusion is discussed. Received: 19 October 2001 / Accepted: 19 December 2001 / Published online: 20 March 2002 / Published online: 20 March 2002     

Observation of dielectronic satellites in the K-spectrum of argon ions in plasma produced by femtosecond laser pulses

The satellite structure of 1s2p ^1,3 P ₁-1s ²¹ S ₀ lines of the He-like argon ion in plasma produced by a 45-fs laser pulse in a gas-jet cluster target is measured with a high spectral resolution. Radiation transitions 2p → 1s from autoionizing states (AISs) are detected for ions ranging from Li-like to F-like. The spectrum observed is theoretically simulated with the use of the spectroscopic data for the AISs of multicharged ions obtained within the multiconfiguration relativistic Hartree-Fock method. Good agreement with experimental data is obtained when the main population channels of these states are taken into account for typical values of cluster-target plasma parameters.     

Generic replica symmetric field-theory for short range Ising spin glasses

Symmetry considerations and a direct, Hubbard-Stratonovich type, derivation are used to construct a replica field-theory relevant to the study of the spin glass transition of short range models in a magnetic field. A mean-field treatment reveals that two different types of transitions exist, whenever the replica number n is kept larger than zero. The Sherrington-Kirkpatrick critical point in zero magnetic field between the paramagnet and replica magnet (a replica symmetric phase with a nonzero spin glass order parameter) separates from the de Almeida-Thouless line, along which replica symmetry breaking occurs. We argue that for studying the de Almeida-Thouless transition around the upper critical dimension d = 6, it is necessary to use the generic cubic model with all the three bare masses and eight cubic couplings. The critical role n may play is also emphasized. To make perturbative calculations feasible, a new representation of the cubic interaction is introduced. To illustrate the method, we compute the masses in one-loop order. Some technical details and a list of vertex rules are presented to help future renormalisation-group calculations. Received 9 October 2001     

Invertible point transformations,Painlevé test,and the second Painlevé transcendent

The techniques of invertible point transformations and the Painlevé analysis can be used to construct integrable ordinary differential equations. We compare both techniques for the second Painlevé transcendent.     

The frequency scale of speech intonation.

In intonation research, prominence-lending pitch movements have either been described on a linear or on a logarithmic frequency scale. An experiment has been carried out to check whether pitch movements in speech intonation are perceived on one of these two scales or on a psychoacoustic scale representing the frequency selectivity of the auditory system. This last scale is intermediary between the other two scales. Subjects matched the excursion size of prominence-lending pitch movements in utterances resynthesized in different pitch registers. Their task was to adjust the excursion size in a comparison stimulus in such a way that it lent equal prominence to the corresponding syllable in a fixed test stimulus. The comparison stimulus and the test stimulus had pitches running parallel on either the logarithmic frequency scale, the psychoacoustic scale, or the linear frequency scale. In one-half of the experimental sessions, the test stimulus was presented in the low register, while the comparison stimulus was presented in the high register, and, conversely, for the other half of the sessions. The result is that, in all cases, stimuli are matched in such a way that the average excursion sizes in different registers are equal on the psychoacoustic scale.     

Theory of high temperature superconductivity in YBa2Cu3O7_δ

A theory of high temperature superconductivity in YBa₂Cu₃O₇__δ compound has been developed on the basis of the momentum pairing of electrons through the relativistic Darwin interaction. The transport behaviour of electrons is explained in terms of a mechanism of correlated electron transfer arising from the electron-phonon coupling. A model Hamiltonian has been developed to describe the superconducting properties of the system. This gives an energy gap which is higher than the BCS value. Attempts have been made to explain the absence of isotope effect, the linear dependence of specific heat, the presence of larger temperature-independent paramagnetism in the normal phase and the softening of some of the optic phonon modes observed in this system.     

Molecular dynamics simulation of processing using AFM pin tool

A three-dimensional molecular dynamics (MD) model is utilized to investigate the effect of tool geometry on the deformation process of the workpiece and the nature of deformation process at the atomic-scale. Results show that different states exist between the atomic force microscope (AFM) pin tool and the workpiece surface, i.e. the non-wear state, the ploughing state, the state in which ploughing is dominant and the state in which cutting plays a key role. A relationship between the deformation process of the workpiece and the potential energy variation is presented. The potential energy variation of atoms in different deformed regions in the workpiece such as plastically deformed region, elastically deformed region and the mixed deformation region is different. The features of variations of potential energy are discussed.     

Electrical behavior of the Au/MoS2 interface studied by light emission induced by scanning tunneling microscopy

Light emitted in the tunneling junction of a scanning tunneling microscope has been used to establish the electrical characteristics of nanojunctions made of Au islands deposited on flat MoS₂ surfaces. It is shown that these characteristics are those of rectifying contacts when the gold islands are isolated and that they evolve toward those of ohmic contacts when the island density increases. It is observed that the rectifying behavior also evolves over time as on infinite metal/semiconductor contacts. Using the STM tip, single gold islands can be manipulated on the MoS₂ surface so that their electrical behavior can be changed depending on their position with regard to the other islands.     

Effects of sputter deposition parameters and post-deposition annealing on the electrical characteristics of LaAlO3 dielectric films on Si

The influence of processing parameters on the electrical characteristics of RuO₂/LaAlO₃/Si metal-oxide-semiconductor structures was investigated. In particular, the sputtering regime during deposition of LaAlO₃ on Si and the atmosphere used in the post-deposition annealing step were addressed by determining capacitance-voltage and gate current-voltage characteristics. These results were correlated with compositional information obtained by Rutherford backscattering spectrometry and nuclear reaction analysis. A post-deposition annealing step in oxygen at 600 °C resulted in better electrical characteristics of the final structure as compared to the same treatment performed in nitrogen. This result is explained by oxygen ability to heal oxygen vacancies in the LaAlO₃ film, especially at the dielectric/semiconductor interface region. A thermalized sputtering regime during deposition of LaAlO₃ on Si leads to capacitors with electrical characteristics superior to those deposited in ballistic regime. PACS 77.84.Dy; 81.15.Cd; 81.40.Gh; 73.40.Qv; 82.80.Yc